From: Bert Vermeulen <redacted>
Date: Tue, 27 May 2014 22:21:56 +0000 (+0200)
Subject: sysclk-lwla: Use new trigger API.
X-Git-Tag: libsigrok-0.4.0~1301
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=bbe7e48a8856c3cab7e2dcef34da8111e23a3bc3;p=libsigrok.git

sysclk-lwla: Use new trigger API.
---

diff --git a/hardware/sysclk-lwla/api.c b/hardware/sysclk-lwla/api.c
index 12a1e086..d5506539 100644
--- a/hardware/sysclk-lwla/api.c
+++ b/hardware/sysclk-lwla/api.c
@@ -34,13 +34,20 @@ static const int32_t hwcaps[] = {
 	SR_CONF_SAMPLERATE,
 	SR_CONF_EXTERNAL_CLOCK,
 	SR_CONF_CLOCK_EDGE,
-	SR_CONF_TRIGGER_TYPE,
+	SR_CONF_TRIGGER_MATCH,
 	SR_CONF_TRIGGER_SOURCE,
 	SR_CONF_TRIGGER_SLOPE,
 	SR_CONF_LIMIT_MSEC,
 	SR_CONF_LIMIT_SAMPLES,
 };
 
+static const int32_t trigger_matches[] = {
+	SR_TRIGGER_ZERO,
+	SR_TRIGGER_ONE,
+	SR_TRIGGER_RISING,
+	SR_TRIGGER_FALLING,
+};
+
 /* The hardware supports more samplerates than these, but these are the
  * options hardcoded into the vendor's Windows GUI.
  */
@@ -402,12 +409,9 @@ static int config_set(int key, GVariant *data, const struct sr_dev_inst *sdi,
 }
 
 static int config_channel_set(const struct sr_dev_inst *sdi,
-			    struct sr_channel *ch, unsigned int changes)
+		struct sr_channel *ch, unsigned int changes)
 {
 	uint64_t channel_bit;
-	uint64_t trigger_mask;
-	uint64_t trigger_values;
-	uint64_t trigger_edge_mask;
 	struct dev_context *devc;
 
 	devc = sdi->priv;
@@ -428,41 +432,6 @@ static int config_channel_set(const struct sr_dev_inst *sdi,
 			devc->channel_mask &= ~channel_bit;
 	}
 
-	if ((changes & SR_CHANNEL_SET_TRIGGER) != 0) {
-		trigger_mask = devc->trigger_mask & ~channel_bit;
-		trigger_values = devc->trigger_values & ~channel_bit;
-		trigger_edge_mask = devc->trigger_edge_mask & ~channel_bit;
-
-		if (ch->trigger && ch->trigger[0] != '\0') {
-			if (ch->trigger[1] != '\0') {
-				sr_warn("Trigger configuration \"%s\" with "
-					"multiple stages is not supported.",
-					ch->trigger);
-				return SR_ERR_ARG;
-			}
-			/* Enable trigger for this channel. */
-			trigger_mask |= channel_bit;
-
-			/* Configure edge mask and trigger value. */
-			switch (ch->trigger[0]) {
-			case '1': trigger_values |= channel_bit;
-			case '0': break;
-
-			case 'r': trigger_values |= channel_bit;
-			case 'f': trigger_edge_mask |= channel_bit;
-				  break;
-			default:
-				sr_warn("Trigger type '%c' is not supported.",
-					ch->trigger[0]);
-				return SR_ERR_ARG;
-			}
-		}
-		/* Store validated trigger setup. */
-		devc->trigger_mask = trigger_mask;
-		devc->trigger_values = trigger_values;
-		devc->trigger_edge_mask = trigger_edge_mask;
-	}
-
 	return SR_OK;
 }
 
@@ -502,8 +471,10 @@ static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
 		g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
 		*data = g_variant_builder_end(&gvb);
 		break;
-	case SR_CONF_TRIGGER_TYPE:
-		*data = g_variant_new_string(TRIGGER_TYPES);
+	case SR_CONF_TRIGGER_MATCH:
+		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+				trigger_matches, ARRAY_SIZE(trigger_matches),
+				sizeof(int32_t));
 		break;
 	case SR_CONF_TRIGGER_SOURCE:
 		*data = g_variant_new_strv(trigger_source_names,
@@ -550,6 +521,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
 	sr_info("Starting acquisition.");
 
 	devc->acquisition = acq;
+	lwla_convert_trigger(sdi);
 	ret = lwla_setup_acquisition(sdi);
 	if (ret != SR_OK) {
 		sr_err("Failed to set up acquisition.");
diff --git a/hardware/sysclk-lwla/protocol.c b/hardware/sysclk-lwla/protocol.c
index 7bb1948d..ebd2a698 100644
--- a/hardware/sysclk-lwla/protocol.c
+++ b/hardware/sysclk-lwla/protocol.c
@@ -738,6 +738,55 @@ SR_PRIV int lwla_init_device(const struct sr_dev_inst *sdi)
 	return ret;
 }
 
+SR_PRIV int lwla_convert_trigger(const struct sr_dev_inst *sdi)
+{
+	struct dev_context *devc;
+	struct sr_trigger *trigger;
+	struct sr_trigger_stage *stage;
+	struct sr_trigger_match *match;
+	const GSList *l, *m;
+	uint64_t channel_index;
+
+	devc = sdi->priv;
+
+	devc->trigger_mask = 0;
+	devc->trigger_values = 0;
+	devc->trigger_edge_mask = 0;
+
+	if (!(trigger = sr_session_trigger_get()))
+		return SR_OK;
+
+	if (g_slist_length(trigger->stages) > 1) {
+		sr_err("This device only supports 1 trigger stage.");
+		return SR_ERR;
+	}
+
+	for (l = trigger->stages; l; l = l->next) {
+		stage = l->data;
+		for (m = stage->matches; m; m = m->next) {
+			match = m->data;
+			if (!match->channel->enabled)
+				/* Ignore disabled channels with a trigger. */
+				continue;
+			channel_index = 1 << match->channel->index;
+			devc->trigger_mask |= channel_index;
+			switch (match->match) {
+			case SR_TRIGGER_ONE:
+				devc->trigger_values |= channel_index;
+				break;
+			case SR_TRIGGER_RISING:
+				devc->trigger_values |= channel_index;
+				/* Fall through for edge mask. */
+			case SR_TRIGGER_FALLING:
+				devc->trigger_edge_mask |= channel_index;
+				break;
+			}
+		}
+	}
+
+	return SR_OK;
+}
+
 /* Select the LWLA clock configuration.  If the clock source changed from
  * the previous setting, this will download a new bitstream to the FPGA.
  */
diff --git a/hardware/sysclk-lwla/protocol.h b/hardware/sysclk-lwla/protocol.h
index d77db0f7..1e353ad6 100644
--- a/hardware/sysclk-lwla/protocol.h
+++ b/hardware/sysclk-lwla/protocol.h
@@ -38,7 +38,6 @@
 #define USB_TIMEOUT	3000 /* ms */
 
 #define NUM_CHANNELS	34
-#define TRIGGER_TYPES	"01fr"
 
 /* Bit mask covering all 34 channels.
  */
@@ -253,6 +252,7 @@ SR_PRIV struct acquisition_state *lwla_alloc_acquisition_state(void);
 SR_PRIV void lwla_free_acquisition_state(struct acquisition_state *acq);
 
 SR_PRIV int lwla_init_device(const struct sr_dev_inst *sdi);
+SR_PRIV int lwla_convert_trigger(const struct sr_dev_inst *sdi);
 SR_PRIV int lwla_set_clock_config(const struct sr_dev_inst *sdi);
 SR_PRIV int lwla_setup_acquisition(const struct sr_dev_inst *sdi);
 SR_PRIV int lwla_start_acquisition(const struct sr_dev_inst *sdi);