From: Bert Vermeulen Date: Thu, 10 Jul 2014 15:26:22 +0000 (+0200) Subject: autoconf: Use DRIVER macro to declare drivers. X-Git-Tag: libsigrok-0.4.0~1262 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=d4b387482850b094c908ee88f3538ee906afdc15;p=libsigrok.git autoconf: Use DRIVER macro to declare drivers. --- diff --git a/Makefile.am b/Makefile.am index a34985e7..fe440c0c 100644 --- a/Makefile.am +++ b/Makefile.am @@ -248,7 +248,7 @@ libsigrok_la_SOURCES += \ hardware/norma-dmm/protocol.c \ hardware/norma-dmm/api.c endif -if HW_OLS +if HW_OPENBENCH_LOGIC_SNIFFER libsigrok_la_SOURCES += \ hardware/openbench-logic-sniffer/protocol.h \ hardware/openbench-logic-sniffer/protocol.c \ diff --git a/configure.ac b/configure.ac index 9c329369..c8992ba1 100644 --- a/configure.ac +++ b/configure.ac @@ -85,191 +85,60 @@ AC_ARG_ENABLE(all-drivers, AC_HELP_STRING([--enable-all-drivers], [HW_ENABLED_DEFAULT="$enableval"], [HW_ENABLED_DEFAULT="yes"]) -AC_ARG_ENABLE(agilent-dmm, AC_HELP_STRING([--enable-agilent-dmm], - [enable Agilent DMM support [default=yes]]), - [HW_AGILENT_DMM="$enableval"], - [HW_AGILENT_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(appa-55ii, AC_HELP_STRING([--enable-appa-55ii], - [enable APPA 55II support [default=yes]]), - [HW_APPA_55II="$enableval"], - [HW_APPA_55II=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(asix-sigma, AC_HELP_STRING([--enable-asix-sigma], - [enable ASIX SIGMA/SIGMA2 support [default=yes]]), - [HW_ASIX_SIGMA="$enableval"], - [HW_ASIX_SIGMA=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(atten-pps3xxx, AC_HELP_STRING([--enable-atten-pps3xxx], - [enable Atten PPS3xxx support [default=yes]]), - [HW_ATTEN_PPS3XXX="$enableval"], - [HW_ATTEN_PPS3XXX=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(brymen-bm86x, AC_HELP_STRING([--enable-brymen-bm86x], - [enable Brymen BM86X support [default=yes]]), - [HW_BRYMEN_BM86X="$enableval"], - [HW_BRYMEN_BM86X=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(brymen-dmm, AC_HELP_STRING([--enable-brymen-dmm], - [enable Brymen DMM support [default=yes]]), - [HW_BRYMEN_DMM="$enableval"], - [HW_BRYMEN_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(cem-dt-885x, AC_HELP_STRING([--enable-cem-dt-885x], - [enable CEM DT-885x support [default=yes]]), - [HW_CEM_DT_885X="$enableval"], - [HW_CEM_DT_885X=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(center-3xx, AC_HELP_STRING([--enable-center-3xx], - [enable Center 3xx support [default=yes]]), - [HW_CENTER_3XX="$enableval"], - [HW_CENTER_3XX=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(chronovu-la, AC_HELP_STRING([--enable-chronovu-la], - [enable ChronoVu LA support [default=yes]]), - [HW_CHRONOVU_LA="$enableval"], - [HW_CHRONOVU_LA=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(colead-slm, AC_HELP_STRING([--enable-colead-slm], - [enable Colead SLM support [default=yes]]), - [HW_COLEAD_SLM="$enableval"], - [HW_COLEAD_SLM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(conrad-digi-35-cpu, AC_HELP_STRING([--enable-conrad-digi-35-cpu], - [enable Conrad DIGI 35 CPU support [default=yes]]), - [HW_CONRAD_DIGI_35_CPU="$enableval"], - [HW_CONRAD_DIGI_35_CPU=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(demo, AC_HELP_STRING([--enable-demo], - [enable demo driver support [default=yes]]), - [HW_DEMO="$enableval"], - [HW_DEMO=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(fluke-dmm, AC_HELP_STRING([--enable-fluke-dmm], - [enable Fluke DMM support [default=yes]]), - [HW_FLUKE_DMM="$enableval"], - [HW_FLUKE_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(fx2lafw, AC_HELP_STRING([--enable-fx2lafw], - [enable fx2lafw support (for FX2 LAs). [default=yes]]), - [HW_FX2LAFW="$enableval"], - [HW_FX2LAFW=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(gmc-mh-1x-2x, AC_HELP_STRING([--enable-gmc-mh-1x-2x], - [enable gmc-mh-1x-2x support [default=yes]]), - [HW_GMC_MH_1X_2X="$enableval"], - [HW_GMC_MH_1X_2X=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(hameg-hmo, AC_HELP_STRING([--enable-hameg-hmo], - [enable Hameg HMO support [default=yes]]), - [HW_HAMEG_HMO="$enableval"], - [HW_HAMEG_HMO=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(hantek-dso, AC_HELP_STRING([--enable-hantek-dso], - [enable Hantek DSO support [default=yes]]), - [HW_HANTEK_DSO="$enableval"], - [HW_HANTEK_DSO=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(ikalogic-scanalogic2, AC_HELP_STRING([--enable-ikalogic-scanalogic2], - [enable IKALOGIC Scanalogic-2 support [default=yes]]), - [HW_IKALOGIC_SCANALOGIC2="$enableval"], - [HW_IKALOGIC_SCANALOGIC2=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(ikalogic-scanaplus, AC_HELP_STRING([--enable-ikalogic-scanaplus], - [enable IKALOGIC ScanaPLUS support [default=yes]]), - [HW_IKALOGIC_SCANAPLUS="$enableval"], - [HW_IKALOGIC_SCANAPLUS=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(kecheng-kc-330b, AC_HELP_STRING([--enable-kecheng-kc-330b], - [enable Kecheng KC-330B support [default=yes]]), - [HW_KECHENG_KC_330B="$enableval"], - [HW_KECHENG_KC_330B=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(lascar-el-usb, AC_HELP_STRING([--enable-lascar-el-usb], - [enable Lascar EL-USB support [default=yes]]), - [HW_LASCAR_EL_USB="$enableval"], - [HW_LASCAR_EL_USB=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(manson-hcs-3xxx, AC_HELP_STRING([--enable-manson-hcs-3xxx], - [enable Manson HCS-3xxx support [default=yes]]), - [HW_MANSON_HCS_3XXX="$enableval"], - [HW_MANSON_HCS_3XXX=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(mic-985xx, AC_HELP_STRING([--enable-mic-985xx], - [enable MIC 985xx support [default=yes]]), - [HW_MIC_985XX="$enableval"], - [HW_MIC_985XX=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(motech-lps-30x, AC_HELP_STRING([--enable-motech-lps-30x], - [enable motech-lps-30x support [default=yes]]), - [HW_MOTECH_LPS_30X="$enableval"], - [HW_MOTECH_LPS_30X=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(norma-dmm, AC_HELP_STRING([--enable-norma-dmm], - [enable Norma DMM support [default=yes]]), - [HW_NORMA_DMM="$enableval"], - [HW_NORMA_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(ols, AC_HELP_STRING([--enable-ols], - [enable OpenBench Logic Sniffer (OLS) support [default=yes]]), - [HW_OLS="$enableval"], - [HW_OLS=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(rigol-ds, AC_HELP_STRING([--enable-rigol-ds], - [enable Rigol DS support [default=yes]]), - [HW_RIGOL_DS="$enableval"], - [HW_RIGOL_DS=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(saleae-logic16, AC_HELP_STRING([--enable-saleae-logic16], - [enable Saleae Logic16 support [default=yes]]), - [HW_SALEAE_LOGIC16="$enableval"], - [HW_SALEAE_LOGIC16=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(serial-dmm, AC_HELP_STRING([--enable-serial-dmm], - [enable serial DMM support [default=yes]]), - [HW_SERIAL_DMM="$enableval"], - [HW_SERIAL_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(sysclk-lwla, AC_HELP_STRING([--enable-sysclk-lwla], - [enable Sysclk LWLA support [default=yes]]), - [HW_SYSCLK_LWLA="$enableval"], - [HW_SYSCLK_LWLA=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(teleinfo, AC_HELP_STRING([--enable-teleinfo], - [enable Teleinfo support [default=yes]]), - [HW_TELEINFO="$enableval"], - [HW_TELEINFO=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(testo, AC_HELP_STRING([--enable-testo], - [enable Testo support [default=yes]]), - [HW_TESTO="$enableval"], - [HW_TESTO=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(tondaj-sl-814, AC_HELP_STRING([--enable-tondaj-sl-814], - [enable Tondaj SL-814 support [default=yes]]), - [HW_TONDAJ_SL_814="$enableval"], - [HW_TONDAJ_SL_814=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(uni-t-dmm, AC_HELP_STRING([--enable-uni-t-dmm], - [enable UNI-T DMM support [default=yes]]), - [HW_UNI_T_DMM="$enableval"], - [HW_UNI_T_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(uni-t-ut32x, AC_HELP_STRING([--enable-uni-t-ut32x], - [enable UNI-T UT32x support [default=yes]]), - [HW_UNI_T_UT32X="$enableval"], - [HW_UNI_T_UT32X=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(victor-dmm, AC_HELP_STRING([--enable-victor-dmm], - [enable victor-dmm support [default=yes]]), - [HW_VICTOR_DMM="$enableval"], - [HW_VICTOR_DMM=$HW_ENABLED_DEFAULT]) - -AC_ARG_ENABLE(zeroplus-logic-cube, - AC_HELP_STRING([--enable-zeroplus-logic-cube], - [enable ZEROPLUS Logic Cube support [default=yes]]), - [HW_ZEROPLUS_LOGIC_CUBE="$enableval"], - [HW_ZEROPLUS_LOGIC_CUBE=$HW_ENABLED_DEFAULT]) +# Usage: DRIVER([Device name], [driver-name]) +# An optional third argument [no] disables that driver. +m4_define([driverize], [m4_tolower(m4_bpatsubst([$1], [[^0-9a-zA-Z-]+], [-]))]) +m4_define([upperize], [m4_toupper(m4_bpatsubst([$1], [[^0-9a-zA-Z_]+], [_]))]) +AC_DEFUN([DRIVER], [ + if test -z "$3"; then + default=$HW_ENABLED_DEFAULT + else + default="$3" + fi + AC_ARG_ENABLE($2, AC_HELP_STRING([--enable-$2], [enable $1 support]), + [m4_join([], [HW_], upperize([$2]))="$enableval"], + [m4_join([], [HW_], upperize([$2]))=$default]) + dots=$(expr substr ".............................." 1 $(expr 32 - length $2)) + driver_summary="${driver_summary} - $2${dots} ${m4_join([], [HW_], upperize([$2]))}\n" +]) + +DRIVER([Agilent DMM], [agilent-dmm]) +DRIVER([Appa 55II], [appa-55ii]) +DRIVER([ASIX SIGMA/SIGMA2], [asix-sigma]) +DRIVER([Atten PPS3xxx], [atten-pps3xxx]) +DRIVER([Brymen BM86x], [brymen-bm86x]) +DRIVER([Brymen DMM], [brymen-dmm]) +DRIVER([CEM DT-885x], [cem-dt-885x]) +DRIVER([Center 3xx], [center-3xx]) +DRIVER([ChronoVu LA], [chronovu-la]) +DRIVER([Colead SLM], [colead-slm]) +DRIVER([Conrad DIGI 35 CPU], [conrad-digi-35-cpu]) +DRIVER([demo], [demo]) +DRIVER([Fluke DMM], [fluke-dmm]) +DRIVER([fx2lafw], [fx2lafw]) +DRIVER([GMC MH 1x/2x], [gmc-mh-1x-2x]) +DRIVER([Hameg HMO], [hameg-hmo]) +DRIVER([Hantek DSO], [hantek-dso]) +DRIVER([Ikalogic Scanalogic-2], [ikalogic-scanalogic2]) +DRIVER([Ikalogic Scanaplus], [ikalogic-scanaplus]) +DRIVER([Kecheng KC-330B], [kecheng-kc-330b]) +DRIVER([Lascar EL-USB], [lascar-el-usb]) +DRIVER([Manson HCS-3xxx], [manson-hcs-3xxx]) +DRIVER([MIC 985xx], [mic-985xx]) +DRIVER([Motech LPS 30x], [motech-lps-30x]) +DRIVER([Norma DMM], [norma-dmm]) +DRIVER([OpenBench Logic Sniffer], [openbench-logic-sniffer]) +DRIVER([Rigol DS], [rigol-ds]) +DRIVER([Saleae Logic16], [saleae-logic16]) +DRIVER([serial DMM], [serial-dmm]) +DRIVER([Sysclk LWLA], [sysclk-lwla]) +DRIVER([Teleinfo], [teleinfo]) +DRIVER([Testo], [testo]) +DRIVER([Tondaj SL-814], [tondaj-sl-814]) +DRIVER([UNI-T DMM], [uni-t-dmm]) +DRIVER([UNI-T UT32x], [uni-t-ut32x]) +DRIVER([Victor DMM], [victor-dmm]) +DRIVER([ZEROPLUS Logic Cube], [zeroplus-logic-cube]) AC_ARG_ENABLE(libserialport, AC_HELP_STRING([--disable-libserialport], @@ -344,8 +213,8 @@ if test "x$have_libserialport" = "xno"; then HW_CENTER_3XX="no"; HW_COLEAD_SLM="no"; HW_CONRAD_DIGI_35_CPU="no"; HW_FLUKE_DMM="no"; HW_GMC_MH_1X_2X="no"; HW_HAMEG_HMO="no"; HW_MANSON_HCS_3XXX="no"; HW_MIC_985XX="no"; HW_MOTECH_LPS_30X="no"; - HW_NORMA_DMM="no"; HW_OLS="no"; HW_SERIAL_DMM="no"; HW_TELEINFO="no"; - HW_TONDAJ_SL_814="no"; + HW_NORMA_DMM="no"; HW_OPENBENCH_LOGIC_SNIFFER="no"; HW_SERIAL_DMM="no"; + HW_TELEINFO="no"; HW_TONDAJ_SL_814="no"; else AC_DEFINE_UNQUOTED(HAVE_LIBSERIALPORT, [1], [Specifies whether we have libserialport.]) @@ -441,7 +310,7 @@ AM_CONDITIONAL(HAVE_CHECK, test x"$have_check" = "xyes") # will not currently work on Windows. case "$host" in *mingw*) - HW_OLS="no" + HW_OPENBENCH_LOGIC_SNIFFER="no" ;; esac @@ -576,9 +445,9 @@ if test "x$HW_NORMA_DMM" = "xyes"; then AC_DEFINE(HAVE_HW_NORMA_DMM, 1, [Norma DMM support]) fi -AM_CONDITIONAL(HW_OLS, test x$HW_OLS = xyes) -if test "x$HW_OLS" = "xyes"; then - AC_DEFINE(HAVE_HW_OLS, 1, [OpenBench Logic Sniffer (OLS) support]) +AM_CONDITIONAL(HW_OPENBENCH_LOGIC_SNIFFER, test x$HW_OPENBENCH_LOGIC_SNIFFER = xyes) +if test "x$HW_OPENBENCH_LOGIC_SNIFFER" = "xyes"; then + AC_DEFINE(HAVE_HW_OPENBENCH_LOGIC_SNIFFER, 1, [OpenBench Logic Sniffer (OLS) support]) fi AM_CONDITIONAL(HW_RIGOL_DS, test x$HW_RIGOL_DS = xyes) @@ -686,43 +555,5 @@ for lib in "glib-2.0 >= 2.32.0" "libzip >= 0.10" "libserialport >= 0.1.0" "libre echo " - ($optional) $lib: $answer" done -echo -e "\nEnabled hardware drivers:\n" -echo " - agilent-dmm..................... $HW_AGILENT_DMM" -echo " - appa-55ii....................... $HW_APPA_55II" -echo " - asix-sigma...................... $HW_ASIX_SIGMA" -echo " - atten-pps3xxx................... $HW_ATTEN_PPS3XXX" -echo " - brymen-bm86x.................... $HW_BRYMEN_BM86X" -echo " - brymen-dmm...................... $HW_BRYMEN_DMM" -echo " - cem-dt-885x..................... $HW_CEM_DT_885X" -echo " - center-3xx...................... $HW_CENTER_3XX" -echo " - chronovu-la..................... $HW_CHRONOVU_LA" -echo " - colead-slm...................... $HW_COLEAD_SLM" -echo " - conrad-digi-35-cpu.............. $HW_CONRAD_DIGI_35_CPU" -echo " - demo............................ $HW_DEMO" -echo " - fluke-dmm....................... $HW_FLUKE_DMM" -echo " - fx2lafw......................... $HW_FX2LAFW" -echo " - gmc-mh-1x-2x.................... $HW_GMC_MH_1X_2X" -echo " - hameg-hmo....................... $HW_HAMEG_HMO" -echo " - hantek-dso...................... $HW_HANTEK_DSO" -echo " - ikalogic-scanalogic2............ $HW_IKALOGIC_SCANALOGIC2" -echo " - ikalogic-scanaplus.............. $HW_IKALOGIC_SCANAPLUS" -echo " - kecheng-kc-330b................. $HW_KECHENG_KC_330B" -echo " - lascar-el-usb................... $HW_LASCAR_EL_USB" -echo " - manson-hcs-3xxx................. $HW_MANSON_HCS_3XXX" -echo " - mic-985xx....................... $HW_MIC_985XX" -echo " - motech-lps-30x.................. $HW_MOTECH_LPS_30X" -echo " - norma-dmm....................... $HW_NORMA_DMM" -echo " - openbench-logic-sniffer......... $HW_OLS" -echo " - rigol-ds........................ $HW_RIGOL_DS" -echo " - saleae-logic16.................. $HW_SALEAE_LOGIC16" -echo " - serial-dmm...................... $HW_SERIAL_DMM" -echo " - sysclk-lwla..................... $HW_SYSCLK_LWLA" -echo " - teleinfo........................ $HW_TELEINFO" -echo " - testo........................... $HW_TESTO" -echo " - tondaj-sl-814................... $HW_TONDAJ_SL_814" -echo " - uni-t-dmm....................... $HW_UNI_T_DMM" -echo " - uni-t-ut32x..................... $HW_UNI_T_UT32X" -echo " - victor-dmm...................... $HW_VICTOR_DMM" -echo " - zeroplus-logic-cube............. $HW_ZEROPLUS_LOGIC_CUBE" -echo +echo -e "\nEnabled hardware drivers:\n${driver_summary}"