From: Uwe Hermann Date: Tue, 8 Oct 2013 15:46:59 +0000 (+0200) Subject: onewire_link: Add/use annotation helpers. X-Git-Tag: libsigrokdecode-0.3.0~287 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=ddeb9b32167075938aa96af0f71acfa190a9c3e1;p=libsigrokdecode.git onewire_link: Add/use annotation helpers. --- diff --git a/decoders/onewire_link/pd.py b/decoders/onewire_link/pd.py index da6275c..b875770 100644 --- a/decoders/onewire_link/pd.py +++ b/decoders/onewire_link/pd.py @@ -54,6 +54,18 @@ class Decoder(srd.Decoder): ['Warnings', 'Human-readable warnings'], ] + def putm(self, data): + self.put(0, 0, self.out_ann, data) + + def putpb(self, data): + self.put(self.fall, self.samplenum, self.out_proto, data) + + def putb(self, data): + self.put(self.fall, self.samplenum, self.out_ann, data) + + def putx(self, data): + self.put(self.fall, self.cnt_bit[self.overdrive], self.out_ann, data) + def __init__(self, **kwargs): self.samplenum = 0 self.state = 'WAIT FOR FALLING EDGE' @@ -74,22 +86,18 @@ class Decoder(srd.Decoder): # Check if samplerate is appropriate. if self.options['overdrive']: if self.samplerate < 2000000: - self.put(0, 0, self.out_ann, [1, - ['ERROR: Sampling rate is too low. Must be above 2MHz ' + - 'for proper overdrive mode decoding.']]) + self.putm([1, ['Sampling rate is too low. Must be above ' + + '2MHz for proper overdrive mode decoding.']]) elif self.samplerate < 5000000: - self.put(0, 0, self.out_ann, [1, - ['WARNING: Sampling rate is suggested to be above 5MHz ' + - 'for proper overdrive mode decoding.']]) + self.putm([1, ['Sampling rate is suggested to be above 5MHz ' + + 'for proper overdrive mode decoding.']]) else: if self.samplerate < 400000: - self.put(0, 0, self.out_ann, [1, - ['ERROR: Sampling rate is too low. Must be above ' + - '400kHz for proper normal mode decoding.']]) + self.putm([1, ['Sampling rate is too low. Must be above ' + + '400kHz for proper normal mode decoding.']]) elif (self.samplerate < 1000000): - self.put(0, 0, self.out_ann, [1, - ['WARNING: Sampling rate is suggested to be above ' + - '1MHz for proper normal mode decoding.']]) + self.putm([1, ['Sampling rate is suggested to be above ' + + '1MHz for proper normal mode decoding.']]) # The default 1-Wire time base is 30us. This is used to calculate # sampling times. @@ -138,32 +146,28 @@ class Decoder(srd.Decoder): time_min = float(self.cnt_normal_bit) / self.samplerate time_max = float(self.cnt_normal_bit + 1) / self.samplerate if (time_min < 0.000005) or (time_max > 0.000015): - self.put(0, 0, self.out_ann, [1, - ['WARNING: The normal mode data sample time interval ' + + self.putm([1, ['The normal mode data sample time interval ' + '(%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).' % (time_min * 1000000, time_max * 1000000)]]) time_min = float(self.cnt_normal_presence) / self.samplerate time_max = float(self.cnt_normal_presence + 1) / self.samplerate if (time_min < 0.0000681) or (time_max > 0.000075): - self.put(0, 0, self.out_ann, [1, - ['WARNING: The normal mode presence sample time interval ' + + self.putm([1, ['The normal mode presence sample time interval ' + '(%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).' % (time_min * 1000000, time_max * 1000000)]]) time_min = float(self.cnt_overdrive_bit) / self.samplerate time_max = float(self.cnt_overdrive_bit + 1) / self.samplerate if (time_min < 0.000001) or (time_max > 0.000002): - self.put(0, 0, self.out_ann, [1, - ['WARNING: The overdrive mode data sample time interval ' + + self.putm([1, ['The overdrive mode data sample time interval ' + '(%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).' % (time_min * 1000000, time_max * 1000000)]]) time_min = float(self.cnt_overdrive_presence) / self.samplerate time_max = float(self.cnt_overdrive_presence + 1) / self.samplerate if (time_min < 0.0000073) or (time_max > 0.000010): - self.put(0, 0, self.out_ann, [1, - ['WARNING: The overdrive mode presence sample time interval ' + + self.putm([1, ['The overdrive mode presence sample time interval ' + '(%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).' % (time_min*1000000, time_max*1000000)]]) @@ -199,18 +203,15 @@ class Decoder(srd.Decoder): self.state = 'WAIT FOR RISING EDGE' continue - self.put(self.fall, self.samplenum, self.out_ann, - [0, ['Bit: %d' % self.bit]]) - self.put(self.fall, self.samplenum, self.out_proto, - ['BIT', self.bit]) + self.putb([0, ['Bit: %d' % self.bit]]) + self.putpb(['BIT', self.bit]) # Checking the first command to see if overdrive mode # should be entered. if self.bit_cnt <= 8: self.command |= (self.bit << self.bit_cnt) elif self.bit_cnt == 8 and self.command in [0x3c, 0x69]: - self.put(self.fall, self.cnt_bit[self.overdrive], - self.out_ann, [0, ['Entering overdrive mode']]) + self.putx([0, ['Entering overdrive mode']]) # Increment the bit counter. self.bit_cnt += 1 # Wait for next slot. @@ -228,8 +229,7 @@ class Decoder(srd.Decoder): self.state = 'WAIT FOR PRESENCE DETECT' # Exit overdrive mode. if self.overdrive: - self.put(self.fall, self.cnt_bit[self.overdrive], - self.out_ann, [0, ['Exiting overdrive mode']]) + self.putx([0, ['Exiting overdrive mode']]) self.overdrive = 0 # Clear command bit counter and data register. self.bit_cnt = 0 @@ -258,11 +258,10 @@ class Decoder(srd.Decoder): self.state = 'WAIT FOR RISING EDGE' continue - self.put(self.fall, self.samplenum, self.out_ann, - [0, ['Reset/presence: %s' - % ('false' if self.present else 'true')]]) - self.put(self.fall, self.samplenum, self.out_proto, - ['RESET/PRESENCE', not self.present]) + p = 'false' if self.present else 'true' + self.putb([0, ['Reset/presence: %s' % p]]) + self.putpb(['RESET/PRESENCE', not self.present]) + # Wait for next slot. self.state = 'WAIT FOR FALLING EDGE' else: