From: Matthias Heidbrink Date: Mon, 24 Mar 2014 20:50:07 +0000 (+0100) Subject: serial-dmm: Implemented support for Voltcraft M-3650CR (driver voltcraft-m3650cr). X-Git-Tag: libsigrok-0.3.0~117 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=e83437ae206dea1bce85c8b46f7c56ebb9667bda;p=libsigrok.git serial-dmm: Implemented support for Voltcraft M-3650CR (driver voltcraft-m3650cr). --- diff --git a/hardware/common/dmm/metex14.c b/hardware/common/dmm/metex14.c index 7aa22a76..8151aa9d 100644 --- a/hardware/common/dmm/metex14.c +++ b/hardware/common/dmm/metex14.c @@ -18,9 +18,12 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/* +/** + * @file + * * Metex 14-bytes ASCII protocol parser. * + * @internal * This should work for various multimeters which use this kind of protocol, * even though there is some variation in which modes each DMM supports. * @@ -36,7 +39,9 @@ #define LOG_PREFIX "metex14" -static int parse_value(const uint8_t *buf, float *result) +/** Parse value from buf, byte 2-8. */ +static int parse_value(const uint8_t *buf, struct metex14_info *info, + float *result) { int i, is_ol, cnt; char valstr[7 + 1]; @@ -64,6 +69,21 @@ static int parse_value(const uint8_t *buf, float *result) return SR_OK; } + /* Logic functions */ + if (!strcmp((const char *)&valstr, "READY") || + !strcmp((const char *)&valstr, "FLOAT")) { + *result = INFINITY; + info->is_logic = TRUE; + } else if (!strcmp((const char *)&valstr, "Hi")) { + *result = 1.0; + info->is_logic = TRUE; + } else if (!strcmp((const char *)&valstr, "Lo")) { + *result = 0.0; + info->is_logic = TRUE; + } + if (info->is_logic) + return SR_OK; + /* Bytes 2-8: Sign, value (up to 5 digits) and decimal point */ sscanf((const char *)&valstr, "%f", result); @@ -78,25 +98,9 @@ static void parse_flags(const char *buf, struct metex14_info *info) char unit[4 + 1]; const char *u; - /* Bytes 0-1: Measurement mode */ - /* Note: Protocol doesn't distinguish "resistance" from "beep" mode. */ - info->is_ac = !strncmp(buf, "AC", 2); - info->is_dc = !strncmp(buf, "DC", 2); - info->is_resistance = !strncmp(buf, "OH", 2); - info->is_capacity = !strncmp(buf, "CA", 2); - info->is_temperature = !strncmp(buf, "TE", 2); - info->is_diode = !strncmp(buf, "DI", 2); - info->is_frequency = !strncmp(buf, "FR", 2); - info->is_gain = !strncmp(buf, "DB", 2); - info->is_hfe = !strncmp(buf, "HF", 2); - - /* - * Note: "DB" shows the logarithmic ratio of input voltage to a - * pre-stored (user-changeable) value in the DMM. - */ - - if (info->is_dc || info->is_ac) - info->is_volt = TRUE; + /* Bytes 0-1: Measurement mode AC, DC */ + info->is_ac = !strncmp(buf, "AC", 2); + info->is_dc = !strncmp(buf, "DC", 2); /* Bytes 2-8: See parse_value(). */ @@ -140,6 +144,27 @@ static void parse_flags(const char *buf, struct metex14_info *info) else if (!strcasecmp(u, "")) info->is_unitless = TRUE; + /* Bytes 0-1: Measurement mode, except AC/DC */ + info->is_resistance = !strncmp(buf, "OH", 2) || + (!strncmp(buf, " ", 2) && info->is_ohm); + info->is_capacity = !strncmp(buf, "CA", 2) || + (!strncmp(buf, " ", 2) && info->is_farad); + info->is_temperature = !strncmp(buf, "TE", 2); + info->is_diode = !strncmp(buf, "DI", 2) || + (!strncmp(buf, " ", 2) && info->is_volt && info->is_milli); + info->is_frequency = !strncmp(buf, "FR", 2) || + (!strncmp(buf, " ", 2) && info->is_hertz); + info->is_gain = !strncmp(buf, "DB", 2); + info->is_hfe = !strncmp(buf, "HF", 2) || + (!strncmp(buf, " ", 2) && !info->is_volt && !info->is_ohm && + !info->is_logic && !info->is_farad && !info->is_hertz); + /* + * Note: + * - Protocol doesn't distinguish "resistance" from "beep" mode. + * - "DB" shows the logarithmic ratio of input voltage to a + * pre-stored (user-changeable) value in the DMM. + */ + /* Byte 13: Always '\r' (carriage return, 0x0d, 13) */ } @@ -197,6 +222,10 @@ static void handle_flags(struct sr_datafeed_analog *analog, float *floatval, analog->mq = SR_MQ_GAIN; analog->unit = SR_UNIT_UNITLESS; } + if (info->is_logic) { + analog->mq = SR_MQ_GAIN; + analog->unit = SR_UNIT_UNITLESS; + } /* Measurement related flags */ if (info->is_ac) @@ -300,12 +329,13 @@ SR_PRIV int sr_metex14_parse(const uint8_t *buf, float *floatval, /* Don't print byte 13. That one contains the carriage return. */ sr_dbg("DMM packet: \"%.13s\"", buf); - if ((ret = parse_value(buf, floatval)) != SR_OK) { + memset(info_local, 0x00, sizeof(struct metex14_info)); + + if ((ret = parse_value(buf, info_local, floatval)) != SR_OK) { sr_dbg("Error parsing value: %d.", ret); return ret; } - memset(info_local, 0x00, sizeof(struct metex14_info)); parse_flags((const char *)buf, info_local); handle_flags(analog, floatval, info_local); diff --git a/hardware/serial-dmm/api.c b/hardware/serial-dmm/api.c index ebb8f02c..93487920 100644 --- a/hardware/serial-dmm/api.c +++ b/hardware/serial-dmm/api.c @@ -57,6 +57,7 @@ SR_PRIV struct sr_dev_driver radioshack_22_168_driver_info; SR_PRIV struct sr_dev_driver radioshack_22_805_driver_info; SR_PRIV struct sr_dev_driver radioshack_22_812_driver_info; SR_PRIV struct sr_dev_driver tecpel_dmm_8061_ser_driver_info; +SR_PRIV struct sr_dev_driver voltcraft_m3650cr_driver_info; SR_PRIV struct sr_dev_driver voltcraft_m3650d_driver_info; SR_PRIV struct sr_dev_driver voltcraft_m4650cr_driver_info; SR_PRIV struct sr_dev_driver voltcraft_me42_driver_info; @@ -188,6 +189,13 @@ SR_PRIV struct dmm_info dmms[] = { &tecpel_dmm_8061_ser_driver_info, receive_data_TECPEL_DMM_8061_SER, }, + { + "Voltcraft", "M-3650CR", "1200/7n2/rts=0/dtr=1", 1200, + METEX14_PACKET_SIZE, sr_metex14_packet_request, + sr_metex14_packet_valid, sr_metex14_parse, + NULL, + &voltcraft_m3650cr_driver_info, receive_data_VOLTCRAFT_M3650CR, + }, { "Voltcraft", "M-3650D", "1200/7n2/rts=0/dtr=1", 1200, METEX14_PACKET_SIZE, sr_metex14_packet_request, @@ -605,6 +613,7 @@ DRV(radioshack_22_168, RADIOSHACK_22_168, "radioshack-22-168", "RadioShack 22-16 DRV(radioshack_22_805, RADIOSHACK_22_805, "radioshack-22-805", "RadioShack 22-805") DRV(radioshack_22_812, RADIOSHACK_22_812, "radioshack-22-812", "RadioShack 22-812") DRV(tecpel_dmm_8061_ser, TECPEL_DMM_8061_SER, "tecpel-dmm-8061-ser", "Tecpel DMM-8061 (UT-D02 cable)") +DRV(voltcraft_m3650cr, VOLTCRAFT_M3650CR, "voltcraft-m3650cr", "Voltcraft M-3650CR") DRV(voltcraft_m3650d, VOLTCRAFT_M3650D, "voltcraft-m3650d", "Voltcraft M-3650D") DRV(voltcraft_m4650cr, VOLTCRAFT_M4650CR, "voltcraft-m4650cr", "Voltcraft M-4650CR") DRV(voltcraft_me42, VOLTCRAFT_ME42, "voltcraft-me42", "Voltcraft ME-42") diff --git a/hardware/serial-dmm/protocol.c b/hardware/serial-dmm/protocol.c index 6e91aec9..1c0f3f56 100644 --- a/hardware/serial-dmm/protocol.c +++ b/hardware/serial-dmm/protocol.c @@ -176,6 +176,7 @@ RECEIVE_DATA(RADIOSHACK_22_168, metex14) RECEIVE_DATA(RADIOSHACK_22_805, metex14) RECEIVE_DATA(RADIOSHACK_22_812, rs9lcd) RECEIVE_DATA(TECPEL_DMM_8061_SER, fs9721) +RECEIVE_DATA(VOLTCRAFT_M3650CR, metex14) RECEIVE_DATA(VOLTCRAFT_M3650D, metex14) RECEIVE_DATA(VOLTCRAFT_M4650CR, metex14) RECEIVE_DATA(VOLTCRAFT_ME42, metex14) diff --git a/hardware/serial-dmm/protocol.h b/hardware/serial-dmm/protocol.h index 8db0e635..f96e43da 100644 --- a/hardware/serial-dmm/protocol.h +++ b/hardware/serial-dmm/protocol.h @@ -39,6 +39,7 @@ enum { RADIOSHACK_22_805, RADIOSHACK_22_812, TECPEL_DMM_8061_SER, + VOLTCRAFT_M3650CR, VOLTCRAFT_M3650D, VOLTCRAFT_M4650CR, VOLTCRAFT_ME42, @@ -124,6 +125,7 @@ SR_PRIV int receive_data_RADIOSHACK_22_168(int fd, int revents, void *cb_data); SR_PRIV int receive_data_RADIOSHACK_22_805(int fd, int revents, void *cb_data); SR_PRIV int receive_data_RADIOSHACK_22_812(int fd, int revents, void *cb_data); SR_PRIV int receive_data_TECPEL_DMM_8061_SER(int fd, int revents, void *cb_data); +SR_PRIV int receive_data_VOLTCRAFT_M3650CR(int fd, int revents, void *cb_data); SR_PRIV int receive_data_VOLTCRAFT_M3650D(int fd, int revents, void *cb_data); SR_PRIV int receive_data_VOLTCRAFT_M4650CR(int fd, int revents, void *cb_data); SR_PRIV int receive_data_VOLTCRAFT_ME42(int fd, int revents, void *cb_data); diff --git a/hwdriver.c b/hwdriver.c index dff0732e..5deef6bb 100644 --- a/hwdriver.c +++ b/hwdriver.c @@ -246,6 +246,7 @@ extern SR_PRIV struct sr_dev_driver radioshack_22_168_driver_info; extern SR_PRIV struct sr_dev_driver radioshack_22_805_driver_info; extern SR_PRIV struct sr_dev_driver radioshack_22_812_driver_info; extern SR_PRIV struct sr_dev_driver tecpel_dmm_8061_ser_driver_info; +extern SR_PRIV struct sr_dev_driver voltcraft_m3650cr_driver_info; extern SR_PRIV struct sr_dev_driver voltcraft_m3650d_driver_info; extern SR_PRIV struct sr_dev_driver voltcraft_m4650cr_driver_info; extern SR_PRIV struct sr_dev_driver voltcraft_me42_driver_info; @@ -311,7 +312,7 @@ static struct sr_dev_driver *drivers_list[] = { #endif #ifdef HAVE_HW_GMC_MH_1X_2X &gmc_mh_1x_2x_rs232_driver_info, - &gmc_mh_2x_bd232_driver_info, + &gmc_mh_2x_bd232_driver_info, #endif #ifdef HAVE_HW_HAMEG_HMO &hameg_hmo_driver_info, @@ -403,6 +404,7 @@ static struct sr_dev_driver *drivers_list[] = { &radioshack_22_805_driver_info, &radioshack_22_812_driver_info, &tecpel_dmm_8061_ser_driver_info, + &voltcraft_m3650cr_driver_info, &voltcraft_m3650d_driver_info, &voltcraft_m4650cr_driver_info, &voltcraft_me42_driver_info, diff --git a/libsigrok-internal.h b/libsigrok-internal.h index 54b23e32..3d71f597 100644 --- a/libsigrok-internal.h +++ b/libsigrok-internal.h @@ -591,7 +591,7 @@ struct metex14_info { gboolean is_diode, is_frequency, is_ampere, is_volt, is_farad; gboolean is_hertz, is_ohm, is_celsius, is_pico, is_nano, is_micro; gboolean is_milli, is_kilo, is_mega, is_gain, is_decibel, is_hfe; - gboolean is_unitless; + gboolean is_unitless, is_logic; }; #ifdef HAVE_LIBSERIALPORT