From: Uwe Hermann Date: Mon, 29 Aug 2016 15:48:18 +0000 (+0200) Subject: Remove some unneeded double-spaces. X-Git-Tag: libsigrok-0.5.0~229 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=d9251a2c9f1ca4380c27240ccca90c9f9ed46d3f;p=libsigrok.git Remove some unneeded double-spaces. (also perform some other minor whitespace fixes while at it) --- diff --git a/src/dmm/bm25x.c b/src/dmm/bm25x.c index 4966eedb..385d246e 100644 --- a/src/dmm/bm25x.c +++ b/src/dmm/bm25x.c @@ -209,7 +209,7 @@ SR_PRIV int sr_brymen_bm25x_parse(const uint8_t *buf, float *floatval, val = -val; *floatval = val; - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/dtm0660.c b/src/dmm/dtm0660.c index 66e894af..e9c20bfb 100644 --- a/src/dmm/dtm0660.c +++ b/src/dmm/dtm0660.c @@ -384,7 +384,7 @@ SR_PRIV int sr_dtm0660_parse(const uint8_t *buf, float *floatval, parse_flags(buf, info_local); handle_flags(analog, floatval, &exponent, info_local); - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/fs9721.c b/src/dmm/fs9721.c index d4a857d3..9fbcd289 100644 --- a/src/dmm/fs9721.c +++ b/src/dmm/fs9721.c @@ -364,7 +364,7 @@ SR_PRIV int sr_fs9721_parse(const uint8_t *buf, float *floatval, parse_flags(buf, info_local); handle_flags(analog, floatval, &exponent, info_local); - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/fs9922.c b/src/dmm/fs9922.c index 11fc7736..6e745412 100644 --- a/src/dmm/fs9922.c +++ b/src/dmm/fs9922.c @@ -370,7 +370,7 @@ SR_PRIV int sr_fs9922_parse(const uint8_t *buf, float *floatval, parse_flags(buf, info_local); handle_flags(analog, floatval, &exponent, info_local); - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/metex14.c b/src/dmm/metex14.c index 2677484a..8198082a 100644 --- a/src/dmm/metex14.c +++ b/src/dmm/metex14.c @@ -153,17 +153,17 @@ static void parse_flags(const char *buf, struct metex14_info *info) info->is_unitless = TRUE; /* Bytes 0-1: Measurement mode, except AC/DC */ - info->is_resistance = !strncmp(buf, "OH", 2) || + info->is_resistance = !strncmp(buf, "OH", 2) || (!strncmp(buf, " ", 2) && info->is_ohm); - info->is_capacity = !strncmp(buf, "CA", 2) || + info->is_capacity = !strncmp(buf, "CA", 2) || (!strncmp(buf, " ", 2) && info->is_farad); info->is_temperature = !strncmp(buf, "TE", 2); - info->is_diode = !strncmp(buf, "DI", 2) || + info->is_diode = !strncmp(buf, "DI", 2) || (!strncmp(buf, " ", 2) && info->is_volt && info->is_milli); - info->is_frequency = !strncmp(buf, "FR", 2) || + info->is_frequency = !strncmp(buf, "FR", 2) || (!strncmp(buf, " ", 2) && info->is_hertz); - info->is_gain = !strncmp(buf, "DB", 2); - info->is_hfe = !strncmp(buf, "HF", 2) || + info->is_gain = !strncmp(buf, "DB", 2); + info->is_hfe = !strncmp(buf, "HF", 2) || (!strncmp(buf, " ", 2) && !info->is_volt && !info->is_ohm && !info->is_logic && !info->is_farad && !info->is_hertz); /* @@ -350,7 +350,7 @@ SR_PRIV int sr_metex14_parse(const uint8_t *buf, float *floatval, parse_flags((const char *)buf, info_local); handle_flags(analog, floatval, &exponent, info_local); - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/rs9lcd.c b/src/dmm/rs9lcd.c index ed542815..5f4d8668 100644 --- a/src/dmm/rs9lcd.c +++ b/src/dmm/rs9lcd.c @@ -438,7 +438,7 @@ SR_PRIV int sr_rs9lcd_parse(const uint8_t *buf, float *floatval, *floatval = rawval; - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/ut71x.c b/src/dmm/ut71x.c index 442b6e12..23f72c2d 100644 --- a/src/dmm/ut71x.c +++ b/src/dmm/ut71x.c @@ -343,7 +343,7 @@ SR_PRIV int sr_ut71x_parse(const uint8_t *buf, float *floatval, handle_flags(analog, floatval, info); - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/dmm/vc870.c b/src/dmm/vc870.c index 43be935e..a2b2b72a 100644 --- a/src/dmm/vc870.c +++ b/src/dmm/vc870.c @@ -167,7 +167,7 @@ static int parse_range(uint8_t b, float *floatval, int *exponent, static void parse_flags(const uint8_t *buf, struct vc870_info *info) { - /* Bytes 0/1: Function / function select */ + /* Bytes 0/1: Function / function select */ /* Note: Some of these mappings are fixed up later. */ switch (buf[0]) { case 0x30: /* DCV / ACV */ @@ -429,7 +429,7 @@ SR_PRIV int sr_vc870_parse(const uint8_t *buf, float *floatval, handle_flags(analog, floatval, info_local); - analog->encoding->digits = -exponent; + analog->encoding->digits = -exponent; analog->spec->spec_digits = -exponent; return SR_OK; diff --git a/src/drivers.c b/src/drivers.c index d2763414..c6165b63 100644 --- a/src/drivers.c +++ b/src/drivers.c @@ -27,7 +27,7 @@ * sr_driver_list is a special section contains pointers to all the hardware * drivers built into the library. The __start and __stop symbols are * auto-generated by the linker (OSX needs a little help) and point to the start - * and end of the section. They are used to iterate over the list of all + * and end of the section. They are used to iterate over the list of all * drivers. */ #ifdef __APPLE__ diff --git a/src/hardware/agilent-dmm/agilent-dmm.h b/src/hardware/agilent-dmm/agilent-dmm.h index 1e829055..e89c7c14 100644 --- a/src/hardware/agilent-dmm/agilent-dmm.h +++ b/src/hardware/agilent-dmm/agilent-dmm.h @@ -22,7 +22,7 @@ #define LOG_PREFIX "agilent-dmm" -#define AGDMM_BUFSIZE 256 +#define AGDMM_BUFSIZE 256 /* Always USB-serial, 1ms is plenty. */ #define SERIAL_WRITE_TIMEOUT_MS 1 diff --git a/src/hardware/agilent-dmm/sched.c b/src/hardware/agilent-dmm/sched.c index eeda2b5c..27dddc7f 100644 --- a/src/hardware/agilent-dmm/sched.c +++ b/src/hardware/agilent-dmm/sched.c @@ -480,14 +480,14 @@ static int recv_conf_u124x_5x(const struct sr_dev_inst *sdi, GMatchInfo *match) devc->mode_squarewave = 0; - rstr = g_match_info_fetch(match, 4); + rstr = g_match_info_fetch(match, 4); if (rstr && sr_atoi(rstr, &resolution) == SR_OK) { devc->cur_digits = -resolution; devc->cur_encoding = -resolution + 1; } g_free(rstr); - mstr = g_match_info_fetch(match, 1); + mstr = g_match_info_fetch(match, 1); if (!strncmp(mstr, "VOLT", 4)) { devc->cur_mq = SR_MQ_VOLTAGE; devc->cur_unit = SR_UNIT_VOLT; @@ -553,7 +553,7 @@ static int recv_conf_u124x_5x(const struct sr_dev_inst *sdi, GMatchInfo *match) devc->cur_digits = 4; devc->cur_encoding = 5; } else if (!strncmp(mstr, "T1", 2) || !strncmp(mstr, "T2", 2) || - !strncmp(mstr, "TEMP", 2)) { + !strncmp(mstr, "TEMP", 2)) { devc->cur_mq = SR_MQ_TEMPERATURE; m2 = g_match_info_fetch(match, 2); if (!strcmp(m2, "FAR")) diff --git a/src/hardware/appa-55ii/protocol.c b/src/hardware/appa-55ii/protocol.c index ef265ff0..c22ede50 100644 --- a/src/hardware/appa-55ii/protocol.c +++ b/src/hardware/appa-55ii/protocol.c @@ -23,11 +23,11 @@ #include "protocol.h" typedef enum { - LIVE_DATA = 0x00, - LOG_METADATA = 0x11, - LOG_DATA = 0x14, - LOG_START = 0x18, - LOG_END = 0x19, + LIVE_DATA = 0x00, + LOG_METADATA = 0x11, + LOG_DATA = 0x14, + LOG_START = 0x18, + LOG_END = 0x19, } packet_type; static gboolean appa_55ii_checksum(const uint8_t *buf) diff --git a/src/hardware/appa-55ii/protocol.h b/src/hardware/appa-55ii/protocol.h index eeae8e1a..248d672e 100644 --- a/src/hardware/appa-55ii/protocol.h +++ b/src/hardware/appa-55ii/protocol.h @@ -27,9 +27,9 @@ #define LOG_PREFIX "appa-55ii" -#define APPA_55II_NUM_CHANNELS 2 -#define APPA_55II_BUF_SIZE (4 + 32 + 1) -#define DEFAULT_DATA_SOURCE DATA_SOURCE_LIVE +#define APPA_55II_NUM_CHANNELS 2 +#define APPA_55II_BUF_SIZE (4 + 32 + 1) +#define DEFAULT_DATA_SOURCE DATA_SOURCE_LIVE enum { DATA_SOURCE_LIVE, @@ -40,7 +40,7 @@ enum { struct dev_context { /* Acquisition settings */ struct sr_sw_limits limits; - gboolean data_source; /**< Whether to read live samples or memory */ + gboolean data_source; /**< Whether to read live samples or memory */ /* Temporary state across callbacks */ uint8_t buf[APPA_55II_BUF_SIZE]; diff --git a/src/hardware/brymen-bm86x/protocol.c b/src/hardware/brymen-bm86x/protocol.c index f6ccc306..3181fef0 100644 --- a/src/hardware/brymen-bm86x/protocol.c +++ b/src/hardware/brymen-bm86x/protocol.c @@ -153,11 +153,11 @@ static void brymen_bm86x_parse(unsigned char *buf, float *floatval, buf[15] &= ~0x04; /* SI prefix */ - if (buf[14] & 0x40) { floatval[0] *= 1e-9; digits[0] += 9; } /* n */ - if (buf[15] & 0x08) { floatval[0] *= 1e-6; digits[0] += 6; } /* µ */ - if (buf[15] & 0x04) { floatval[0] *= 1e-3; digits[0] += 3; } /* m */ - if (buf[15] & 0x40) { floatval[0] *= 1e3; digits[0] -= 3; } /* k */ - if (buf[15] & 0x20) { floatval[0] *= 1e6; digits[0] -= 6; } /* M */ + if (buf[14] & 0x40) { floatval[0] *= 1e-9; digits[0] += 9; } /* n */ + if (buf[15] & 0x08) { floatval[0] *= 1e-6; digits[0] += 6; } /* µ */ + if (buf[15] & 0x04) { floatval[0] *= 1e-3; digits[0] += 3; } /* m */ + if (buf[15] & 0x40) { floatval[0] *= 1e3; digits[0] -= 3; } /* k */ + if (buf[15] & 0x20) { floatval[0] *= 1e6; digits[0] -= 6; } /* M */ if (over_limit) floatval[0] = INFINITY; @@ -192,10 +192,10 @@ static void brymen_bm86x_parse(unsigned char *buf, float *floatval, if (buf[9] & 0x20) analog[1].meaning->mqflags |= SR_MQFLAG_AC; /* SI prefix */ - if (buf[ 9] & 0x01) { floatval[1] *= 1e-6; digits[1] += 6; } /* µ */ - if (buf[ 9] & 0x02) { floatval[1] *= 1e-3; digits[1] += 3; } /* m */ - if (buf[14] & 0x02) { floatval[1] *= 1e3; digits[1] -= 3; } /* k */ - if (buf[14] & 0x01) { floatval[1] *= 1e6; digits[1] -= 6; } /* M */ + if (buf[ 9] & 0x01) { floatval[1] *= 1e-6; digits[1] += 6; } /* µ */ + if (buf[ 9] & 0x02) { floatval[1] *= 1e-3; digits[1] += 3; } /* m */ + if (buf[14] & 0x02) { floatval[1] *= 1e3; digits[1] -= 3; } /* k */ + if (buf[14] & 0x01) { floatval[1] *= 1e6; digits[1] -= 6; } /* M */ analog[1].encoding->digits = digits[1]; analog[1].spec->spec_digits = digits[1]; @@ -260,7 +260,7 @@ static int brymen_bm86x_send_command(const struct sr_dev_inst *sdi) sr_dbg("Sending HID set report."); ret = libusb_control_transfer(usb->devhdl, - LIBUSB_REQUEST_TYPE_CLASS | + LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE | LIBUSB_ENDPOINT_OUT, 9, /* bRequest: HID set_report */ diff --git a/src/hardware/cem-dt-885x/protocol.c b/src/hardware/cem-dt-885x/protocol.c index 77b2f6ad..88fa8b7f 100644 --- a/src/hardware/cem-dt-885x/protocol.c +++ b/src/hardware/cem-dt-885x/protocol.c @@ -770,11 +770,11 @@ SR_PRIV int cem_dt_885x_meas_range_set(const struct sr_dev_inst *sdi, devc = sdi->priv; if (low == 30 && high == 130) token = TOKEN_MEAS_RANGE_30_130; - else if (low == 30 && high == 80) + else if (low == 30 && high == 80) token = TOKEN_MEAS_RANGE_30_80; - else if (low == 50 && high == 100) + else if (low == 50 && high == 100) token = TOKEN_MEAS_RANGE_50_100; - else if (low == 80 && high == 130) + else if (low == 80 && high == 130) token = TOKEN_MEAS_RANGE_80_130; else return SR_ERR; diff --git a/src/hardware/colead-slm/protocol.c b/src/hardware/colead-slm/protocol.c index d5c75b3c..2f6957ab 100644 --- a/src/hardware/colead-slm/protocol.c +++ b/src/hardware/colead-slm/protocol.c @@ -138,7 +138,7 @@ static void process_packet(const struct sr_dev_inst *sdi) case 0x9: /* Mean over a time period between 11 seconds and 24 hours. * Which is so silly that there's no point in expressing - * either this or the previous case. */ + * either this or the previous case. */ analog.meaning->mqflags |= SR_MQFLAG_SPL_LAT \ | SR_MQFLAG_SPL_FREQ_WEIGHT_A \ | SR_MQFLAG_SPL_TIME_WEIGHT_F; diff --git a/src/hardware/conrad-digi-35-cpu/api.c b/src/hardware/conrad-digi-35-cpu/api.c index d50b446e..cfa503d5 100644 --- a/src/hardware/conrad-digi-35-cpu/api.c +++ b/src/hardware/conrad-digi-35-cpu/api.c @@ -17,9 +17,12 @@ * along with this program. If not, see . */ -/** @file - * Conrad DIGI 35 CPU power supply driver - * @internal +/** + * @file + * + * Conrad DIGI 35 CPU power supply driver + * + * @internal */ #include diff --git a/src/hardware/conrad-digi-35-cpu/protocol.h b/src/hardware/conrad-digi-35-cpu/protocol.h index 340cc23b..99d2cb70 100644 --- a/src/hardware/conrad-digi-35-cpu/protocol.h +++ b/src/hardware/conrad-digi-35-cpu/protocol.h @@ -19,7 +19,9 @@ /** * @file + * * Conrad DIGI 35 CPU power supply driver + * * @internal */ diff --git a/src/hardware/demo/demo.c b/src/hardware/demo/demo.c index baf715ba..a1f8c6bf 100644 --- a/src/hardware/demo/demo.c +++ b/src/hardware/demo/demo.c @@ -30,16 +30,16 @@ #define LOG_PREFIX "demo" -#define DEFAULT_NUM_LOGIC_CHANNELS 8 -#define DEFAULT_NUM_ANALOG_CHANNELS 4 +#define DEFAULT_NUM_LOGIC_CHANNELS 8 +#define DEFAULT_NUM_ANALOG_CHANNELS 4 /* The size in bytes of chunks to send through the session bus. */ -#define LOGIC_BUFSIZE 4096 +#define LOGIC_BUFSIZE 4096 /* Size of the analog pattern space per channel. */ -#define ANALOG_BUFSIZE 4096 +#define ANALOG_BUFSIZE 4096 -#define DEFAULT_ANALOG_AMPLITUDE 10 -#define ANALOG_SAMPLES_PER_PERIOD 20 +#define DEFAULT_ANALOG_AMPLITUDE 10 +#define ANALOG_SAMPLES_PER_PERIOD 20 /* Logic patterns we can generate. */ enum { @@ -663,10 +663,8 @@ static void logic_generator(struct sr_dev_inst *sdi, uint64_t size) } static void send_analog_packet(struct analog_gen *ag, - struct sr_dev_inst *sdi, - uint64_t *analog_sent, - uint64_t analog_pos, - uint64_t analog_todo) + struct sr_dev_inst *sdi, uint64_t *analog_sent, + uint64_t analog_pos, uint64_t analog_todo) { struct sr_datafeed_packet packet; struct dev_context *devc; diff --git a/src/hardware/fluke-dmm/fluke-dmm.h b/src/hardware/fluke-dmm/fluke-dmm.h index ecfa36cb..a54c7ef0 100644 --- a/src/hardware/fluke-dmm/fluke-dmm.h +++ b/src/hardware/fluke-dmm/fluke-dmm.h @@ -22,7 +22,7 @@ #define LOG_PREFIX "fluke-dmm" -#define FLUKEDMM_BUFSIZE 256 +#define FLUKEDMM_BUFSIZE 256 /* Always USB-serial, 1ms is plenty. */ #define SERIAL_WRITE_TIMEOUT_MS 1 diff --git a/src/hardware/ftdi-la/api.c b/src/hardware/ftdi-la/api.c index 22715a1f..0927d3a2 100644 --- a/src/hardware/ftdi-la/api.c +++ b/src/hardware/ftdi-la/api.c @@ -120,7 +120,7 @@ static void scan_device(struct ftdi_context *ftdic, model = g_malloc(32); serial_num = g_malloc(32); rv = ftdi_usb_get_strings(ftdic, dev, vendor, 32, - model, 32, serial_num, 32); + model, 32, serial_num, 32); switch (rv) { case 0: break; diff --git a/src/hardware/fx2lafw/protocol.c b/src/hardware/fx2lafw/protocol.c index fc875d04..70186518 100644 --- a/src/hardware/fx2lafw/protocol.c +++ b/src/hardware/fx2lafw/protocol.c @@ -403,7 +403,7 @@ SR_PRIV void mso_send_data_proc(struct sr_dev_inst *sdi, /* Send the logic */ for (i = 0; i < length; i++) { - devc->logic_buffer[i] = data[i * 2]; + devc->logic_buffer[i] = data[i * 2]; /* Rescale to -10V - +10V from 0-255. */ devc->analog_buffer[i] = (data[i * 2 + 1] - 128.0f) / 12.8f; }; diff --git a/src/hardware/gmc-mh-1x-2x/api.c b/src/hardware/gmc-mh-1x-2x/api.c index 048a0afc..303d435b 100644 --- a/src/hardware/gmc-mh-1x-2x/api.c +++ b/src/hardware/gmc-mh-1x-2x/api.c @@ -17,9 +17,12 @@ * along with this program. If not, see . */ -/** @file - * Gossen Metrawatt Metrahit 1x/2x drivers - * @internal +/** + * @file + * + * Gossen Metrawatt Metrahit 1x/2x drivers + * + * @internal */ #include @@ -40,7 +43,7 @@ static const uint32_t scanopts[] = { /** Hardware capabilities for Metrahit 1x/2x devices in send mode. */ static const uint32_t devopts_sm[] = { SR_CONF_MULTIMETER, - SR_CONF_THERMOMETER, /**< All GMC 1x/2x multimeters seem to support this */ + SR_CONF_THERMOMETER, /**< All GMC 1x/2x multimeters seem to support this */ SR_CONF_CONTINUOUS, SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, @@ -49,7 +52,7 @@ static const uint32_t devopts_sm[] = { /** Hardware capabilities for Metrahit 2x devices in bidirectional Mode. */ static const uint32_t devopts_bd[] = { SR_CONF_MULTIMETER, - SR_CONF_THERMOMETER, /**< All GMC 1x/2x multimeters seem to support this */ + SR_CONF_THERMOMETER, /**< All GMC 1x/2x multimeters seem to support this */ SR_CONF_CONTINUOUS, SR_CONF_LIMIT_SAMPLES | SR_CONF_GET | SR_CONF_SET, SR_CONF_LIMIT_MSEC | SR_CONF_GET | SR_CONF_SET, @@ -118,7 +121,7 @@ static enum model scan_model_sm(struct sr_serial_dev_inst *serial) for (cnt = 0; cnt < 4; cnt++) { byte = read_byte(serial, timeout_us); if ((byte == -1) || - ((byte & MSGID_MASK) != MSGID_DATA)) + ((byte & MSGID_MASK) != MSGID_DATA)) { model = METRAHIT_NONE; bytecnt = 100; diff --git a/src/hardware/gmc-mh-1x-2x/protocol.c b/src/hardware/gmc-mh-1x-2x/protocol.c index 93f28e80..20bf81fc 100644 --- a/src/hardware/gmc-mh-1x-2x/protocol.c +++ b/src/hardware/gmc-mh-1x-2x/protocol.c @@ -17,9 +17,12 @@ * along with this program. If not, see . */ -/** @file - * Gossen Metrawatt Metrahit 1x/2x drivers - * @internal +/** + * @file + * + * Gossen Metrawatt Metrahit 1x/2x drivers + * + * @internal */ #include @@ -783,7 +786,7 @@ static void process_msg_inf_10(struct sr_dev_inst *sdi) devc->value += pow(10.0, cnt) * dgt; } sr_spew("process_msg_inf_10() value=%f scale=%d scalet=%d", - devc->value, devc->scale, devc->scale1000); + devc->value, devc->scale, devc->scale1000); if (devc->value != NAN) devc->value *= pow(10, devc->scale) * pow(1000.0, devc->scale1000); @@ -880,9 +883,11 @@ static void process_msg_inf_13(struct sr_dev_inst *sdi) send_value(sdi); } -/** Dump contents of 14-byte message. - * @param buf Pointer to array of 14 data bytes. - * @param[in] raw Write only data bytes, no interpretation. +/** + * Dump contents of 14-byte message. + * + * @param buf Pointer to array of 14 data bytes. + * @param[in] raw Write only data bytes, no interpretation. */ static void dump_msg14(guchar *buf, gboolean raw) { @@ -903,10 +908,11 @@ static void dump_msg14(guchar *buf, gboolean raw) buf[12], buf[13]); } -/** Calc checksum for 14 byte message type. +/** + * Calc checksum for 14 byte message type. * - * @param[in] dta Pointer to array of 13 data bytes. - * @return Checksum. + * @param[in] dta Pointer to array of 13 data bytes. + * @return Checksum. */ static guchar calc_chksum_14(guchar *dta) { @@ -924,7 +930,7 @@ static int chk_msg14(struct sr_dev_inst *sdi) struct dev_context *devc; int retc; gboolean isreq; /* Message is request to multimeter (otherwise response) */ - uint8_t addr; /* Adaptor address */ + uint8_t addr; /* Adaptor address */ retc = SR_OK; @@ -1024,7 +1030,7 @@ SR_PRIV int process_msg14(struct sr_dev_inst *sdi) sr_spew("Measurement Function: %d ", (int)devc->buf[7]); decode_ctmv_2x(devc->buf[7], devc); sr_spew("Range: 0x%x", devc->buf[8]); - decode_rs_2x_TR2(devc->buf[8] & 0x0f, devc); /* Docs wrong, uses conversion table TR_2! */ + decode_rs_2x_TR2(devc->buf[8] & 0x0f, devc); /* Docs wrong, uses conversion table TR_2! */ devc->autorng = (devc->buf[8] & 0x20) == 0; // TODO 9, 10: 29S special functions devc->ubatt = 0.1 * (float)devc->buf[11]; @@ -1035,7 +1041,7 @@ SR_PRIV int process_msg14(struct sr_dev_inst *sdi) sr_spew("Internal version %d.%d", (int)devc->buf[5], (int)devc->buf[4]); sr_spew("Comm mode: 0x%x", (int)devc->buf[6]); sr_spew("Block cnt%%64: %d", (int)devc->buf[7]); - sr_spew("drpCi: %d drpCh: %d", (int)devc->buf[8], (int)devc->buf[9]); + sr_spew("drpCi: %d drpCh: %d", (int)devc->buf[8], (int)devc->buf[9]); // Semantics undocumented. Possibly Metrahit 29S dropouts stuff? break; default: @@ -1248,13 +1254,15 @@ SR_PRIV int gmc_mh_2x_receive_data(int fd, int revents, void *cb_data) return TRUE; } -/** Create 14 (42) byte command for Metrahit 2x multimeter in bidir mode. +/** + * Create 14 (42) byte command for Metrahit 2x multimeter in bidir mode. * - * Actually creates 42 bytes due to the encoding method used. - * @param[in] addr Device address (0=adapter, 1..15 multimeter; for byte 0). - * @param[in] func Function code (byte 3). - * @param[in] params Further parameters (9 bytes) - * @param[out] buf Buffer to create msg in (42 bytes). + * Actually creates 42 bytes due to the encoding method used. + * + * @param[in] addr Device address (0=adapter, 1..15 multimeter; for byte 0). + * @param[in] func Function code (byte 3). + * @param[in] params Further parameters (9 bytes) + * @param[out] buf Buffer to create msg in (42 bytes). */ static void create_cmd_14(guchar addr, guchar func, guchar *params, guchar *buf) { @@ -1316,8 +1324,11 @@ int req_meas14(const struct sr_dev_inst *sdi) return SR_OK; } -/** Request status from 2x multimeter (msg 3). - * @param[in] power_on Try to power on powered off multimeter by sending additional messages. +/** + * Request status from 2x multimeter (msg 3). + * + * @param[in] power_on Try to power on powered off multimeter by sending + * additional messages. */ int req_stat14(const struct sr_dev_inst *sdi, gboolean power_on) { @@ -1412,11 +1423,12 @@ SR_PRIV int gmc_decode_model_sm(uint8_t mcode) } } -/** Convert GMC model code in bidirectional mode to sigrok-internal one. +/** + * Convert GMC model code in bidirectional mode to sigrok-internal one. * - * @param[in] mcode Model code. + * @param[in] mcode Model code. * - * @return Model code. + * @return Model code. */ SR_PRIV int gmc_decode_model_bd(uint8_t mcode) { @@ -1447,11 +1459,12 @@ SR_PRIV int gmc_decode_model_bd(uint8_t mcode) } } -/** Convert sigrok-internal model code to string. +/** + * Convert sigrok-internal model code to string. * - * @param[in] mcode Model code. + * @param[in] mcode Model code. * - * @return Model code string. + * @return Model code string. */ SR_PRIV const char *gmc_model_str(enum model mcode) { diff --git a/src/hardware/gmc-mh-1x-2x/protocol.h b/src/hardware/gmc-mh-1x-2x/protocol.h index 8668ff34..52563d95 100644 --- a/src/hardware/gmc-mh-1x-2x/protocol.h +++ b/src/hardware/gmc-mh-1x-2x/protocol.h @@ -17,9 +17,12 @@ * along with this program. If not, see . */ -/** @file - * Gossen Metrawatt Metrahit 1x/2x drivers - * @internal +/** + * @file + * + * Gossen Metrawatt Metrahit 1x/2x drivers + * + * @internal */ #ifndef LIBSIGROK_HARDWARE_GMC_MH_1X_2X_PROTOCOL_H @@ -42,7 +45,7 @@ #define MSGID_DTA 0x20 /**< Start of data message, displayed, averaged */ #define MSGID_DATA 0x30 /**< Data byte in message */ -#define MSGC_MASK 0x0f /**< Mask to get message byte contents in send mode */ +#define MSGC_MASK 0x0f /**< Mask to get message byte contents in send mode */ #define MSGSRC_MASK 0xc0 /**< Mask to get bits related to message source */ diff --git a/src/hardware/gwinstek-gds-800/api.c b/src/hardware/gwinstek-gds-800/api.c index 2889a814..99c29a3e 100644 --- a/src/hardware/gwinstek-gds-800/api.c +++ b/src/hardware/gwinstek-gds-800/api.c @@ -66,8 +66,8 @@ static struct sr_dev_inst *probe_device(struct sr_scpi_dev_inst *scpi) devc = g_malloc0(sizeof(struct dev_context)); devc->frame_limit = 1; - devc->sample_rate = 0.; - devc->df_started = FALSE; + devc->sample_rate = 0.0; + devc->df_started = FALSE; sdi->priv = devc; sr_channel_new(sdi, 0, SR_CHANNEL_ANALOG, TRUE, "CH1"); diff --git a/src/hardware/hameg-hmo/protocol.c b/src/hardware/hameg-hmo/protocol.c index 2681a8f0..85712f8d 100644 --- a/src/hardware/hameg-hmo/protocol.c +++ b/src/hardware/hameg-hmo/protocol.c @@ -284,7 +284,7 @@ static void scope_state_dump(const struct scope_config *config, for (i = 0; i < config->analog_channels; i++) { tmp = sr_voltage_string((*config->vdivs)[state->analog_channels[i].vdiv][0], (*config->vdivs)[state->analog_channels[i].vdiv][1]); - sr_info("State of analog channel %d -> %s : %s (coupling) %s (vdiv) %2.2e (offset)", + sr_info("State of analog channel %d -> %s : %s (coupling) %s (vdiv) %2.2e (offset)", i + 1, state->analog_channels[i].state ? "On" : "Off", (*config->coupling_options)[state->analog_channels[i].coupling], tmp, state->analog_channels[i].vertical_offset); diff --git a/src/hardware/hantek-6xxx/api.c b/src/hardware/hantek-6xxx/api.c index 349b557b..0f00cd3e 100644 --- a/src/hardware/hantek-6xxx/api.c +++ b/src/hardware/hantek-6xxx/api.c @@ -307,7 +307,7 @@ static int dev_open(struct sr_dev_inst *sdi) err = libusb_claim_interface(usb->devhdl, USB_INTERFACE); if (err != 0) { sr_err("Unable to claim interface: %s.", - libusb_error_name(err)); + libusb_error_name(err)); return SR_ERR; } diff --git a/src/hardware/hantek-6xxx/protocol.h b/src/hardware/hantek-6xxx/protocol.h index c32792e3..0e3e04d4 100644 --- a/src/hardware/hantek-6xxx/protocol.h +++ b/src/hardware/hantek-6xxx/protocol.h @@ -31,7 +31,7 @@ #define MAX_RENUM_DELAY_MS 3000 #define DEFAULT_VOLTAGE 2 -#define DEFAULT_COUPLING COUPLING_DC +#define DEFAULT_COUPLING COUPLING_DC #define DEFAULT_SAMPLERATE SR_MHZ(8) #define NUM_CHANNELS 2 @@ -43,7 +43,7 @@ SR_KHZ(100), #define SAMPLERATE_REGS \ - 48, 30, 24, 16, 8, 4, 1, 50, 20, 10, + 48, 30, 24, 16, 8, 4, 1, 50, 20, 10, #define VDIV_VALUES \ { 100, 1000 }, \ diff --git a/src/hardware/hantek-dso/api.c b/src/hardware/hantek-dso/api.c index e9aa4e58..7b99b0f0 100644 --- a/src/hardware/hantek-dso/api.c +++ b/src/hardware/hantek-dso/api.c @@ -39,8 +39,8 @@ /* TODO tune this properly */ #define TICK 1 -#define NUM_TIMEBASE 10 -#define NUM_VDIV 8 +#define NUM_TIMEBASE 10 +#define NUM_VDIV 8 #define NUM_BUFFER_SIZES 2 @@ -389,7 +389,7 @@ static int dev_open(struct sr_dev_inst *sdi) err = libusb_claim_interface(usb->devhdl, USB_INTERFACE); if (err != 0) { sr_err("Unable to claim interface: %s.", - libusb_error_name(err)); + libusb_error_name(err)); return SR_ERR; } @@ -767,7 +767,7 @@ static void LIBUSB_CALL receive_transfer(struct libusb_transfer *transfer) num_samples = transfer->actual_length / 2; sr_spew("Got %d-%d/%d samples in frame.", devc->samp_received + 1, - devc->samp_received + num_samples, devc->framesize); + devc->samp_received + num_samples, devc->framesize); /* * The device always sends a full frame, but the beginning of the frame @@ -798,7 +798,7 @@ static void LIBUSB_CALL receive_transfer(struct libusb_transfer *transfer) /* The rest of this chunk starts with the trigger point. */ sr_dbg("Reached trigger point, %d samples buffered.", - devc->samp_buffered); + devc->samp_buffered); /* Avoid the corner case where the chunk ended at * exactly the trigger point. */ @@ -822,7 +822,7 @@ static void LIBUSB_CALL receive_transfer(struct libusb_transfer *transfer) /* That was the last chunk in this frame. Send the buffered * pre-trigger samples out now, in one big chunk. */ sr_dbg("End of frame, sending %d pre-trigger buffered samples.", - devc->samp_buffered); + devc->samp_buffered); send_chunk(sdi, devc->framebuf, devc->samp_buffered); /* Mark the end of this frame. */ diff --git a/src/hardware/hp-3457a/protocol.c b/src/hardware/hp-3457a/protocol.c index bf673fde..dd8d6f8f 100644 --- a/src/hardware/hp-3457a/protocol.c +++ b/src/hardware/hp-3457a/protocol.c @@ -67,7 +67,7 @@ static const struct rear_card_info rear_card_parameters[] = { }; static int send_mq_ac_dc(struct sr_scpi_dev_inst *scpi, const char *mode, - enum sr_mqflag flags) + enum sr_mqflag flags) { const char *ac_flag, *dc_flag; diff --git a/src/hardware/hung-chang-dso-2100/protocol.c b/src/hardware/hung-chang-dso-2100/protocol.c index cfe84f41..160e5a0c 100644 --- a/src/hardware/hung-chang-dso-2100/protocol.c +++ b/src/hardware/hung-chang-dso-2100/protocol.c @@ -79,11 +79,11 @@ * trigger on (rising or falling) * The next state is 0x0C * 0x0C Same as state 0x0F but expects the calibration - * value for the first channel's position + * value for the first channel's position * (POS1 in the schematics) * The next state is 0x0D * 0x0D Same as state 0x0F but expects the calibration - * value for the second channel's position + * value for the second channel's position * (POS2 in the schematics) * The next state is 0x0E * 0x0E Same as state 0x0F but expects the trigger level diff --git a/src/hardware/kecheng-kc-330b/api.c b/src/hardware/kecheng-kc-330b/api.c index a4e62619..30bb1b2a 100644 --- a/src/hardware/kecheng-kc-330b/api.c +++ b/src/hardware/kecheng-kc-330b/api.c @@ -184,7 +184,7 @@ static int dev_close(struct sr_dev_inst *sdi) usb = sdi->conn; if (!usb->devhdl) - /* Nothing to do. */ + /* Nothing to do. */ return SR_OK; /* This allows a frontend to configure the device without ever diff --git a/src/hardware/lascar-el-usb/api.c b/src/hardware/lascar-el-usb/api.c index 405c8f92..96ed3616 100644 --- a/src/hardware/lascar-el-usb/api.c +++ b/src/hardware/lascar-el-usb/api.c @@ -109,7 +109,7 @@ static int dev_close(struct sr_dev_inst *sdi) usb = sdi->conn; if (!usb->devhdl) - /* Nothing to do. */ + /* Nothing to do. */ return SR_OK; libusb_release_interface(usb->devhdl, LASCAR_INTERFACE); diff --git a/src/hardware/manson-hcs-3xxx/api.c b/src/hardware/manson-hcs-3xxx/api.c index 97a9a300..59e30d3f 100644 --- a/src/hardware/manson-hcs-3xxx/api.c +++ b/src/hardware/manson-hcs-3xxx/api.c @@ -19,10 +19,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/** @file - * Manson HCS-3xxx series power supply driver - * @internal - */ +/** + * @file + * + * Manson HCS-3xxx series power supply driver + * + * @internal + */ #include #include "protocol.h" diff --git a/src/hardware/manson-hcs-3xxx/protocol.c b/src/hardware/manson-hcs-3xxx/protocol.c index 04e18a5f..7a377832 100644 --- a/src/hardware/manson-hcs-3xxx/protocol.c +++ b/src/hardware/manson-hcs-3xxx/protocol.c @@ -19,10 +19,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/** @file - * Manson HCS-3xxx Series power supply driver - * @internal - */ +/** + * @file + * + * Manson HCS-3xxx Series power supply driver + * + * @internal + */ #include #include "protocol.h" @@ -56,10 +59,12 @@ SR_PRIV int hcs_send_cmd(struct sr_serial_dev_inst *serial, const char *cmd, ... /** * Read data from interface into buffer blocking until @a lines number of \\r chars * received. + * * @param serial Previously initialized serial port structure. * @param[in] lines Number of \\r-terminated lines to read (1-n). - * @param buf Buffer for result. Contents is NUL-terminated on success. + * @param buf Buffer for result. Contents is NUL-terminated on success. * @param[in] buflen Buffer length (>0). + * * @retval SR_OK Lines received and ending with "OK\r" (success). * @retval SR_ERR Error. * @retval SR_ERR_ARG Invalid argument. diff --git a/src/hardware/manson-hcs-3xxx/protocol.h b/src/hardware/manson-hcs-3xxx/protocol.h index bb898f20..df8814ed 100644 --- a/src/hardware/manson-hcs-3xxx/protocol.h +++ b/src/hardware/manson-hcs-3xxx/protocol.h @@ -19,10 +19,13 @@ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ -/** @file - * Manson HCS-3xxx Series power supply driver - * @internal - */ +/** + * @file + * + * Manson HCS-3xxx Series power supply driver + * + * @internal + */ #ifndef LIBSIGROK_HARDWARE_MANSON_HCS_3XXX_PROTOCOL_H #define LIBSIGROK_HARDWARE_MANSON_HCS_3XXX_PROTOCOL_H diff --git a/src/hardware/maynuo-m97/api.c b/src/hardware/maynuo-m97/api.c index 68225431..3ded72e9 100644 --- a/src/hardware/maynuo-m97/api.c +++ b/src/hardware/maynuo-m97/api.c @@ -53,9 +53,11 @@ static const uint32_t devopts_cg[] = { SR_CONF_OVER_TEMPERATURE_PROTECTION_ACTIVE | SR_CONF_GET, }; -/* The IDs in this list are only guessed and needs to be verified - against some real hardware. If at least a few of them matches, - it will probably be safe to enable the others. */ +/* + * The IDs in this list are only guessed and needs to be verified + * against some real hardware. If at least a few of them matches, + * it will probably be safe to enable the others. + */ static const struct maynuo_m97_model supported_models[] = { // { 53, "M9711" , 30, 150, 150 }, // { 54, "M9712" , 30, 150, 300 }, @@ -170,12 +172,12 @@ static int config_compare(gconstpointer a, gconstpointer b) static GSList *scan(struct sr_dev_driver *di, GSList *options) { struct sr_config default_serialcomm = { - .key = SR_CONF_SERIALCOMM, - .data = g_variant_new_string("9600/8n1"), + .key = SR_CONF_SERIALCOMM, + .data = g_variant_new_string("9600/8n1"), }; struct sr_config default_modbusaddr = { - .key = SR_CONF_MODBUSADDR, - .data = g_variant_new_uint64(1), + .key = SR_CONF_MODBUSADDR, + .data = g_variant_new_uint64(1), }; GSList *opts = options, *devices; @@ -224,8 +226,7 @@ static int dev_close(struct sr_dev_inst *sdi) /* Wait for the last data that was requested from the device. */ uint16_t registers[devc->expecting_registers]; sr_modbus_read_holding_registers(modbus, -1, - devc->expecting_registers, - registers); + devc->expecting_registers, registers); } maynuo_m97_set_bit(modbus, PC1, 0); diff --git a/src/hardware/maynuo-m97/protocol.c b/src/hardware/maynuo-m97/protocol.c index 05c3ae68..04fa2948 100644 --- a/src/hardware/maynuo-m97/protocol.c +++ b/src/hardware/maynuo-m97/protocol.c @@ -95,8 +95,8 @@ SR_PRIV int maynuo_m97_get_model_version(struct sr_modbus_dev_inst *modbus, uint16_t registers[2]; int ret; ret = sr_modbus_read_holding_registers(modbus, MODEL, 2, registers); - *model = RB16(registers+0); - *version = RB16(registers+1); + *model = RB16(registers + 0); + *version = RB16(registers + 1); return ret; } diff --git a/src/hardware/motech-lps-30x/api.c b/src/hardware/motech-lps-30x/api.c index 1fe0d86c..de707f2d 100644 --- a/src/hardware/motech-lps-30x/api.c +++ b/src/hardware/motech-lps-30x/api.c @@ -18,9 +18,12 @@ * along with this program. If not, see . */ -/** @file - * Motech LPS-30x series power supply driver - * @internal +/** + * @file + * + * Motech LPS-30x series power supply driver + * + * @internal */ #include @@ -173,7 +176,7 @@ SR_PRIV int lps_cmd_ok(struct sr_serial_dev_inst *serial, const char *fmt, ...) va_list args; char buf[LINELEN_MAX]; char *bufptr; - int buflen; + int buflen; /* Send command */ va_start(args, fmt); @@ -194,8 +197,9 @@ SR_PRIV int lps_cmd_ok(struct sr_serial_dev_inst *serial, const char *fmt, ...) return SR_ERR; } -/** Send command and read reply string. - * @param reply Pointer to buffer of size LINELEN_MAX. Will be NUL-terminated. +/** + * Send command and read reply string. + * @param reply Pointer to buffer of size LINELEN_MAX. Will be NUL-terminated. */ SR_PRIV int lps_cmd_reply(char *reply, struct sr_serial_dev_inst *serial, const char *fmt, ...) { @@ -203,7 +207,7 @@ SR_PRIV int lps_cmd_reply(char *reply, struct sr_serial_dev_inst *serial, const va_list args; char buf[LINELEN_MAX]; char *bufptr; - int buflen; + int buflen; reply[0] = '\0'; @@ -307,9 +311,11 @@ static gint64 calc_timeout_ms(gint64 start_us) return result; } -/** Read message into buf until "OK" received. - * @retval SR_OK Msg received; buf and buflen contain result, if any except OK. - * @retval SR_ERR Error, including timeout. +/** + * Read message into buf until "OK" received. + * + * @retval SR_OK Msg received; buf and buflen contain result, if any except OK. + * @retval SR_ERR Error, including timeout. */ SR_PRIV int lps_read_reply(struct sr_serial_dev_inst *serial, char **buf, int *buflen) { @@ -431,7 +437,7 @@ static GSList *do_scan(lps_modelid modelid, struct sr_dev_driver *drv, GSList *o g_strstrip(buf); verstr = buf + 4; } - else /* Bug in device FW 1.17: Querying version string fails while output is active. + else /* Bug in device FW 1.17: Querying version string fails while output is active. Therefore just print an error message, but do not exit with error. */ sr_err("Failed to query for hardware version: %s.", sr_strerror(ret)); @@ -725,10 +731,10 @@ static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst * case SR_CONF_DEVICE_OPTIONS: if ((ch_idx == 0) || (ch_idx == 1)) /* CH1, CH2 */ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, - devopts_ch12, ARRAY_SIZE(devopts_ch12), sizeof(uint32_t)); + devopts_ch12, ARRAY_SIZE(devopts_ch12), sizeof(uint32_t)); else /* Must be CH3 */ *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, - devopts_ch3, ARRAY_SIZE(devopts_ch3), sizeof(uint32_t)); + devopts_ch3, ARRAY_SIZE(devopts_ch3), sizeof(uint32_t)); break; case SR_CONF_VOLTAGE_TARGET: g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY); diff --git a/src/hardware/motech-lps-30x/protocol.c b/src/hardware/motech-lps-30x/protocol.c index 0681eed6..4de6f0e9 100644 --- a/src/hardware/motech-lps-30x/protocol.c +++ b/src/hardware/motech-lps-30x/protocol.c @@ -18,9 +18,12 @@ * along with this program. If not, see . */ -/** @file - * Motech LPS-30x series power supply driver - * @internal +/** + * @file + * + * Motech LPS-30x series power supply driver + * + * @internal */ #include diff --git a/src/hardware/motech-lps-30x/protocol.h b/src/hardware/motech-lps-30x/protocol.h index 71458728..cb74148f 100644 --- a/src/hardware/motech-lps-30x/protocol.h +++ b/src/hardware/motech-lps-30x/protocol.h @@ -18,9 +18,12 @@ * along with this program. If not, see . */ -/** @file - * Motech LPS-30x series power supply driver - * @internal +/** + * @file + * + * Motech LPS-30x series power supply driver + * + * @internal */ #ifndef LIBSIGROK_HARDWARE_MOTECH_LPS_30X_PROTOCOL_H diff --git a/src/hardware/norma-dmm/protocol.c b/src/hardware/norma-dmm/protocol.c index 96a47379..de31828a 100644 --- a/src/hardware/norma-dmm/protocol.c +++ b/src/hardware/norma-dmm/protocol.c @@ -17,9 +17,12 @@ * along with this program. If not, see . */ -/** @file - * Norma DM9x0/Siemens B102x DMMs driver. - * @internal +/** + * @file + * + * Norma DM9x0/Siemens B102x DMMs driver. + * + * @internal */ #include @@ -350,13 +353,13 @@ static void nma_process_line(const struct sr_dev_inst *sdi) /* 4: Flags. Evaluating this after setting value! */ flags = xgittoint(devc->buf[4]); if (flags & 0x04) /* Invalid value */ - value = NAN; + value = NAN; else if (flags & 0x01) /* Overload */ - value = INFINITY; + value = INFINITY; if (flags & 0x02) { /* Duplicate value, has been sent before. */ - sr_spew("Duplicate value, dismissing!"); - devc->buflen = 0; - return; + sr_spew("Duplicate value, dismissing!"); + devc->buflen = 0; + return; } sr_spew("range=%d/scale=%f/value=%f", range, diff --git a/src/hardware/norma-dmm/protocol.h b/src/hardware/norma-dmm/protocol.h index 7ce7911f..bec61070 100644 --- a/src/hardware/norma-dmm/protocol.h +++ b/src/hardware/norma-dmm/protocol.h @@ -28,14 +28,17 @@ #include #include "libsigrok-internal.h" -/** @file - * Norma DM9x0/Siemens B102x DMMs driver. - * @internal +/** + * @file + * + * Norma DM9x0/Siemens B102x DMMs driver. + * + * @internal */ #define LOG_PREFIX "norma-dmm" -#define NMADMM_BUFSIZE 256 +#define NMADMM_BUFSIZE 256 #define NMADMM_TIMEOUT_MS 2000 /**< Request timeout. */ diff --git a/src/hardware/rigol-ds/protocol.c b/src/hardware/rigol-ds/protocol.c index df72307d..77af43e9 100644 --- a/src/hardware/rigol-ds/protocol.c +++ b/src/hardware/rigol-ds/protocol.c @@ -221,7 +221,7 @@ static int rigol_ds_check_stop(const struct sr_dev_inst *sdi) return SR_OK; if (rigol_ds_config_set(sdi, ":WAV:SOUR CHAN%d", - ch->index + 1) != SR_OK) + ch->index + 1) != SR_OK) return SR_ERR; /* Check that the number of samples will be accepted */ if (rigol_ds_config_set(sdi, ":WAV:POIN %d", devc->analog_frame_size) != SR_OK) @@ -432,7 +432,7 @@ SR_PRIV int rigol_ds_channel_start(const struct sr_dev_inst *sdi) break; case PROTOCOL_V3: if (rigol_ds_config_set(sdi, ":WAV:SOUR CHAN%d", - ch->index + 1) != SR_OK) + ch->index + 1) != SR_OK) return SR_ERR; if (devc->data_source != DATA_SOURCE_LIVE) { if (rigol_ds_config_set(sdi, ":WAV:RES") != SR_OK) diff --git a/src/hardware/saleae-logic16/api.c b/src/hardware/saleae-logic16/api.c index 3597d3f1..e6b752d1 100644 --- a/src/hardware/saleae-logic16/api.c +++ b/src/hardware/saleae-logic16/api.c @@ -195,7 +195,7 @@ static GSList *scan(struct sr_dev_driver *di, GSList *options) for (j = 0; j < ARRAY_SIZE(channel_names); j++) sr_channel_new(sdi, j, SR_CHANNEL_LOGIC, TRUE, - channel_names[j]); + channel_names[j]); devc = g_malloc0(sizeof(struct dev_context)); devc->selected_voltage_range = VOLTAGE_RANGE_18_33_V; diff --git a/src/hardware/scpi-pps/api.c b/src/hardware/scpi-pps/api.c index 5bce3af0..57bdcb81 100644 --- a/src/hardware/scpi-pps/api.c +++ b/src/hardware/scpi-pps/api.c @@ -43,9 +43,8 @@ static const struct pps_channel_instance pci[] = { }; static struct sr_dev_inst *probe_device(struct sr_scpi_dev_inst *scpi, - int (*get_hw_id)(struct sr_scpi_dev_inst *scpi, - struct sr_scpi_hw_info **scpi_response) - ) + int (*get_hw_id)(struct sr_scpi_dev_inst *scpi, + struct sr_scpi_hw_info **scpi_response)) { struct dev_context *devc; struct sr_dev_inst *sdi; diff --git a/src/hardware/scpi-pps/profiles.c b/src/hardware/scpi-pps/profiles.c index 7cd2e2b7..f2cbf737 100644 --- a/src/hardware/scpi-pps/profiles.c +++ b/src/hardware/scpi-pps/profiles.c @@ -481,7 +481,7 @@ static int philips_pm2800_probe_channels(struct sr_dev_inst *sdi, sr_dbg("output %d: %.0f - %.0fV, %.0f - %.0fA, %.0f - %.0fW", i + 1, spec->voltage[0], spec->voltage[1], spec->current[0], spec->current[1], - spec->power[0] , spec->power[1]); + spec->power[0], spec->power[1]); (*channels)[i].name = (char *)philips_pm2800_names[i]; memcpy(&((*channels)[i].voltage), spec, sizeof(float) * 15); (*channel_groups)[i].name = (char *)philips_pm2800_names[i]; diff --git a/src/hardware/serial-dmm/protocol.h b/src/hardware/serial-dmm/protocol.h index f8ecbb42..97493456 100644 --- a/src/hardware/serial-dmm/protocol.h +++ b/src/hardware/serial-dmm/protocol.h @@ -35,11 +35,15 @@ struct dmm_info { uint32_t baudrate; /** Packet size in bytes. */ int packet_size; - /** Request timeout [ms] before request is considered lost and a new - * one is sent. Used only if device needs polling. */ + /** + * Request timeout [ms] before request is considered lost and a new + * one is sent. Used only if device needs polling. + */ int64_t req_timeout_ms; - /** Delay between reception of packet and next request. Some DMMs - * need this. Used only if device needs polling. */ + /** + * Delay between reception of packet and next request. Some DMMs + * need this. Used only if device needs polling. + */ int64_t req_delay_ms; /** Packet request function. */ int (*packet_request)(struct sr_serial_dev_inst *); @@ -64,8 +68,10 @@ struct dev_context { int bufoffset; int buflen; - /** The timestamp [µs] to send the next request. - * Used only if device needs polling. */ + /** + * The timestamp [µs] to send the next request. + * Used only if device needs polling. + */ int64_t req_next_at; }; diff --git a/src/hardware/sysclk-lwla/lwla1016.c b/src/hardware/sysclk-lwla/lwla1016.c index b280b7a2..d16a35e7 100644 --- a/src/hardware/sysclk-lwla/lwla1016.c +++ b/src/hardware/sysclk-lwla/lwla1016.c @@ -121,7 +121,7 @@ static void read_response(struct acquisition_state *acq) * alignment is guaranteed. */ out_p = (uint32_t *)&acq->out_packet[acq->out_index * UNIT_SIZE]; - in_p = &acq->xfer_buf_in[acq->in_index]; + in_p = &acq->xfer_buf_in[acq->in_index]; /* * Transfer two samples at a time, taking care to swap the 16-bit * halves of each input word but keeping the samples themselves in @@ -201,7 +201,7 @@ static int test_read_memory(const struct sr_dev_inst *sdi, unsigned char reply[512]; devc = sdi->priv; - usb = sdi->conn; + usb = sdi->conn; command[0] = LWLA_WORD(CMD_READ_MEM32); command[1] = LWLA_WORD_0(start); @@ -317,7 +317,7 @@ static int setup_acquisition(const struct sr_dev_inst *sdi) int ret; devc = sdi->priv; - usb = sdi->conn; + usb = sdi->conn; ret = lwla_write_reg(usb, REG_CHAN_MASK, devc->channel_mask); if (ret != SR_OK) @@ -349,7 +349,7 @@ static int prepare_request(const struct sr_dev_inst *sdi) unsigned int chunk_len, count; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; acq->xfer_out->length = 0; acq->reg_seq_pos = 0; @@ -409,7 +409,7 @@ static int handle_response(const struct sr_dev_inst *sdi) int expect_len; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; switch (devc->state) { case STATE_STATUS_REQUEST: diff --git a/src/hardware/sysclk-lwla/lwla1034.c b/src/hardware/sysclk-lwla/lwla1034.c index 14692c38..a4bda368 100644 --- a/src/hardware/sysclk-lwla/lwla1034.c +++ b/src/hardware/sysclk-lwla/lwla1034.c @@ -284,7 +284,7 @@ static int detect_short_transfer_quirk(const struct sr_dev_inst *sdi) const int lreg_count = 10; devc = sdi->priv; - usb = sdi->conn; + usb = sdi->conn; command[0] = LWLA_WORD(CMD_READ_LREGS); command[1] = LWLA_WORD(0); @@ -389,8 +389,8 @@ static int setup_acquisition(const struct sr_dev_inst *sdi) int ret; devc = sdi->priv; - usb = sdi->conn; - acq = devc->acquisition; + usb = sdi->conn; + acq = devc->acquisition; ret = lwla_write_regs(usb, capture_init, ARRAY_SIZE(capture_init)); if (ret != SR_OK) @@ -414,7 +414,7 @@ static int setup_acquisition(const struct sr_dev_inst *sdi) bulk_long_set(acq, LREG_DIV_COUNT, divider_count); bulk_long_set(acq, LREG_TRG_VALUE, devc->trigger_values); - bulk_long_set(acq, LREG_TRG_TYPE, devc->trigger_edge_mask); + bulk_long_set(acq, LREG_TRG_TYPE, devc->trigger_edge_mask); trigger_mask = devc->trigger_mask; @@ -517,7 +517,7 @@ static int handle_response(const struct sr_dev_inst *sdi) int expect_len; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; switch (devc->state) { case STATE_STATUS_REQUEST: @@ -527,7 +527,7 @@ static int handle_response(const struct sr_dev_inst *sdi) return SR_ERR; } acq->mem_addr_fill = bulk_long_get(acq, LREG_MEM_FILL) & 0xFFFFFFFF; - acq->duration_now = bulk_long_get(acq, LREG_DURATION); + acq->duration_now = bulk_long_get(acq, LREG_DURATION); /* Shift left by one so the bit positions match the LWLA1016. */ acq->status = (bulk_long_get(acq, LREG_STATUS) & 0x3F) << 1; /* diff --git a/src/hardware/sysclk-lwla/protocol.c b/src/hardware/sysclk-lwla/protocol.c index 986aa612..85997249 100644 --- a/src/hardware/sysclk-lwla/protocol.c +++ b/src/hardware/sysclk-lwla/protocol.c @@ -97,7 +97,7 @@ static int submit_request(const struct sr_dev_inst *sdi, int ret; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; devc->state = state; @@ -132,7 +132,7 @@ static void handle_status_response(const struct sr_dev_inst *sdi) unsigned int old_status; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; old_status = acq->status; if ((*devc->model->handle_response)(sdi) != SR_OK) { @@ -168,7 +168,7 @@ static void handle_length_response(const struct sr_dev_inst *sdi) struct acquisition_state *acq; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; if ((*devc->model->handle_response)(sdi) != SR_OK) { devc->transfer_error = TRUE; @@ -202,13 +202,13 @@ static void handle_read_response(const struct sr_dev_inst *sdi) unsigned int end_addr; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; /* Prepare session packet. */ - packet.type = SR_DF_LOGIC; + packet.type = SR_DF_LOGIC; packet.payload = &logic; logic.unitsize = (devc->model->num_channels + 7) / 8; - logic.data = acq->out_packet; + logic.data = acq->out_packet; end_addr = MIN(acq->mem_addr_next, acq->mem_addr_stop); acq->in_index = 0; @@ -258,7 +258,7 @@ static void clear_acquisition_state(const struct sr_dev_inst *sdi) struct acquisition_state *acq; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; devc->acquisition = NULL; @@ -281,7 +281,7 @@ static int transfer_event(int fd, int revents, void *cb_data) (void)fd; - sdi = cb_data; + sdi = cb_data; devc = sdi->priv; drvc = sdi->driver->context; @@ -289,7 +289,7 @@ static int transfer_event(int fd, int revents, void *cb_data) return G_SOURCE_REMOVE; /* Handle pending USB events without blocking. */ - tv.tv_sec = 0; + tv.tv_sec = 0; tv.tv_usec = 0; ret = libusb_handle_events_timeout_completed(drvc->sr_ctx->libusb_ctx, &tv, NULL); @@ -329,9 +329,9 @@ static void LIBUSB_CALL transfer_out_completed(struct libusb_transfer *transfer) struct dev_context *devc; struct acquisition_state *acq; - sdi = transfer->user_data; + sdi = transfer->user_data; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; if (transfer->status != LIBUSB_TRANSFER_COMPLETED) { sr_err("Transfer to device failed (state %d): %s.", @@ -394,9 +394,9 @@ static void LIBUSB_CALL transfer_in_completed(struct libusb_transfer *transfer) struct dev_context *devc; struct acquisition_state *acq; - sdi = transfer->user_data; + sdi = transfer->user_data; devc = sdi->priv; - acq = devc->acquisition; + acq = devc->acquisition; if (transfer->status != LIBUSB_TRANSFER_COMPLETED) { sr_err("Transfer from device failed (state %d): %s.", @@ -457,7 +457,7 @@ static int init_acquisition_state(const struct sr_dev_inst *sdi) struct acquisition_state *acq; devc = sdi->priv; - usb = sdi->conn; + usb = sdi->conn; if (devc->acquisition) { sr_err("Acquisition still in progress?"); diff --git a/src/hardware/teleinfo/protocol.h b/src/hardware/teleinfo/protocol.h index 3f896523..f450547e 100644 --- a/src/hardware/teleinfo/protocol.h +++ b/src/hardware/teleinfo/protocol.h @@ -43,7 +43,7 @@ struct dev_context { struct sr_sw_limits sw_limits; /* Operational state */ - enum optarif optarif; /**< The device mode (which measures are reported) */ + enum optarif optarif; /**< The device mode (which measures are reported) */ /* Temporary state across callbacks */ uint8_t buf[TELEINFO_BUF_SIZE]; diff --git a/src/hardware/testo/api.c b/src/hardware/testo/api.c index 2f44eaad..90f589d7 100644 --- a/src/hardware/testo/api.c +++ b/src/hardware/testo/api.c @@ -174,7 +174,7 @@ static int dev_close(struct sr_dev_inst *sdi) usb = sdi->conn; if (!usb->devhdl) - /* Nothing to do. */ + /* Nothing to do. */ return SR_OK; libusb_release_interface(usb->devhdl, 0); diff --git a/src/hardware/tondaj-sl-814/protocol.c b/src/hardware/tondaj-sl-814/protocol.c index cf885191..063544e8 100644 --- a/src/hardware/tondaj-sl-814/protocol.c +++ b/src/hardware/tondaj-sl-814/protocol.c @@ -175,7 +175,7 @@ SR_PRIV int tondaj_sl_814_receive_data(int fd, int revents, void *cb_data) } else if (devc->state == GET_PACKET) { /* Read a packet from the device. */ ret = serial_read_nonblocking(serial, devc->buf + devc->buflen, - 4 - devc->buflen); + 4 - devc->buflen); if (ret < 0) { sr_err("Error reading packet: %d.", ret); return TRUE; diff --git a/src/hardware/uni-t-dmm/api.c b/src/hardware/uni-t-dmm/api.c index 2dab1be4..6176a460 100644 --- a/src/hardware/uni-t-dmm/api.c +++ b/src/hardware/uni-t-dmm/api.c @@ -165,7 +165,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) std_session_send_df_header(sdi); sr_session_source_add(sdi->session, -1, 0, 10 /* poll_timeout */, - uni_t_dmm_receive_data, (void *)sdi); + uni_t_dmm_receive_data, (void *)sdi); return SR_OK; } @@ -181,7 +181,7 @@ static int dev_acquisition_stop(struct sr_dev_inst *sdi) #define DMM(ID, CHIPSET, VENDOR, MODEL, BAUDRATE, PACKETSIZE, \ VALID, PARSE, DETAILS) \ - &((struct dmm_info) { \ + &((struct dmm_info) { \ { \ .name = ID, \ .longname = VENDOR " " MODEL, \ diff --git a/src/hardware/uni-t-ut32x/api.c b/src/hardware/uni-t-ut32x/api.c index 8e84c2c1..da53be9e 100644 --- a/src/hardware/uni-t-ut32x/api.c +++ b/src/hardware/uni-t-ut32x/api.c @@ -134,7 +134,7 @@ static int dev_close(struct sr_dev_inst *sdi) usb = sdi->conn; if (!usb->devhdl) - /* Nothing to do. */ + /* Nothing to do. */ return SR_OK; libusb_release_interface(usb->devhdl, USB_INTERFACE); diff --git a/src/hardware/uni-t-ut32x/protocol.h b/src/hardware/uni-t-ut32x/protocol.h index a2bad330..969ccfa6 100644 --- a/src/hardware/uni-t-ut32x/protocol.h +++ b/src/hardware/uni-t-ut32x/protocol.h @@ -38,7 +38,7 @@ #define EP_OUT 2 enum { - DATA_SOURCE_LIVE, + DATA_SOURCE_LIVE, DATA_SOURCE_MEMORY, }; diff --git a/src/hardware/victor-dmm/api.c b/src/hardware/victor-dmm/api.c index b5502043..ff0302d9 100644 --- a/src/hardware/victor-dmm/api.c +++ b/src/hardware/victor-dmm/api.c @@ -31,6 +31,7 @@ #define VICTOR_VENDOR "Victor" #define VICTOR_INTERFACE 0 #define VICTOR_ENDPOINT (LIBUSB_ENDPOINT_IN | 1) + static int dev_acquisition_stop(struct sr_dev_inst *sdi); static const uint32_t drvopts[] = { @@ -133,7 +134,7 @@ static int dev_close(struct sr_dev_inst *sdi) usb = sdi->conn; if (!usb->devhdl) - /* Nothing to do. */ + /* Nothing to do. */ return SR_OK; libusb_release_interface(usb->devhdl, VICTOR_INTERFACE); diff --git a/src/hardware/yokogawa-dlm/protocol.c b/src/hardware/yokogawa-dlm/protocol.c index 5c9866e4..bd2f33f0 100644 --- a/src/hardware/yokogawa-dlm/protocol.c +++ b/src/hardware/yokogawa-dlm/protocol.c @@ -207,8 +207,8 @@ static const struct scope_config scope_models[] = { .num_ydivs = 8, }, { - .model_id = {"710110", "710120", "710130", NULL}, - .model_name = {"DLM2024", "DLM2034", "DLM2054", NULL}, + .model_id = {"710110", "710120", "710130", NULL}, + .model_name = {"DLM2024", "DLM2034", "DLM2054", NULL}, .analog_channels = 4, .digital_channels = 8, .pods = 1, @@ -224,9 +224,9 @@ static const struct scope_config scope_models[] = { }, { .model_id = {"701307", "701308", "701310", "701311", - "701312", "701313", NULL}, + "701312", "701313", NULL}, .model_name = {"DL9040", "DL9040L", "DL9140", "DL9140L", - "DL9240", "DL9240L", NULL}, + "DL9240", "DL9240L", NULL}, .analog_channels = 4, .digital_channels = 0, .pods = 0, diff --git a/src/hardware/zeroplus-logic-cube/analyzer.c b/src/hardware/zeroplus-logic-cube/analyzer.c index aa5643ab..321b17c0 100644 --- a/src/hardware/zeroplus-logic-cube/analyzer.c +++ b/src/hardware/zeroplus-logic-cube/analyzer.c @@ -420,7 +420,7 @@ SR_PRIV void analyzer_read_start(libusb_device_handle *devh) } SR_PRIV int analyzer_read_data(libusb_device_handle *devh, void *buffer, - unsigned int size) + unsigned int size) { return gl_read_bulk(devh, buffer, size); } @@ -555,7 +555,7 @@ SR_PRIV void analyzer_add_filter(int channel, int type) } g_filter_status[i] |= - 1 << ((2 * channel) + (type == FILTER_LOW ? 1 : 0)); + 1 << ((2 * channel) + (type == FILTER_LOW ? 1 : 0)); g_filter_enable = 1; } diff --git a/src/hardware/zeroplus-logic-cube/analyzer.h b/src/hardware/zeroplus-logic-cube/analyzer.h index 41a1eed8..29f2c292 100644 --- a/src/hardware/zeroplus-logic-cube/analyzer.h +++ b/src/hardware/zeroplus-logic-cube/analyzer.h @@ -77,7 +77,7 @@ SR_PRIV void analyzer_set_freq(int freq, int scale); SR_PRIV void analyzer_set_ramsize_trigger_address(unsigned int address); SR_PRIV void analyzer_set_triggerbar_address(unsigned int address); -SR_PRIV unsigned int analyzer_get_ramsize_trigger_address(void ); +SR_PRIV unsigned int analyzer_get_ramsize_trigger_address(void ); SR_PRIV unsigned int analyzer_get_triggerbar_address(void); SR_PRIV void analyzer_set_compression(unsigned int type); SR_PRIV void analyzer_set_memory_size(unsigned int size); @@ -99,7 +99,7 @@ SR_PRIV void analyzer_initialize(libusb_device_handle *devh); SR_PRIV void analyzer_wait(libusb_device_handle *devh, int set, int unset); SR_PRIV void analyzer_read_start(libusb_device_handle *devh); SR_PRIV int analyzer_read_data(libusb_device_handle *devh, void *buffer, - unsigned int size); + unsigned int size); SR_PRIV void analyzer_read_stop(libusb_device_handle *devh); SR_PRIV void analyzer_start(libusb_device_handle *devh); SR_PRIV void analyzer_configure(libusb_device_handle *devh); diff --git a/src/hardware/zeroplus-logic-cube/api.c b/src/hardware/zeroplus-logic-cube/api.c index dc9f2dea..3d0c3a41 100644 --- a/src/hardware/zeroplus-logic-cube/api.c +++ b/src/hardware/zeroplus-logic-cube/api.c @@ -413,10 +413,10 @@ static int config_list(uint32_t key, GVariant **data, const struct sr_dev_inst * case SR_CONF_DEVICE_OPTIONS: if (!sdi) { *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, - drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); + drvopts, ARRAY_SIZE(drvopts), sizeof(uint32_t)); } else { *data = g_variant_new_fixed_array(G_VARIANT_TYPE_UINT32, - devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); + devopts, ARRAY_SIZE(devopts), sizeof(uint32_t)); } break; case SR_CONF_SAMPLERATE: diff --git a/src/hardware/zeroplus-logic-cube/gl_usb.c b/src/hardware/zeroplus-logic-cube/gl_usb.c index 0d662f65..9899473f 100644 --- a/src/hardware/zeroplus-logic-cube/gl_usb.c +++ b/src/hardware/zeroplus-logic-cube/gl_usb.c @@ -92,9 +92,10 @@ static int gl_read_data(libusb_device_handle *devh) SR_PRIV int gl_read_bulk(libusb_device_handle *devh, void *buffer, unsigned int size) { - unsigned char packet[8] = - { 0, 0, 0, 0, size & 0xff, (size & 0xff00) >> 8, - (size & 0xff0000) >> 16, (size & 0xff000000) >> 24 }; + unsigned char packet[8] = { + 0, 0, 0, 0, size & 0xff, (size & 0xff00) >> 8, + (size & 0xff0000) >> 16, (size & 0xff000000) >> 24 + }; int ret, transferred = 0; ret = libusb_control_transfer(devh, CTRL_OUT, 0x4, REQ_READBULK, diff --git a/src/hwdriver.c b/src/hwdriver.c index c23e761a..ab221010 100644 --- a/src/hwdriver.c +++ b/src/hwdriver.c @@ -553,9 +553,12 @@ SR_PRIV void sr_hw_cleanup_all(const struct sr_context *ctx) } } -/** Allocate struct sr_config. - * A floating reference can be passed in for data. - * @private +/** + * Allocate struct sr_config. + * + * A floating reference can be passed in for data. + * + * @private */ SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data) { @@ -568,8 +571,10 @@ SR_PRIV struct sr_config *sr_config_new(uint32_t key, GVariant *data) return src; } -/** Free struct sr_config. - * @private +/** + * Free struct sr_config. + * + * @private */ SR_PRIV void sr_config_free(struct sr_config *src) { @@ -680,7 +685,7 @@ static int check_key(const struct sr_dev_driver *driver, * Otherwise it must be NULL. If sdi is != NULL, sdi->priv must * also be != NULL. * @param[in] cg The channel group on the device for which to list the - * values, or NULL. + * values, or NULL. * @param[in] key The configuration key (SR_CONF_*). * @param[in,out] data Pointer to a GVariant where the value will be stored. * Must not be NULL. The caller is given ownership of the GVariant @@ -691,8 +696,8 @@ static int check_key(const struct sr_dev_driver *driver, * @retval SR_OK Success. * @retval SR_ERR Error. * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be - * interpreted as an error by the caller; merely as an indication - * that it's not applicable. + * interpreted as an error by the caller; merely as an indication + * that it's not applicable. * * @since 0.3.0 */ @@ -742,8 +747,8 @@ SR_API int sr_config_get(const struct sr_dev_driver *driver, * @retval SR_OK Success. * @retval SR_ERR Error. * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be - * interpreted as an error by the caller; merely as an indication - * that it's not applicable. + * interpreted as an error by the caller; merely as an indication + * that it's not applicable. * * @since 0.3.0 */ @@ -814,8 +819,8 @@ SR_API int sr_config_commit(const struct sr_dev_inst *sdi) * @retval SR_OK Success. * @retval SR_ERR Error. * @retval SR_ERR_ARG The driver doesn't know that key, but this is not to be - * interpreted as an error by the caller; merely as an indication - * that it's not applicable. + * interpreted as an error by the caller; merely as an indication + * that it's not applicable. * * @since 0.3.0 */ diff --git a/src/input/binary.c b/src/input/binary.c index 4984edb0..91e4d3c4 100644 --- a/src/input/binary.c +++ b/src/input/binary.c @@ -29,9 +29,9 @@ #define LOG_PREFIX "input/binary" -#define MAX_CHUNK_SIZE 4096 -#define DEFAULT_NUM_CHANNELS 8 -#define DEFAULT_SAMPLERATE 0 +#define MAX_CHUNK_SIZE 4096 +#define DEFAULT_NUM_CHANNELS 8 +#define DEFAULT_SAMPLERATE 0 struct context { gboolean started; diff --git a/src/input/csv.c b/src/input/csv.c index 1eb20bff..8d151fdc 100644 --- a/src/input/csv.c +++ b/src/input/csv.c @@ -89,7 +89,7 @@ struct context { /* Comment prefix character(s). */ GString *comment; - /* Termination character(s) used in current stream. */ + /* Termination character(s) used in current stream. */ char *termination; /* Determines if sample data is stored in multiple columns. */ diff --git a/src/input/raw_analog.c b/src/input/raw_analog.c index 9c7135f0..95b1d669 100644 --- a/src/input/raw_analog.c +++ b/src/input/raw_analog.c @@ -31,9 +31,9 @@ #define LOG_PREFIX "input/raw_analog" /* How many bytes at a time to process and send to the session bus. */ -#define CHUNK_SIZE 4096 -#define DEFAULT_NUM_CHANNELS 1 -#define DEFAULT_SAMPLERATE 0 +#define CHUNK_SIZE 4096 +#define DEFAULT_NUM_CHANNELS 1 +#define DEFAULT_SAMPLERATE 0 struct context { gboolean started; diff --git a/src/input/trace32_ad.c b/src/input/trace32_ad.c index a9b1ca4f..8cbd4d07 100644 --- a/src/input/trace32_ad.c +++ b/src/input/trace32_ad.c @@ -50,7 +50,7 @@ #define MAX_POD_COUNT 12 #define HEADER_SIZE 80 -#define TIMESTAMP_RESOLUTION ((double)0.000000000078125) /* 0.078125 ns */ +#define TIMESTAMP_RESOLUTION ((double)0.000000000078125) /* 0.078125 ns */ /* * The resolution equals a sampling freq of 12.8 GHz. That's a bit high @@ -79,7 +79,7 @@ enum { enum { AD_COMPR_NONE = 0, /* File created with /NOCOMPRESS */ - AD_COMPR_QCOMP = 6 /* File created with /COMPRESS or /QUICKCOMPRESS */ + AD_COMPR_QCOMP = 6, /* File created with /COMPRESS or /QUICKCOMPRESS */ }; struct context { @@ -253,8 +253,8 @@ static int process_header(GString *buf, struct context *inc) inc->device = device_id; inc->trigger_timestamp = RL64(buf->str + 32); - inc->compression = R8(buf->str + 48); /* Maps to the enum. */ - inc->record_mode = R8(buf->str + 55); /* Maps to the enum. */ + inc->compression = R8(buf->str + 48); /* Maps to the enum. */ + inc->record_mode = R8(buf->str + 55); /* Maps to the enum. */ inc->record_size = record_size; inc->record_count = RL32(buf->str + 60); inc->last_record = RL32S(buf->str + 64); diff --git a/src/input/vcd.c b/src/input/vcd.c index 3b8aba82..1f200330 100644 --- a/src/input/vcd.c +++ b/src/input/vcd.c @@ -93,7 +93,7 @@ struct vcd_channel { /* * Reads a single VCD section from input file and parses it to name/contents. - * e.g. $timescale 1ps $end => "timescale" "1ps" + * e.g. $timescale 1ps $end => "timescale" "1ps" */ static gboolean parse_section(GString *buf, gchar **name, gchar **contents) { diff --git a/src/input/wav.c b/src/input/wav.c index 4f5744a7..243fd4ca 100644 --- a/src/input/wav.c +++ b/src/input/wav.c @@ -31,7 +31,7 @@ #define LOG_PREFIX "input/wav" /* How many bytes at a time to process and send to the session bus. */ -#define CHUNK_SIZE 4096 +#define CHUNK_SIZE 4096 /* Minimum size of header + 1 8-bit mono PCM sample. */ #define MIN_DATA_CHUNK_OFFSET 45 diff --git a/src/lcr/es51919.c b/src/lcr/es51919.c index cd901366..9412ff46 100644 --- a/src/lcr/es51919.c +++ b/src/lcr/es51919.c @@ -490,21 +490,21 @@ static void parse_measurement(const uint8_t *pkt, float *floatval, int unit; int exponent; } units[] = { - { SR_UNIT_UNITLESS, 0 }, /* no unit */ - { SR_UNIT_OHM, 0 }, /* Ohm */ - { SR_UNIT_OHM, 3 }, /* kOhm */ - { SR_UNIT_OHM, 6 }, /* MOhm */ - { -1, 0 }, /* ??? */ - { SR_UNIT_HENRY, -6 }, /* uH */ - { SR_UNIT_HENRY, -3 }, /* mH */ - { SR_UNIT_HENRY, 0 }, /* H */ - { SR_UNIT_HENRY, 3 }, /* kH */ - { SR_UNIT_FARAD, -12 }, /* pF */ - { SR_UNIT_FARAD, -9 }, /* nF */ - { SR_UNIT_FARAD, -6 }, /* uF */ - { SR_UNIT_FARAD, -3 }, /* mF */ - { SR_UNIT_PERCENTAGE, 0 }, /* % */ - { SR_UNIT_DEGREE, 0 }, /* degree */ + { SR_UNIT_UNITLESS, 0 }, /* no unit */ + { SR_UNIT_OHM, 0 }, /* Ohm */ + { SR_UNIT_OHM, 3 }, /* kOhm */ + { SR_UNIT_OHM, 6 }, /* MOhm */ + { -1, 0 }, /* ??? */ + { SR_UNIT_HENRY, -6 }, /* uH */ + { SR_UNIT_HENRY, -3 }, /* mH */ + { SR_UNIT_HENRY, 0 }, /* H */ + { SR_UNIT_HENRY, 3 }, /* kH */ + { SR_UNIT_FARAD, -12 }, /* pF */ + { SR_UNIT_FARAD, -9 }, /* nF */ + { SR_UNIT_FARAD, -6 }, /* uF */ + { SR_UNIT_FARAD, -3 }, /* mF */ + { SR_UNIT_PERCENTAGE, 0 }, /* % */ + { SR_UNIT_DEGREE, 0 }, /* degree */ }; const uint8_t *buf; int digits, exponent; diff --git a/src/libsigrok-internal.h b/src/libsigrok-internal.h index 2e196074..0856c480 100644 --- a/src/libsigrok-internal.h +++ b/src/libsigrok-internal.h @@ -17,9 +17,11 @@ * along with this program. If not, see . */ -/** @file - * @internal - */ +/** + * @file + * + * @internal + */ #ifndef LIBSIGROK_LIBSIGROK_INTERNAL_H #define LIBSIGROK_LIBSIGROK_INTERNAL_H @@ -428,9 +430,9 @@ struct sr_input_module { * @retval SR_OK This module knows the format. * @retval SR_ERR_NA There wasn't enough data for this module to * positively identify the format. - * @retval SR_ERR_DATA This module knows the format, but cannot handle it. - * This means the stream is either corrupt, or indicates a feature - * that the module does not support. + * @retval SR_ERR_DATA This module knows the format, but cannot handle + * it. This means the stream is either corrupt, or indicates a + * feature that the module does not support. * @retval SR_ERR This module does not know the format. */ int (*format_match) (GHashTable *metadata); @@ -468,16 +470,16 @@ struct sr_input_module { */ int (*end) (struct sr_input *in); - /** - * Reset the input module's input handling structures. - * - * Causes the input module to reset its internal state so that we can - * re-send the input data from the beginning without having to - * re-create the entire input module. - * - * @retval SR_OK Success. - * @retval other Negative error code. - */ + /** + * Reset the input module's input handling structures. + * + * Causes the input module to reset its internal state so that we can + * re-send the input data from the beginning without having to + * re-create the entire input module. + * + * @retval SR_OK Success. + * @retval other Negative error code. + */ int (*reset) (struct sr_input *in); /** @@ -495,7 +497,7 @@ struct sr_input_module { /** Output module instance. */ struct sr_output { - /** A pointer to this output's module. */ + /** A pointer to this output's module. */ const struct sr_output_module *module; /** @@ -612,7 +614,7 @@ struct sr_output_module { /** Transform module instance. */ struct sr_transform { - /** A pointer to this transform's module. */ + /** A pointer to this transform's module. */ const struct sr_transform_module *module; /** diff --git a/src/modbus/modbus.c b/src/modbus/modbus.c index bd8c8344..3c660a18 100644 --- a/src/modbus/modbus.c +++ b/src/modbus/modbus.c @@ -29,7 +29,7 @@ SR_PRIV extern const struct sr_modbus_dev_inst modbus_serial_rtu_dev; static const struct sr_modbus_dev_inst *modbus_devs[] = { #ifdef HAVE_LIBSERIALPORT - &modbus_serial_rtu_dev, /* Must be last as it matches any resource. */ + &modbus_serial_rtu_dev, /* Must be last as it matches any resource. */ #endif }; diff --git a/src/output/ascii.c b/src/output/ascii.c index cc67bd9e..ba9acf9d 100644 --- a/src/output/ascii.c +++ b/src/output/ascii.c @@ -182,7 +182,7 @@ static int receive(const struct sr_output *o, const struct sr_datafeed_packet *p /* Flush line buffers. */ g_string_append_len(*out, ctx->lines[j]->str, ctx->lines[j]->len); g_string_append_c(*out, '\n'); - if (j == ctx->num_enabled_channels - 1 && ctx->trigger > -1) { + if (j == ctx->num_enabled_channels - 1 && ctx->trigger > -1) { offset = ctx->trigger + ctx->trigger / 8; g_string_append_printf(*out, "T:%*s^ %d\n", offset, "", ctx->trigger); ctx->trigger = -1; diff --git a/src/output/bits.c b/src/output/bits.c index 71cbd95a..f4868033 100644 --- a/src/output/bits.c +++ b/src/output/bits.c @@ -167,7 +167,7 @@ static int receive(const struct sr_output *o, const struct sr_datafeed_packet *p /* Flush line buffers. */ g_string_append_len(*out, ctx->lines[j]->str, ctx->lines[j]->len); g_string_append_c(*out, '\n'); - if (j == ctx->num_enabled_channels - 1 && ctx->trigger > -1) { + if (j == ctx->num_enabled_channels - 1 && ctx->trigger > -1) { offset = ctx->trigger + ctx->trigger / 8; g_string_append_printf(*out, "T:%*s^ %d\n", offset, "", ctx->trigger); ctx->trigger = -1; diff --git a/src/output/srzip.c b/src/output/srzip.c index b5545585..43dbd16b 100644 --- a/src/output/srzip.c +++ b/src/output/srzip.c @@ -339,7 +339,7 @@ static int zip_append_analog(const struct sr_output *o, if (outc->analog_index_map[index] == channel->index) break; if (outc->analog_index_map[index] == -1) - return SR_ERR_ARG; /* Channel index was not in the list */ + return SR_ERR_ARG; /* Channel index was not in the list */ index += outc->first_analog_index; diff --git a/src/resource.c b/src/resource.c index b921d93d..c87e7be0 100644 --- a/src/resource.c +++ b/src/resource.c @@ -224,15 +224,15 @@ SR_API int sr_resource_set_hooks(struct sr_context *ctx, return SR_ERR_ARG; } if (open_cb && close_cb && read_cb) { - ctx->resource_open_cb = open_cb; + ctx->resource_open_cb = open_cb; ctx->resource_close_cb = close_cb; - ctx->resource_read_cb = read_cb; - ctx->resource_cb_data = cb_data; + ctx->resource_read_cb = read_cb; + ctx->resource_cb_data = cb_data; } else if (!open_cb && !close_cb && !read_cb) { - ctx->resource_open_cb = &resource_open_default; + ctx->resource_open_cb = &resource_open_default; ctx->resource_close_cb = &resource_close_default; - ctx->resource_read_cb = &resource_read_default; - ctx->resource_cb_data = ctx; + ctx->resource_read_cb = &resource_read_default; + ctx->resource_cb_data = ctx; } else { sr_err("%s: inconsistent callback pointers.", __func__); return SR_ERR_ARG; @@ -332,7 +332,7 @@ SR_PRIV gssize sr_resource_read(struct sr_context *ctx, * @param max_size Size limit. Error out if the resource is larger than this. * * @return A buffer containing the resource data, or NULL on failure. Must - * be freed by the caller using g_free(). + * be freed by the caller using g_free(). * * @private */ diff --git a/src/scpi/scpi.c b/src/scpi/scpi.c index e54427ff..e4346e5d 100644 --- a/src/scpi/scpi.c +++ b/src/scpi/scpi.c @@ -90,7 +90,7 @@ static const struct sr_scpi_dev_inst *scpi_devs[] = { &scpi_libgpib_dev, #endif #ifdef HAVE_LIBSERIALPORT - &scpi_serial_dev, /* must be last as it matches any resource */ + &scpi_serial_dev, /* Must be last as it matches any resource. */ #endif }; @@ -446,7 +446,7 @@ SR_PRIV int sr_scpi_get_data(struct sr_scpi_dev_inst *scpi, sr_err("Incompletely read SCPI response."); return SR_ERR; } else if (len > 0) { - laststart = g_get_monotonic_time(); + laststart = g_get_monotonic_time(); } offset += len; g_string_set_size(response, offset); diff --git a/src/scpi/scpi_tcp.c b/src/scpi/scpi_tcp.c index e87f5e78..a4cb6942 100644 --- a/src/scpi/scpi_tcp.c +++ b/src/scpi/scpi_tcp.c @@ -66,8 +66,8 @@ static int scpi_tcp_dev_inst_new(void *priv, struct drv_context *drvc, } tcp->address = g_strdup(params[1]); - tcp->port = g_strdup(params[2]); - tcp->socket = -1; + tcp->port = g_strdup(params[2]); + tcp->socket = -1; return SR_OK; } diff --git a/src/scpi/scpi_usbtmc_libusb.c b/src/scpi/scpi_usbtmc_libusb.c index 6e472750..decafdb6 100644 --- a/src/scpi/scpi_usbtmc_libusb.c +++ b/src/scpi/scpi_usbtmc_libusb.c @@ -48,8 +48,8 @@ struct scpi_usbtmc_libusb { }; /* Some USBTMC-specific enums, as defined in the USBTMC standard. */ -#define SUBCLASS_USBTMC 0x03 -#define USBTMC_USB488 0x01 +#define SUBCLASS_USBTMC 0x03 +#define USBTMC_USB488 0x01 enum { /* USBTMC control requests */ @@ -85,16 +85,16 @@ enum { #define USB488_DEV_CAP_SCPI 0x08 /* Bulk messages constants */ -#define USBTMC_BULK_HEADER_SIZE 12 +#define USBTMC_BULK_HEADER_SIZE 12 /* Bulk MsgID values */ -#define DEV_DEP_MSG_OUT 1 -#define REQUEST_DEV_DEP_MSG_IN 2 -#define DEV_DEP_MSG_IN 2 +#define DEV_DEP_MSG_OUT 1 +#define REQUEST_DEV_DEP_MSG_IN 2 +#define DEV_DEP_MSG_IN 2 /* bmTransferAttributes */ -#define EOM 0x01 -#define TERM_CHAR_ENABLED 0x02 +#define EOM 0x01 +#define TERM_CHAR_ENABLED 0x02 struct usbtmc_blacklist { uint16_t vid; @@ -103,10 +103,10 @@ struct usbtmc_blacklist { /* Devices that publish RL1 support, but don't support it. */ static struct usbtmc_blacklist blacklist_remote[] = { - { 0x1ab1, 0x0588 }, /* Rigol DS1000 series */ - { 0x1ab1, 0x04b0 }, /* Rigol DS2000 series */ - { 0x0957, 0x0588 }, /* Agilent DSO1000 series (rebadged Rigol DS1000) */ - { 0x0b21, 0xffff }, /* All Yokogawa devices */ + { 0x1ab1, 0x0588 }, /* Rigol DS1000 series */ + { 0x1ab1, 0x04b0 }, /* Rigol DS2000 series */ + { 0x0957, 0x0588 }, /* Agilent DSO1000 series (rebadged Rigol DS1000) */ + { 0x0b21, 0xffff }, /* All Yokogawa devices */ ALL_ZERO }; @@ -218,14 +218,9 @@ static int scpi_usbtmc_remote(struct scpi_usbtmc_libusb *uscpi) return SR_OK; sr_dbg("Locking out local control."); - ret = libusb_control_transfer(usb->devhdl, - LIBUSB_ENDPOINT_IN | - LIBUSB_REQUEST_TYPE_CLASS | - LIBUSB_RECIPIENT_INTERFACE, - REN_CONTROL, 1, - uscpi->interface, - &status, 1, - TRANSFER_TIMEOUT); + ret = libusb_control_transfer(usb->devhdl, LIBUSB_ENDPOINT_IN | + LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, + REN_CONTROL, 1, uscpi->interface, &status, 1, TRANSFER_TIMEOUT); if (ret < 0 || status != USBTMC_STATUS_SUCCESS) { if (ret < 0) sr_dbg("Failed to enter REN state: %s.", libusb_error_name(ret)); @@ -234,14 +229,10 @@ static int scpi_usbtmc_remote(struct scpi_usbtmc_libusb *uscpi) return SR_ERR; } - ret = libusb_control_transfer(usb->devhdl, - LIBUSB_ENDPOINT_IN | - LIBUSB_REQUEST_TYPE_CLASS | - LIBUSB_RECIPIENT_INTERFACE, - LOCAL_LOCKOUT, 0, - uscpi->interface, - &status, 1, - TRANSFER_TIMEOUT); + ret = libusb_control_transfer(usb->devhdl, LIBUSB_ENDPOINT_IN | + LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, + LOCAL_LOCKOUT, 0, uscpi->interface, &status, 1, + TRANSFER_TIMEOUT); if (ret < 0 || status != USBTMC_STATUS_SUCCESS) { if (ret < 0) sr_dbg("Failed to enter local lockout state: %s.", @@ -272,14 +263,9 @@ static void scpi_usbtmc_local(struct scpi_usbtmc_libusb *uscpi) return; sr_dbg("Returning local control."); - ret = libusb_control_transfer(usb->devhdl, - LIBUSB_ENDPOINT_IN | - LIBUSB_REQUEST_TYPE_CLASS | - LIBUSB_RECIPIENT_INTERFACE, - GO_TO_LOCAL, 0, - uscpi->interface, - &status, 1, - TRANSFER_TIMEOUT); + ret = libusb_control_transfer(usb->devhdl, LIBUSB_ENDPOINT_IN | + LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, + GO_TO_LOCAL, 0, uscpi->interface, &status, 1, TRANSFER_TIMEOUT); if (ret < 0 || status != USBTMC_STATUS_SUCCESS) { if (ret < 0) sr_dbg("Failed to clear local lockout state: %s.", @@ -323,7 +309,7 @@ static int scpi_usbtmc_libusb_open(struct sr_scpi_dev_inst *scpi) for (intfidx = 0; intfidx < confdes->bNumInterfaces; intfidx++) { intfdes = confdes->interface[intfidx].altsetting; if (intfdes->bInterfaceClass != LIBUSB_CLASS_APPLICATION || - intfdes->bInterfaceSubClass != SUBCLASS_USBTMC || + intfdes->bInterfaceSubClass != SUBCLASS_USBTMC || intfdes->bInterfaceProtocol != USBTMC_USB488) continue; uscpi->interface = intfdes->bInterfaceNumber; @@ -385,29 +371,25 @@ static int scpi_usbtmc_libusb_open(struct sr_scpi_dev_inst *scpi) } /* Get capabilities. */ - ret = libusb_control_transfer(usb->devhdl, - LIBUSB_ENDPOINT_IN | - LIBUSB_REQUEST_TYPE_CLASS | - LIBUSB_RECIPIENT_INTERFACE, - GET_CAPABILITIES, 0, - uscpi->interface, - capabilities, sizeof(capabilities), - TRANSFER_TIMEOUT); + ret = libusb_control_transfer(usb->devhdl, LIBUSB_ENDPOINT_IN | + LIBUSB_REQUEST_TYPE_CLASS | LIBUSB_RECIPIENT_INTERFACE, + GET_CAPABILITIES, 0, uscpi->interface, capabilities, + sizeof(capabilities), TRANSFER_TIMEOUT); if (ret == sizeof(capabilities)) { uscpi->usbtmc_int_cap = capabilities[ 4]; uscpi->usbtmc_dev_cap = capabilities[ 5]; uscpi->usb488_dev_cap = capabilities[15]; } sr_dbg("Device capabilities: %s%s%s%s%s, %s, %s", - uscpi->usb488_dev_cap & USB488_DEV_CAP_SCPI ? "SCPI, " : "", - uscpi->usbtmc_dev_cap & USBTMC_DEV_CAP_TERMCHAR ? "TermChar, ": "", - uscpi->usbtmc_int_cap & USBTMC_INT_CAP_LISTEN_ONLY? "L3, " : - uscpi->usbtmc_int_cap & USBTMC_INT_CAP_TALK_ONLY ? "" : "L4, ", - uscpi->usbtmc_int_cap & USBTMC_INT_CAP_TALK_ONLY ? "T5, " : - uscpi->usbtmc_int_cap & USBTMC_INT_CAP_LISTEN_ONLY? "" : "T6, ", - uscpi->usb488_dev_cap & USB488_DEV_CAP_SR1 ? "SR1" : "SR0", - uscpi->usb488_dev_cap & USB488_DEV_CAP_RL1 ? "RL1" : "RL0", - uscpi->usb488_dev_cap & USB488_DEV_CAP_DT1 ? "DT1" : "DT0"); + uscpi->usb488_dev_cap & USB488_DEV_CAP_SCPI ? "SCPI, " : "", + uscpi->usbtmc_dev_cap & USBTMC_DEV_CAP_TERMCHAR ? "TermChar, ": "", + uscpi->usbtmc_int_cap & USBTMC_INT_CAP_LISTEN_ONLY ? "L3, " : + uscpi->usbtmc_int_cap & USBTMC_INT_CAP_TALK_ONLY ? "" : "L4, ", + uscpi->usbtmc_int_cap & USBTMC_INT_CAP_TALK_ONLY ? "T5, " : + uscpi->usbtmc_int_cap & USBTMC_INT_CAP_LISTEN_ONLY ? "" : "T6, ", + uscpi->usb488_dev_cap & USB488_DEV_CAP_SR1 ? "SR1" : "SR0", + uscpi->usb488_dev_cap & USB488_DEV_CAP_RL1 ? "RL1" : "RL0", + uscpi->usb488_dev_cap & USB488_DEV_CAP_DT1 ? "DT1" : "DT0"); scpi_usbtmc_remote(uscpi); @@ -436,14 +418,14 @@ static void usbtmc_bulk_out_header_write(void *header, uint8_t MsgID, uint8_t bmTransferAttributes, char TermChar) { - W8(header+ 0, MsgID); - W8(header+ 1, bTag); - W8(header+ 2, ~bTag); - W8(header+ 3, 0); - WL32(header+ 4, TransferSize); - W8(header+ 8, bmTransferAttributes); - W8(header+ 9, TermChar); - WL16(header+10, 0); + W8(header + 0, MsgID); + W8(header + 1, bTag); + W8(header + 2, ~bTag); + W8(header + 3, 0); + WL32(header + 4, TransferSize); + W8(header + 8, bmTransferAttributes); + W8(header + 9, TermChar); + WL16(header + 10, 0); } static int usbtmc_bulk_in_header_read(void *header, uint8_t MsgID, @@ -451,14 +433,15 @@ static int usbtmc_bulk_in_header_read(void *header, uint8_t MsgID, int32_t *TransferSize, uint8_t *bmTransferAttributes) { - if (R8(header+0) != MsgID || - R8(header+1) != bTag || - R8(header+2) != (unsigned char)~bTag) + if (R8(header + 0) != MsgID || + R8(header + 1) != bTag || + R8(header + 2) != (unsigned char)~bTag) return SR_ERR; if (TransferSize) - *TransferSize = RL32(header+4); + *TransferSize = RL32(header + 4); if (bmTransferAttributes) - *bmTransferAttributes = R8(header+8); + *bmTransferAttributes = R8(header + 8); + return SR_OK; } @@ -469,23 +452,23 @@ static int scpi_usbtmc_bulkout(struct scpi_usbtmc_libusb *uscpi, struct sr_usb_dev_inst *usb = uscpi->usb; int padded_size, ret, transferred; - if (data && size+USBTMC_BULK_HEADER_SIZE+3 > (int)sizeof(uscpi->buffer)) { + if (data && (size + USBTMC_BULK_HEADER_SIZE + 3) > (int)sizeof(uscpi->buffer)) { sr_err("USBTMC bulk out transfer is too big."); return SR_ERR; } uscpi->bTag++; - uscpi->bTag += !uscpi->bTag; /* bTag == 0 is invalid so avoid it. */ + uscpi->bTag += !uscpi->bTag; /* bTag == 0 is invalid so avoid it. */ usbtmc_bulk_out_header_write(uscpi->buffer, msg_id, uscpi->bTag, size, transfer_attributes, 0); if (data) - memcpy(uscpi->buffer+USBTMC_BULK_HEADER_SIZE, data, size); + memcpy(uscpi->buffer + USBTMC_BULK_HEADER_SIZE, data, size); else size = 0; size += USBTMC_BULK_HEADER_SIZE; padded_size = (size + 3) & ~0x3; - memset(uscpi->buffer+size, 0, padded_size - size); + memset(uscpi->buffer + size, 0, padded_size - size); ret = libusb_bulk_transfer(usb->devhdl, uscpi->bulk_out_ep, uscpi->buffer, padded_size, &transferred, diff --git a/src/serial.c b/src/serial.c index 27244da3..aa8d4dde 100644 --- a/src/serial.c +++ b/src/serial.c @@ -55,7 +55,7 @@ * * @param serial Previously initialized serial port structure. * @param[in] flags Flags to use when opening the serial port. Possible flags - * include SERIAL_RDWR, SERIAL_RDONLY. + * include SERIAL_RDWR, SERIAL_RDONLY. * * If the serial structure contains a serialcomm string, it will be * passed to serial_set_paramstr() after the port is opened. @@ -360,8 +360,8 @@ static int _serial_read(struct sr_serial_dev_inst *serial, void *buf, * @param[in] timeout_ms Timeout in ms, or 0 for no timeout. * * @retval SR_ERR_ARG Invalid argument. - * @retval SR_ERR Other error. - * @retval other The number of bytes read. If this is less than the number + * @retval SR_ERR Other error. + * @retval other The number of bytes read. If this is less than the number * requested, the timeout was reached. * * @private @@ -381,8 +381,8 @@ SR_PRIV int serial_read_blocking(struct sr_serial_dev_inst *serial, void *buf, * @param[in] count The number of bytes to read. * * @retval SR_ERR_ARG Invalid argument. - * @retval SR_ERR Other error. - * @retval other The number of bytes read. + * @retval SR_ERR Other error. + * @retval other The number of bytes read. * * @private */ @@ -401,7 +401,7 @@ SR_PRIV int serial_read_nonblocking(struct sr_serial_dev_inst *serial, void *buf * @param[in] parity The parity setting to use (0 = none, 1 = even, 2 = odd). * @param[in] stopbits The number of stop bits to use (1 or 2). * @param[in] flowcontrol The flow control settings to use (0 = none, - * 1 = RTS/CTS, 2 = XON/XOFF). + * 1 = RTS/CTS, 2 = XON/XOFF). * @param[in] rts Status of RTS line (0 or 1; required by some interfaces). * @param[in] dtr Status of DTR line (0 or 1; required by some interfaces). * @@ -477,7 +477,7 @@ SR_PRIV int serial_set_params(struct sr_serial_dev_inst *serial, int baudrate, * @param serial Previously initialized serial port structure. * @param[in] paramstr A serial communication parameters string of the form * "/{/