From: Uwe Hermann <redacted>
Date: Wed, 6 Mar 2013 13:10:23 +0000 (+0100)
Subject: max6921: Move files to beagleboard_nixie_cape/.
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=d7e1285ae4953d0b877cc9ed0603de16f2fde966;p=sigrok-dumps.git

max6921: Move files to beagleboard_nixie_cape/.

There could be other max6921 dumps later for different boards/setups.
---

diff --git a/vfd/max6921/README b/vfd/max6921/README
deleted file mode 100644
index a71a3fa..0000000
--- a/vfd/max6921/README
+++ /dev/null
@@ -1,65 +0,0 @@
--------------------------------------------------------------------------------
-MAX6921 Shift Register
--------------------------------------------------------------------------------
-
-This is a capture of data output to a MAX6921 high voltage shift register that
-was outputting data for a VFD clock.
-
-The signals were grabbed on a 28-pin PLCC chip (MAX6921) which outputs 20-bits
-that is crafted as a design for VFD applications.
-
-Logic analyzer setup
---------------------
-
-The logic analyzer used was Open Bench Logic Sniffer (at 10Mhz):
-
- Probe		MAX6921 Pin
- --------------------------
- 0              LOAD	
- 1		DATA
- 2		CLK
- 3		BLANK (PWM Brightness Control)
-
-Data
-----
-
-The data contain various values for the VFD being driven, as reference at the
-prototype Nixie Cape for the Beaglebone.
-
-  Digit         Bit
- --------------------------
-  0             1<<12
-  1             1<<19
-  2             1<<13
-  3             1<<18
-  4             1<<14
-  5             1<<17
-  6             1<<16
-  7             1<<15
-  8             1<<15
-  9             1<<11
-
-  Segment       Bit
- ---------------------------
-  SEG_A         1<<0
-  SEG_B         1<<1
-  SEG_C         1<<2
-  SEG_D         1<<3
-  SEG_E         1<<4
-  SEG_F         1<<5
-  SEG_G         1<<6
-  SEG_H         1<<7
-
-
-References:
------------
-
- * BeagleBoard.org Vendor Tree (https://github.com/beagleboard/kernel)
- * Beagle Nixie GitHub (https://github.com/mranostay/beagle-nixie/)
- * MAX6921 Datasheet (http://datasheets.maximintegrated.com/en/ds/MAX6921-MAX6931.pdf)
-
-The sigrok command line used was:
-
-  sigrok-cli --driver=ols:conn=/dev/ttyACM0 -d samplerate=10mhz  \
-             -samples=24576 -p 0=LOAD,1=DATA,2=CLK,3=BLANK -o max6921_data_10mhz.sr
-
diff --git a/vfd/max6921/beagleboard_nixie_cape/README b/vfd/max6921/beagleboard_nixie_cape/README
new file mode 100644
index 0000000..a71a3fa
--- /dev/null
+++ b/vfd/max6921/beagleboard_nixie_cape/README
@@ -0,0 +1,65 @@
+-------------------------------------------------------------------------------
+MAX6921 Shift Register
+-------------------------------------------------------------------------------
+
+This is a capture of data output to a MAX6921 high voltage shift register that
+was outputting data for a VFD clock.
+
+The signals were grabbed on a 28-pin PLCC chip (MAX6921) which outputs 20-bits
+that is crafted as a design for VFD applications.
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was Open Bench Logic Sniffer (at 10Mhz):
+
+ Probe		MAX6921 Pin
+ --------------------------
+ 0              LOAD	
+ 1		DATA
+ 2		CLK
+ 3		BLANK (PWM Brightness Control)
+
+Data
+----
+
+The data contain various values for the VFD being driven, as reference at the
+prototype Nixie Cape for the Beaglebone.
+
+  Digit         Bit
+ --------------------------
+  0             1<<12
+  1             1<<19
+  2             1<<13
+  3             1<<18
+  4             1<<14
+  5             1<<17
+  6             1<<16
+  7             1<<15
+  8             1<<15
+  9             1<<11
+
+  Segment       Bit
+ ---------------------------
+  SEG_A         1<<0
+  SEG_B         1<<1
+  SEG_C         1<<2
+  SEG_D         1<<3
+  SEG_E         1<<4
+  SEG_F         1<<5
+  SEG_G         1<<6
+  SEG_H         1<<7
+
+
+References:
+-----------
+
+ * BeagleBoard.org Vendor Tree (https://github.com/beagleboard/kernel)
+ * Beagle Nixie GitHub (https://github.com/mranostay/beagle-nixie/)
+ * MAX6921 Datasheet (http://datasheets.maximintegrated.com/en/ds/MAX6921-MAX6931.pdf)
+
+The sigrok command line used was:
+
+  sigrok-cli --driver=ols:conn=/dev/ttyACM0 -d samplerate=10mhz  \
+             -samples=24576 -p 0=LOAD,1=DATA,2=CLK,3=BLANK -o max6921_data_10mhz.sr
+
diff --git a/vfd/max6921/beagleboard_nixie_cape/max6921_data_10mhz.sr b/vfd/max6921/beagleboard_nixie_cape/max6921_data_10mhz.sr
new file mode 100644
index 0000000..25b4500
Binary files /dev/null and b/vfd/max6921/beagleboard_nixie_cape/max6921_data_10mhz.sr differ
diff --git a/vfd/max6921/max6921_data_10mhz.sr b/vfd/max6921/max6921_data_10mhz.sr
deleted file mode 100644
index 25b4500..0000000
Binary files a/vfd/max6921/max6921_data_10mhz.sr and /dev/null differ