From: Bert Vermeulen Date: Tue, 26 Jun 2012 21:26:55 +0000 (+0200) Subject: hantek-dso: start sending the frame only from the trigger point X-Git-Tag: dsupstream~900 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=e749a8cb50029b6275a32a60c351d65f14fdf601;p=libsigrok.git hantek-dso: start sending the frame only from the trigger point Samples received before the trigger point are stored. From the trigger point on, every chunk received from the device is sent up the session bus. After the device has finished sending, the stored samples are transmitted. --- diff --git a/hardware/hantek-dso/api.c b/hardware/hantek-dso/api.c index c9310336..5701f4d5 100644 --- a/hardware/hantek-dso/api.c +++ b/hardware/hantek-dso/api.c @@ -544,35 +544,19 @@ static int hw_dev_config_set(int dev_index, int hwcap, const void *value) return ret; } -/* Called by libusb (as triggered by handle_event()) when a transfer comes in. - * Only channel data comes in asynchronously, and all transfers for this are - * queued up beforehand, so this just needs so chuck the incoming data onto - * the libsigrok session bus. - */ -static void receive_transfer(struct libusb_transfer *transfer) +static void send_chunk(struct context *ctx, unsigned char *buf, + int num_samples) { struct sr_datafeed_packet packet; struct sr_datafeed_analog analog; - struct context *ctx; float ch1, ch2, range; int num_probes, data_offset, i; - ctx = transfer->user_data; - sr_dbg("hantek-dso: receive_transfer(): status %d received %d bytes", - transfer->status, transfer->actual_length); - - if (transfer->actual_length == 0) - /* Nothing to send to the bus. */ - return; - - ctx->current_transfer += transfer->actual_length; - sr_dbg("hantek-dso: got %d of %d in frame", ctx->current_transfer, ctx->framesize * 2); - num_probes = (ctx->ch1_enabled && ctx->ch2_enabled) ? 2 : 1; packet.type = SR_DF_ANALOG; packet.payload = &analog; /* TODO: support for 5xxx series 9-bit samples */ - analog.num_samples = transfer->actual_length / 2; + analog.num_samples = num_samples; analog.mq = SR_MQ_VOLTAGE; analog.unit = SR_UNIT_VOLT; analog.data = g_try_malloc(analog.num_samples * sizeof(float) * num_probes); @@ -590,24 +574,100 @@ static void receive_transfer(struct libusb_transfer *transfer) /* TODO: support for 5xxx series 9-bit samples */ if (ctx->ch1_enabled) { range = ((float)vdivs[ctx->voltage_ch1].p / vdivs[ctx->voltage_ch1].q) * 8; - ch1 = range / 255 * *(transfer->buffer + i * 2 + 1); + ch1 = range / 255 * *(buf + i * 2 + 1); /* Value is centered around 0V. */ ch1 -= range / 2; analog.data[data_offset++] = ch1; } if (ctx->ch2_enabled) { range = ((float)vdivs[ctx->voltage_ch2].p / vdivs[ctx->voltage_ch2].q) * 8; - ch2 = range / 255 * *(transfer->buffer + i * 2); + ch2 = range / 255 * *(buf + i * 2); ch2 -= range / 2; analog.data[data_offset++] = ch2; } } + sr_session_send(ctx->cb_data, &packet); + +} + +/* Called by libusb (as triggered by handle_event()) when a transfer comes in. + * Only channel data comes in asynchronously, and all transfers for this are + * queued up beforehand, so this just needs so chuck the incoming data onto + * the libsigrok session bus. + */ +static void receive_transfer(struct libusb_transfer *transfer) +{ + struct sr_datafeed_packet packet; + struct context *ctx; + int num_samples, pre; + + ctx = transfer->user_data; + sr_dbg("hantek-dso: receive_transfer(): status %d received %d bytes", + transfer->status, transfer->actual_length); + + if (transfer->actual_length == 0) + /* Nothing to send to the bus. */ + return; + + num_samples = transfer->actual_length / 2; + + sr_dbg("hantek-dso: got %d-%d/%d samples in frame", ctx->samp_received + 1, + ctx->samp_received + num_samples, ctx->framesize); + + /* The device always sends a full frame, but the beginning of the frame + * doesn't represent the trigger point. The offset at which the trigger + * happened came in with the capture state, so we need to start sending + * from there up the session bus. The samples in the frame buffer before + * that trigger point came after the end of the device's frame buffer was + * reached, and it wrapped around to overwrite up until the trigger point. + */ + if (ctx->samp_received < ctx->trigger_offset) { + /* Trigger point not yet reached. */ + if (ctx->samp_received + num_samples < ctx->trigger_offset) { + /* The entire chunk is before the trigger point. */ + memcpy(ctx->framebuf + ctx->samp_buffered * 2, + transfer->buffer, num_samples * 2); + ctx->samp_buffered += num_samples; + } else { + /* This chunk hits or overruns the trigger point. + * Store the part before the trigger fired, and + * send the rest up to the session bus. */ + pre = ctx->trigger_offset - ctx->samp_received; + memcpy(ctx->framebuf + ctx->samp_buffered * 2, + transfer->buffer, pre * 2); + ctx->samp_buffered += pre; + + /* The rest of this chunk starts with the trigger point. */ + sr_dbg("hantek-dso: reached trigger point, %d samples buffered", + ctx->samp_buffered); + + /* Avoid the corner case where the chunk ended at + * exactly the trigger point. */ + if (num_samples > pre) + send_chunk(ctx, transfer->buffer + pre * 2, + num_samples - pre); + } + } else { + /* Already past the trigger point, just send it all out. */ + send_chunk(ctx, transfer->buffer, + num_samples); + } + + ctx->samp_received += num_samples; + + /* Everything in this transfer was either copied to the buffer or + * sent to the session bus. */ g_free(transfer->buffer); libusb_free_transfer(transfer); - sr_session_send(ctx->cb_data, &packet); - if (ctx->current_transfer >= ctx->framesize * 2) { - /* That's the last chunk in this frame. */ + if (ctx->samp_received >= ctx->framesize) { + /* That was the last chunk in this frame. Send the buffered + * pre-trigger samples out now, in one big chunk. */ + sr_dbg("hantek-dso: end of frame, sending %d pre-trigger buffered samples", + ctx->samp_buffered); + send_chunk(ctx, ctx->framebuf, ctx->samp_buffered); + + /* Mark the end of this frame. */ packet.type = SR_DF_FRAME_END; sr_session_send(ctx->cb_data, &packet); @@ -617,7 +677,6 @@ static void receive_transfer(struct libusb_transfer *transfer) packet.type = SR_DF_END; sr_session_send(ctx->cb_data, &packet); } else { - ctx->current_transfer = 0; ctx->dev_state = NEW_CAPTURE; } } @@ -629,6 +688,7 @@ static int handle_event(int fd, int revents, void *cb_data) struct sr_datafeed_packet packet; struct timeval tv; struct context *ctx; + int num_probes; uint32_t trigger_offset; uint8_t capturestate; @@ -678,6 +738,13 @@ static int handle_event(int fd, int revents, void *cb_data) /* no data yet */ break; case CAPTURE_READY_8BIT: + /* Remember where in the captured frame the trigger is. */ + ctx->trigger_offset = trigger_offset; + + num_probes = (ctx->ch1_enabled && ctx->ch2_enabled) ? 2 : 1; + ctx->framebuf = g_try_malloc(ctx->framesize * num_probes * 2); + ctx->samp_buffered = ctx->samp_received = 0; + /* Tell the scope to send us the first frame. */ if (dso_get_channeldata(ctx, receive_transfer) != SR_OK) break; diff --git a/hardware/hantek-dso/dso.c b/hardware/hantek-dso/dso.c index 75832c8a..e9d74dfb 100644 --- a/hardware/hantek-dso/dso.c +++ b/hardware/hantek-dso/dso.c @@ -672,7 +672,7 @@ SR_PRIV int dso_get_capturestate(struct context *ctx, uint8_t *capturestate, */ bitvalue = 1; for (i = 0; i < 24; i++) { - // Each set bit inverts all bits with a lower value + /* Each set bit inverts all bits with a lower value. */ if(toff & bitvalue) toff ^= bitvalue - 1; bitvalue <<= 1; diff --git a/hardware/hantek-dso/dso.h b/hardware/hantek-dso/dso.h index ac260147..e21be0ee 100644 --- a/hardware/hantek-dso/dso.h +++ b/hardware/hantek-dso/dso.h @@ -173,9 +173,9 @@ struct context { GTimeVal fw_updated; int epin_maxpacketsize; int capture_empty_count; - int current_transfer; int dev_state; + /* Oscilloscope settings. */ int timebase; gboolean ch1_enabled; gboolean ch2_enabled; @@ -188,7 +188,7 @@ struct context { float voffset_ch2; float voffset_trigger; uint16_t channel_levels[2][9][2]; - int framesize; + unsigned int framesize; gboolean filter_ch1; gboolean filter_ch2; gboolean filter_trigger; @@ -196,6 +196,12 @@ struct context { char *triggersource; float triggerposition; int triggermode; + + /* Frame transfer */ + unsigned int samp_received; + unsigned int samp_buffered; + unsigned int trigger_offset; + unsigned char *framebuf; }; SR_PRIV int dso_open(int dev_index);