From: Bert Vermeulen Date: Thu, 9 Jan 2014 11:36:05 +0000 (+0100) Subject: Add SR_CONF_MAX_UNCOMPRESSED_SAMPLES. X-Git-Tag: libsigrok-0.3.0~328 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=d86e0b11c7dabcf8fbbb9f692a070f9679f0ea18;p=libsigrok.git Add SR_CONF_MAX_UNCOMPRESSED_SAMPLES. --- diff --git a/hwdriver.c b/hwdriver.c index 90661f17..00e111c6 100644 --- a/hwdriver.c +++ b/hwdriver.c @@ -100,6 +100,8 @@ static struct sr_config_info sr_config_info_data[] = { "Number of logic probes", NULL}, {SR_CONF_NUM_ANALOG_PROBES, SR_T_INT32, "analog_probes", "Number of analog probes", NULL}, + {SR_CONF_MAX_UNCOMPRESSED_SAMPLES, SR_T_UINT64, "max_uncompressed_samples", + "Maximum number of uncompressed samples", NULL}, {0, 0, NULL, NULL, NULL}, }; diff --git a/libsigrok.h b/libsigrok.h index a3011320..239820a1 100644 --- a/libsigrok.h +++ b/libsigrok.h @@ -827,7 +827,8 @@ enum { /** Power off the device. */ SR_CONF_POWER_OFF, - /** Data source for acquisition. If not present, acquisition from + /** + * Data source for acquisition. If not present, acquisition from * the device is always "live", i.e. acquisition starts when the * frontend asks and the results are sent out as soon as possible. * @@ -836,9 +837,22 @@ enum { * there is a choice. sr_config_list() returns those choices. * * In any case if a device has live acquisition capabilities, it - * is always the default. */ + * is always the default. + */ SR_CONF_DATA_SOURCE, + /** + * On devices without sample compression (or compression turned off), + * this returns the maximum number of samples that can be stored. This + * can change as probes are disabled, depending on the hardware, so + * should be queried after such changes are made. If not applicable, + * fetching this value with sr_config_get() will return SR_ERR_NA. + * + * SR_CONF_LIMIT_SAMPLES should not be set to a higher value than + * this value, if applicable. + */ + SR_CONF_MAX_UNCOMPRESSED_SAMPLES, + /*--- Acquisition modes ---------------------------------------------*/ /**