From: alberink Date: Thu, 19 Jun 2014 15:18:52 +0000 (+0200) Subject: Add decoder for TCA6408A I2C I/O expanders. X-Git-Tag: libsigrokdecode-0.4.0~192 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=d4026957a57e5f665fa91c8d706976613e29c1b4;p=libsigrokdecode.git Add decoder for TCA6408A I2C I/O expanders. --- diff --git a/decoders/tca6408a/__init__.py b/decoders/tca6408a/__init__.py new file mode 100644 index 0000000..9982d58 --- /dev/null +++ b/decoders/tca6408a/__init__.py @@ -0,0 +1,26 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2014 alberink +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +This decoder stacks on top of the 'i2c' PD and decodes the Texas Instruments +TCA6408A 8-bit I²C I/O expander protocol. +''' + +from .pd import * diff --git a/decoders/tca6408a/pd.py b/decoders/tca6408a/pd.py new file mode 100644 index 0000000..443a298 --- /dev/null +++ b/decoders/tca6408a/pd.py @@ -0,0 +1,131 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2012 Uwe Hermann +## Copyright (C) 2013 Matt Ranostay +## Copyright (C) 2014 alberink +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +import sigrokdecode as srd + +class Decoder(srd.Decoder): + api_version = 2 + id = 'tca6408a' + name = 'TCA6408A' + longname = 'TI TCA6408A' + desc = 'Texas Instruments TCA6408A 8-bit I²C I/O expander.' + license = 'gplv2+' + inputs = ['i2c'] + outputs = ['tca6408a'] + annotations = ( + ('register', 'Register type'), + ('value', 'Register value'), + ('warnings', 'Warning messages'), + ) + annotation_rows = ( + ('regs', 'Registers', (0, 1)), + ('warnings', 'Warnings', (2,)), + ) + + def __init__(self, **kwargs): + self.state = 'IDLE' + self.chip = -1 + + def start(self): + self.out_ann = self.register(srd.OUTPUT_ANN) + + def putx(self, data): + self.put(self.ss, self.es, self.out_ann, data) + + def handle_reg_0x00(self, b): + self.putx([1, ['State of inputs: %02X' % b]]) + + def handle_reg_0x01(self, b): + self.putx([1, ['Outputs set: %02X' % b ]]) + + def handle_reg_0x02(self, b): + self.putx([1, ['Polarity inverted: %02X' % b]]) + + def handle_reg_0x03(self, b): + self.putx([1, ['Configuration: %02X' % b]]) + + def handle_write_reg(self, b): + if b == 0: + self.putx([0, ['Input port', 'In', 'I']]) + elif b == 1: + self.putx([0, ['Output port', 'Out', 'O']]) + elif b == 2: + self.putx([0, ['Polarity inversion register', 'Pol', 'P']]) + elif b == 3: + self.putx([0, ['Configuration register', 'Conf', 'C']]) + + def check_correct_chip(self, addr): + if addr not in (0x20, 0x21): + self.putx([2, ['Warning: I²C slave 0x%02X not a TCA6408A ' + 'compatible chip.' % addr]]) + self.state = 'IDLE' + + def decode(self, ss, es, data): + cmd, databyte = data + + # Store the start/end samples of this I²C packet. + self.ss, self.es = ss, es + + # State machine. + if self.state == 'IDLE': + # Wait for an I²C START condition. + if cmd != 'START': + return + self.state = 'GET SLAVE ADDR' + self.block_start_sample = ss + elif self.state == 'GET SLAVE ADDR': + self.chip = databyte + self.state = 'GET REG ADDR' + elif self.state == 'GET REG ADDR': + # Wait for a data write (master selects the slave register). + if cmd in ('ADDRESS READ', 'ADDRESS WRITE'): + self.check_correct_chip(databyte) + if cmd != 'DATA WRITE': + return + self.reg = databyte + self.handle_write_reg(self.reg) + self.state = 'WRITE IO REGS' + elif self.state == 'WRITE IO REGS': + # If we see a Repeated Start here, the master wants to read. + if cmd == 'START REPEAT': + self.state = 'READ IO REGS' + return + # Otherwise: Get data bytes until a STOP condition occurs. + if cmd == 'DATA WRITE': + handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg) + handle_reg(databyte) + elif cmd == 'STOP': + self.state = 'IDLE' + self.chip = -1 + elif self.state == 'READ IO REGS': + # Wait for an address read operation. + if cmd == 'ADDRESS READ': + self.state = 'READ IO REGS2' + self.chip = databyte + return + elif self.state == 'READ IO REGS2': + if cmd == 'DATA READ': + handle_reg = getattr(self, 'handle_reg_0x%02x' % self.reg) + handle_reg(databyte) + elif cmd == 'STOP': + self.state = 'IDLE' +