From: Russ Dill <redacted>
Date: Tue, 3 Dec 2013 05:47:14 +0000 (-0800)
Subject: zeroplus: Just wait until not busy on data capture
X-Git-Tag: libsigrok-0.3.0~477
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=d20844e28b82704aaf0a5929d7078f57b6c59f5a;p=libsigrok.git

zeroplus: Just wait until not busy on data capture

While captures using a trigger do set the STATUS_READY bit, immediate
captures do not set the STATUS_READY bit, they just clear the STATUS_BUSY
bit. This was confirmed with packet captures using the "official" driver/app.
---

diff --git a/hardware/zeroplus-logic-cube/analyzer.c b/hardware/zeroplus-logic-cube/analyzer.c
index 79377f18..acb97e09 100644
--- a/hardware/zeroplus-logic-cube/analyzer.c
+++ b/hardware/zeroplus-logic-cube/analyzer.c
@@ -404,7 +404,7 @@ SR_PRIV void analyzer_wait(libusb_device_handle *devh, int set, int unset)
 
 	while (1) {
 		status = gl_reg_read(devh, DEV_STATUS);
-		if ((status & set) && ((status & unset) == 0))
+		if ((!set || (status & set)) && ((status & unset) == 0))
 			return;
 	}
 }
@@ -614,7 +614,7 @@ SR_PRIV void analyzer_wait_button(libusb_device_handle *devh)
 
 SR_PRIV void analyzer_wait_data(libusb_device_handle *devh)
 {
-	analyzer_wait(devh, STATUS_READY | 8, STATUS_BUSY);
+	analyzer_wait(devh, 0, STATUS_BUSY);
 }
 
 SR_PRIV int analyzer_decompress(void *input, unsigned int input_len,