From: Benjamin Larsson <redacted>
Date: Thu, 17 Dec 2015 16:37:05 +0000 (+0100)
Subject: Add a RFID EM4100 signal dump
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=be83fe11bb940b9f5cec7ea9f1905e08804113da;p=sigrok-dumps.git

Add a RFID EM4100 signal dump
---

diff --git a/rfid/em4100/rfid_copier/README b/rfid/em4100/rfid_copier/README
new file mode 100644
index 0000000..0bff5a6
--- /dev/null
+++ b/rfid/em4100/rfid_copier/README
@@ -0,0 +1,26 @@
+-------------------------------------------------------------------------------
+RFID EM4100
+-------------------------------------------------------------------------------
+
+This is a signal taken from the read pin an RFID copier. A tag was placed
+in front of the coil and the logic analyzer started sampling from within
+PulseView.
+
+The tag hex value is 0x0200F5ED8D.
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was a Saleae Logic16 clone (at 2MHz):
+
+  Probe       RFID reader
+  -----------------------
+  1           RFID reader coil
+
+
+Data
+----
+
+There is noise from the coil at the beginning and end. In the middle the tag
+repeats its message.
diff --git a/rfid/em4100/rfid_copier/em4100_0200f5ed8d.sr b/rfid/em4100/rfid_copier/em4100_0200f5ed8d.sr
new file mode 100644
index 0000000..5026538
Binary files /dev/null and b/rfid/em4100/rfid_copier/em4100_0200f5ed8d.sr differ