From: AC0BI Date: Tue, 20 Dec 2022 16:54:26 +0000 (-0700) Subject: raspberrypi-pico: Comment clean up, support a more general use case model X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=b9890a3292ac709a330208aabcc9472a019edcaf;p=libsigrok.git raspberrypi-pico: Comment clean up, support a more general use case model --- diff --git a/src/hardware/raspberrypi-pico/api.c b/src/hardware/raspberrypi-pico/api.c index 90655701..e6b03648 100644 --- a/src/hardware/raspberrypi-pico/api.c +++ b/src/hardware/raspberrypi-pico/api.c @@ -38,18 +38,11 @@ static const uint32_t scanopts[] = { SR_CONF_CONN, //Required OS name for the port, i.e. /dev/ttyACM0 SR_CONF_SERIALCOMM, //Optional config of the port, i.e. 115200/8n1 }; -//The host can either provide a std_gvar_samplerates_steps or a std_gvar_samplerates. +//Sample rate can either provide a std_gvar_samplerates_steps or a std_gvar_samplerates. //The latter is just a long list of every supported rate. //For the steps, pulseview/pv/toolbars/mainbar.cpp will do a min,max,step. If step is //1 then it provides a 1,2,5,10 select otherwise it allows a spin box. //Going with the full list because while the spin box is more flexible, it is harder to read -/* -static const uint64_t samplerates[] = { - SR_HZ(10), - SR_MHZ(120), - SR_HZ(2), -}; -*/ static const uint64_t samplerates[] = { SR_KHZ(5), SR_KHZ(6), @@ -72,12 +65,13 @@ static const uint64_t samplerates[] = { SR_KHZ(500), SR_KHZ(600), SR_KHZ(800), - //Give finer granularity near the thresholds of RLE effectiveness + //Give finer granularity near the thresholds of RLE effectiveness ~1-4Msps + //Also use 1.2 and 2.4 as likely max values for ADC overclocking SR_MHZ(1), - SR_MHZ(1.25), + SR_MHZ(1.2), SR_MHZ(1.5), SR_MHZ(2), - SR_MHZ(2.5), + SR_MHZ(2.4), SR_MHZ(3), SR_MHZ(4), SR_MHZ(5), @@ -89,7 +83,17 @@ static const uint64_t samplerates[] = { SR_MHZ(30), SR_MHZ(40), SR_MHZ(60), - SR_MHZ(120) + //The baseline 120Mhz PICO clock won't support an 80 or 100 + //with non fractional divisor, but an overclocked version or one + //that modified sysclk could + SR_MHZ(80), + SR_MHZ(100), + SR_MHZ(120), + //These may not be practically useful, but someone might want to + //try to make it work with overclocking + SR_MHZ(150), + SR_MHZ(200), + SR_MHZ(240) }; static const uint32_t drvopts[] = { @@ -180,7 +184,7 @@ static GSList *scan(struct sr_dev_driver *di, GSList * options) serial_close(serial); g_usleep(100000); if (serial_open(serial, SERIAL_RDWR) != SR_OK) { - sr_err("2st serial open fail"); + sr_err("2nd serial open fail"); return NULL; } g_usleep(100000); @@ -356,7 +360,7 @@ static int config_set(uint32_t key, GVariant * data, break; case SR_CONF_LIMIT_SAMPLES: devc->limit_samples = g_variant_get_uint64(data); - sr_dbg("config_set slimit %lld\n", devc->limit_samples); + sr_dbg("config_set slimit %" PRIu64 "\n", devc->limit_samples); break; case SR_CONF_CAPTURE_RATIO: devc->capture_ratio = g_variant_get_uint64(data); @@ -384,7 +388,7 @@ static int config_get(uint32_t key, GVariant ** data, switch (key) { case SR_CONF_SAMPLERATE: *data = g_variant_new_uint64(devc->sample_rate); - sr_spew("sample rate get of %lld", devc->sample_rate); + sr_spew("sample rate get of %" PRIu64 "", devc->sample_rate); break; case SR_CONF_CAPTURE_RATIO: if (!sdi) @@ -425,8 +429,6 @@ static int config_list(uint32_t key, GVariant ** data, case SR_CONF_SAMPLERATE: sr_dbg("Return sample rate list"); *data = -// std_gvar_samplerates_steps(ARRAY_AND_SIZE -// (samplerates)); std_gvar_samplerates(ARRAY_AND_SIZE (samplerates)); break; @@ -458,10 +460,11 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) struct sr_channel *ch; struct sr_trigger *trigger; char tmpstr[20]; + char buf[32]; GSList *l; int a_enabled = 0, d_enabled = 0, len; serial = sdi->conn; - int i; + int i,num_read; devc = sdi->priv; sr_dbg("Enter acq start"); sr_dbg("dsbstart %d", devc->dig_sample_bytes); @@ -493,8 +496,6 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) (ch->enabled << ch->index); a_enabled++; } -// sr_dbg("A%d en %d mask 0x%X",ch->index,ch->enabled,devc->a_chan_mask); - } if (ch->name[0] == 'D') { devc->d_chan_mask &= ~(1 << ch->index); @@ -502,7 +503,6 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) devc->d_chan_mask |= (ch->enabled << ch->index); d_enabled++; - // sr_dbg("D%d en %d mask 0x%X",ch->index,ch->enabled,devc->d_chan_mask); } } sr_info("Channel enable masks D 0x%X A 0x%X", @@ -515,7 +515,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) } else { } - } //for all channels + }//for all channels //ensure data channels are continuous int invalid = 0; for (i = 0; i < 32; i++) { @@ -530,7 +530,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) invalid = 1; } } - //recalculate bytes_per_slice. + //recalculate bytes_per_slice based on which analog channels are enabled devc->bytes_per_slice = (a_enabled * devc->a_size); for (i = 0; i < devc->num_d_channels; i += 7) { @@ -545,20 +545,20 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) sr_dbg("bps %d\n", devc->bytes_per_slice); //Apply sample rate limits + //While earlier versions forced a lower sample rate, the PICO seems to allow + //ADC overclocking, and by not enforcing these limits it may support other devices. + //Thus call sr_err to get something into the device logs, but allowing it to progress. if ((a_enabled == 3) && (devc->sample_rate > 160000)) { sr_err - ("ERROR:3 channel ADC sample rate dropped to 160khz"); - devc->sample_rate = 160000; + ("WARN:3 channel ADC sample rate above 160khz"); } if ((a_enabled == 2) && (devc->sample_rate > 250000)) { sr_err - ("ERROR:2 channel ADC sample rate dropped to 250khz"); - devc->sample_rate = 250000; + ("WARN:2 channel ADC sample rate above 250khz"); } if ((a_enabled == 1) && (devc->sample_rate > 500000)) { sr_err - ("ERROR:1 channel ADC sample rate dropped to 500khz"); - devc->sample_rate = 500000; + ("WARN:1 channel ADC sample rate above 500khz"); } //Depending on channel configs, rates below 5ksps are possible //but such a low rate can easily stream and this eliminates a lot @@ -567,14 +567,15 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) sr_err("Sample rate override to min of 5ksps"); devc->sample_rate = 5000; } + //While PICO specs a max clock ~120-125Mhz, it does overclock in many cases + //so leaving is a warning. if (devc->sample_rate > 120000000) { - sr_err("Sample rate override to max of 120Msps"); - devc->sample_rate = 12000000; + sr_err("WARN: Sample rate above 120Msps"); } //It may take a very large number of samples to notice, but if digital and analog are enabled //and either PIO or ADC are fractional the samples will skew over time. //24Mhz is the max common divisor to the 120Mhz and 48Mhz ADC clock - //so force an integer divisor to it. + //so force an integer divisor to 24Mhz. if ((a_enabled > 0) && (d_enabled > 0)) { if (24000000ULL % (devc->sample_rate)) { uint32_t commondivint = @@ -592,9 +593,12 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) } } - //If we are only digital only or only analog print a warning that the + //If we are only digital or only analog print a warning that the //fractional divisors aren't a true PLL fractional feedback loop and thus //could have sample to sample variation. + //These warnings of course assume that the device is programmed with the expected ratios + //but non PICO implementations, or PICO implementations that use different divisors could avoid. + //This generally won't be a problem because most of the sampe_rate pulldown values are integer divisors. if (a_enabled > 0) { if (48000000ULL % (devc->sample_rate * a_enabled)) { sr_warn @@ -610,18 +614,38 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) } } - sprintf(&tmpstr[0], "R%llu\n", devc->sample_rate); + + sprintf(tmpstr, "L%" PRIu64 "\n", devc->limit_samples); if (send_serial_w_ack(serial, tmpstr) != SR_OK) { - sr_err("Sample rate to device failed"); + sr_err("Sample limit to device failed"); return SR_ERR; } - sprintf(tmpstr, "L%lld\n", devc->limit_samples); - if (send_serial_w_ack(serial, tmpstr) != SR_OK) { - sr_err("Sample limit to device failed"); + //To support future devices that may allow the analog scale/offset to change, call get_dev_cfg again to get new values + if(raspberrypi_pico_get_dev_cfg(sdi) != SR_OK){ + sr_err("get_dev_cfg failure on start"); + return SR_ERR; + } + + //With all other params set, we use the final sample rate setting as an opportunity for the device + //to communicate any errors in configuration. + //A single "*" indicates success. + //A "*" with subsequent data is success, but allows for the device to print something + //to the error console without aborting. + //A non "*" in the first character blocks the start + sprintf(tmpstr, "R%llu\n", devc->sample_rate); + num_read = send_serial_w_resp(serial, tmpstr, buf, 30); + buf[num_read]=0; + if((num_read>1)&&(buf[0]=='*')){ + sr_err("Sample rate to device success with resp %s",buf); + } + else if(!((num_read==1)&&(buf[0]=='*'))){ + sr_err("Sample rate to device failed"); + if(num_read>0){ + buf[num_read]=0; + sr_err("sample_rate error string %s",buf); + } return SR_ERR; } - - devc->sent_samples = 0; devc->byte_cnt = 0; devc->bytes_avail = 0; @@ -659,9 +683,9 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi) //While the driver supports the passing of trigger info to the device //it has been found that the sw overhead of supporting triggering and //pretrigger buffer entries etc.. ends up slowing the cores down enough - //that the effect continous sample rate isn't much higher than that of sending + //that the effective continous sample rate isn't much higher than that of sending //untriggered samples across USB. Thus this code will remain but likely may - //not be used by the device. + //not be used by the device, unless HW based triggers are implemented if ((trigger = sr_session_trigger_get(sdi->session))) { if (g_slist_length(trigger->stages) > 1) return SR_ERR_NA; @@ -796,21 +820,16 @@ static int dev_acquisition_stop(struct sr_dev_inst *sdi) if (len) sr_err("Dropping %d device bytes\n\r", len); } while (len > 0); - - - if (devc->buffer) { g_free(devc->buffer); devc->buffer = NULL; } - for (int i = 0; i < devc->num_a_channels; i++) { if (devc->a_data_bufs[i]) { g_free(devc->a_data_bufs[i]); devc->a_data_bufs[i] = NULL; } } - if (devc->d_data_buf) { g_free(devc->d_data_buf); devc->d_data_buf = NULL; @@ -820,10 +839,8 @@ static int dev_acquisition_stop(struct sr_dev_inst *sdi) g_free(devc->a_pretrig_bufs[i]); devc->a_pretrig_bufs[i] = NULL; } - serial = sdi->conn; serial_source_remove(sdi->session, serial); - return SR_OK; } diff --git a/src/hardware/raspberrypi-pico/protocol.c b/src/hardware/raspberrypi-pico/protocol.c index 2bae2f19..99971ed0 100644 --- a/src/hardware/raspberrypi-pico/protocol.c +++ b/src/hardware/raspberrypi-pico/protocol.c @@ -16,7 +16,6 @@ * You should have received a copy of the GNU General Public License * along with this program. If not, see . */ - #define _GNU_SOURCE #include @@ -60,7 +59,8 @@ SR_PRIV int send_serial_char(struct sr_serial_dev_inst *serial, char ch) return SR_OK; } -//Issue a command that expects a string return, return length of string +//Issue a command that expects a string return that is less than 30 characters. +//returns the length of string int send_serial_w_resp(struct sr_serial_dev_inst *serial, char *str, char *resp, size_t cnt) { @@ -74,14 +74,11 @@ int send_serial_w_resp(struct sr_serial_dev_inst *serial, char *str, if (num_read > 0) break; } - //sr_spew("rwprsp1 i %d nr %d",i,num_read); //Since the serial port is usb CDC we can't calculate timeouts based on baud rate but //even if the response is split between two USB transfers 10ms should be plenty. num_read += serial_read_blocking(serial, &(resp[num_read]), cnt - num_read, 10); - //sr_spew("rwrsp2 nr %d",num_read); - if ((num_read < 1) || (num_read > 30)) { sr_err("ERROR:Serial_w_resp failed (%d).", num_read); return -1; @@ -96,8 +93,9 @@ SR_PRIV int send_serial_w_ack(struct sr_serial_dev_inst *serial, char *str) char buf[2]; int num_read; //In case we have left over transfer from the device, drain them + //These should not exist in normal operation while ((num_read = serial_read_blocking(serial, buf, 2, 10))) { - //sr_dbg("swack drops 2 previous bytes %d %d",buf[0],buf[1]); + sr_dbg("swack drops 2 bytes %d %d",buf[0],buf[1]); } send_serial_str(serial, str); //1000ms timeout @@ -240,7 +238,7 @@ void process_slice(struct sr_dev_inst *sdi, struct dev_context *devc) } //If the wrptr is non-zero due to a residual from the previous serial transfer don't double count it towards byte_cnt devc->byte_cnt += slice_bytes - (devc->wrptr); - sr_spew("process slice avail %d rdptr %d sb %d byte_cnt %lld", + sr_spew("process slice avail %d rdptr %d sb %d byte_cnt %" PRIu64 "", devc->bytes_avail, devc->ser_rdptr, slice_bytes, devc->byte_cnt); //Must have a full slice or one rle byte @@ -363,8 +361,8 @@ int send_analog(struct sr_dev_inst *sdi, struct dev_context *devc, packet.payload = &analog; sr_session_send(sdi, &packet); g_slist_free(analog.meaning->channels); - } //if enabled - } //for channels + }//if enabled + }//for channels return 0; } @@ -411,15 +409,11 @@ int send_analog_ring(struct sr_dev_inst *sdi, struct dev_context *devc, analog.num_samples = num_post; analog.data = (devc->a_pretrig_bufs[i]) + start_post; - //sr_spew("ring buf %d starts at %p",i,(void *) devc->a_pretrig_bufs[i]); - //sr_spew("analog data %d starts at %p",i,(void *) analog.data); - //sr_spew("Sending A%d ring buffer oldest ",i); for (uint32_t j = 0; j < analog.num_samples; j++) { fptr = analog.data + (j * sizeof(float)); - //sr_spew("RNGDCT%d j %d %f %p",i,j,*fptr,(void *)fptr); } sr_session_send(sdi, &packet); } @@ -441,8 +435,8 @@ int send_analog_ring(struct sr_dev_inst *sdi, struct dev_context *devc, } g_slist_free(analog.meaning->channels); sr_dbg("Sending A%d ring buffer done ", i); - } //if enabled - } //for channels + }//if enabled + }//for channels return 0; } @@ -477,9 +471,6 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, sr_spew ("Process_group sending %d post trig samples dsb %d", num_samples, devc->dig_sample_bytes); - //for(int z=0;(zd_data_buf[z]); - //} if (devc->num_d_channels) { packet.type = SR_DF_LOGIC; packet.payload = &logic; @@ -492,10 +483,10 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, sr_session_send(sdi, &packet); } send_analog(sdi, devc, num_samples, 0); - } //num_sample>0 + }//num_samples >0 devc->sent_samples += num_samples; return 0; - } //trigger_fired + }//trigger_fired else { size_t num_ring_samples; size_t sptr; @@ -503,7 +494,6 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, size_t numtail; size_t numwrap; size_t srcptr; - //sr_spew("Process_group check %d pre trig samples",num_slices); //The trigger_offset is -1 if no trigger is found, but if a trigger is found //then trigger_offset is the offset into the data buffer sent to it. //The pre_trigger_samples is the total number of samples before the trigger, but limited to @@ -514,11 +504,9 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, num_slices * devc->dig_sample_bytes, &pre_trigger_samples); - //A trigger offset >=0 indicate a trigger was seen. The stl will isue the trigger to the session + //A trigger offset >=0 indicates a trigger was seen. The stl will isue the trigger to the session //and will forward all pre trigger logic samples, but we must send any post trigger logic //and all pre and post trigger analog signals - // sr_dbg("trggr_off %d",trigger_offset); - // sr_dbg("pre_samp %d",pre_trigger_samples); if (trigger_offset > -1) { devc->trigger_fired = TRUE; devc->sent_samples += pre_trigger_samples; @@ -620,7 +608,6 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, srcptr = cbuf_wrptr_cpy - num_ring_samples; sr_spew("RNG num %zu sptr %zu eptr %zu ", num_ring_samples, sptr, eptr); - //sr_spew("RNG srcptr %zu nt %zu nw %zu",srcptr,numtail,numwrap); for (i = 0; i < devc->num_a_channels; i++) { if ((devc->a_chan_mask >> i) & 1) { //copy tail @@ -631,7 +618,6 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, devc->a_data_bufs [i] [srcptr + j]; - //sr_spew("RNGCpyT C%d src %zu dest %zu",i,srcptr+j,sptr+j); } //for j } //if chan_mask } //for channels @@ -646,7 +632,6 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, devc->a_data_bufs [i] [srcptr + j]; - //sr_spew("RNGCpyW C%d src %zu dest %zu",i,srcptr+j,j); } //for j } //if chan_mask } //for channels @@ -654,7 +639,6 @@ int process_group(struct sr_dev_inst *sdi, struct dev_context *devc, (numwrap) ? numwrap : (eptr + 1) % devc->pretrig_entries; - //sr_dbg("RNG pwrptr new %u",devc->pretrig_wr_ptr); } //if any analog channel enabled and pretrig_entries } //else (trigger not detected) } //trigger not set on function entry @@ -675,7 +659,6 @@ void rle_memset(struct dev_context *devc, uint32_t num_slices) didx=devc->cbuf_wrptr*devc->dig_sample_bytes; for (k = 0; k < devc->dig_sample_bytes; k++) { devc->d_data_buf[didx + k] = devc->d_last[k]; - // sr_spew("k %d j %d v 0x%X p %d didx %d",k,j,devc->d_data_buf[(devc->cbuf_wrptr)+k],(devc->cbuf_wrptr)+k,didx); } // cbuf_wrptr always counts slices/samples (and not the bytes in the buffer) // regardless of mode @@ -709,7 +692,6 @@ SR_PRIV int raspberrypi_pico_receive(int fd, int revents, void *cb_data) sr_dbg("Reached non active state in receive %d", devc->rxstate); //don't return - we may be waiting for a final bytecnt - //return TRUE; } if (devc->rxstate == RX_IDLE) { //This is the normal end condition where we do one more receive @@ -736,29 +718,18 @@ SR_PRIV int raspberrypi_pico_receive(int fd, int revents, void *cb_data) devc->buffer[devc->wrptr + len] = 0; //Add the "#" so that spaces are clearly seen sr_dbg("rx string %s#", devc->buffer); - //This is not guaranteed to be a dataloss condition, but definitely indicates we are - //processing data right at the incoming rate. - //With the addition of the byte_cnt sent at the end we will detect any dataloss conditions - //and thus this is disabled - //if(len>=(int)bytes_rem-8){ - // sr_err("ERROR: Serial buffer near or at max depth, data from device may have been lost"); - //} devc->bytes_avail = (devc->wrptr + len); sr_spew ("rx len %d bytes_avail %ul sent_samples %ul wrptr %u", len, devc->bytes_avail, devc->sent_samples, devc->wrptr); - //sr_err("rx len %d ",len); } else if (len == 0) { return TRUE; } else { sr_err("ERROR:Negative serial read code %d", len); sdi->driver->dev_acquisition_stop(sdi); return FALSE; - } //len>0 - //This can be used as a bit bucket to drop all samples to see how host processing time effects - //the devices ability to send data. Obviously no data will be forwarded to the session so it will hang - // return TRUE; + }// if len>0 //Process the serial read data devc->ser_rdptr = 0; @@ -774,7 +745,6 @@ SR_PRIV int raspberrypi_pico_receive(int fd, int revents, void *cb_data) //But they may not use all of it, and thus the residual unused bytes are shifted to the start of the buffer //for the next call. residual_bytes = devc->bytes_avail - devc->ser_rdptr; - //sr_spew("Residuals resid %d avail %d rdptr %d wrptr %d\n",residual_bytes,devc->bytes_avail,devc->ser_rdptr,devc->wrptr); if (residual_bytes) { for (i = 0; i < residual_bytes; i++) { devc->buffer[i] = @@ -827,7 +797,7 @@ SR_PRIV int raspberrypi_pico_receive(int fd, int revents, void *cb_data) } //It's possible we need one more serial transfer to get the byte_cnt, so print that here sr_dbg("Haven't seen byte_cnt + yet"); - } //RX_STOPPED + } //if RX_STOPPED //If at the sample limit, send a "+" in case we are in continuous mode and need //to stop the device. Not that even in non continous mode there might be cases where get an extra //sample or two... diff --git a/src/hardware/raspberrypi-pico/protocol.h b/src/hardware/raspberrypi-pico/protocol.h index 6a8566ec..8bbfe3aa 100644 --- a/src/hardware/raspberrypi-pico/protocol.h +++ b/src/hardware/raspberrypi-pico/protocol.h @@ -25,15 +25,16 @@ #include #include "libsigrok-internal.h" -//This is used by sr_dbg/log etc -#define LOG_PREFIX "srgn" +//This is used by sr_dbg/log etc to indicate where a printout came from +#define LOG_PREFIX "srpico" //number of bytes between markers #define MRK_STRIDE 128 -//This must be 32 or or less since many channel enable/disable masks and other elements may be only 32 bits wide. -//But is reduced further based on pico board limitations -#define MAX_ANALOG_CHANNELS 3 -#define MAX_DIGITAL_CHANNELS 21 +//These must be 32 or or less since many channel enable/disable masks and other elements may be only 32 bits wide. +//Setting values larger than what a PICO can support to enable other devices, or possibly modes where +//channels are created from internal values rather than external pins +#define MAX_ANALOG_CHANNELS 8 +#define MAX_DIGITAL_CHANNELS 32 //digits input to sr_analog_init #define ANALOG_DIGITS 4 @@ -50,9 +51,8 @@ typedef enum rxstate { RX_STOPPED = 2, //received stop marker, waiting for byte cnt RX_ABORT = 3, //received aborted marker or other error } rxstate_t; -//TODO todo - stopped review here - renam wrptr, and review all variables struct dev_context { -/*Configuration Parameters */ +//Configuration Parameters //It is up to the user to understand sample rates and serial download speed etc and // do the right thing. i.e. don't expect continuous streaming bandwidth greater //than serial link speed etc... @@ -84,12 +84,12 @@ struct dev_context { uint16_t bytes_per_slice; //The number of bytes needed to store all channels for one sample in the device data buff uint32_t dig_sample_bytes; -/* Tracking/status once started */ +// Tracking/status once started //number of bytes in the current serial input stream uint32_t bytes_avail; - //Samples sent to the session */ + //Samples sent to the session uint32_t sent_samples; - //count total received bytes to detect lost info*/ + //count total received bytes to detect lost info uint64_t byte_cnt; //For SW based triggering we put the device into continuous transmit and stop when // we detect a sample and capture all the samples we need. trigger_fired is thus set when @@ -101,7 +101,7 @@ struct dev_context { //error been detected // gboolean device_stopped; rxstate_t rxstate; -/* Serial Related */ +// Serial Related // Serial data buffer unsigned char *buffer; //Size of incoming serial buffer @@ -111,26 +111,26 @@ struct dev_context { //write pointer into the serial input buffer uint32_t wrptr; -/* Buffering Related */ - /* parsed serial read data is split into each channels dedicated buffer for analog */ +// Buffering Related + // parsed serial read data is split into each channels dedicated buffer for analog float *a_data_bufs[MAX_ANALOG_CHANNELS]; - /*digital samples are stored packed together since cli/pulseview want it that way */ + // digital samples are stored packed together since cli/pulseview want it that way uint8_t *d_data_buf; - /*write point for the the per channel data buffers */ + // write pointer for the the per channel data buffers uint32_t cbuf_wrptr; - /*size of packet data buffers for each channel */ + // size of packet data buffers for each channel uint32_t sample_buf_size; -/* RLE related*/ - /*Previous sample values to duplicate for rle */ +// RLE related + // Previous sample values to duplicate for rle float a_last[MAX_ANALOG_CHANNELS]; uint8_t d_last[4]; -/* SW Trigger Related */ +// SW Trigger Related struct soft_trigger_logic *stl; //Maximum number of entries to store pre-trigger uint32_t pretrig_entries; - /* Analog pre-trigger storage for software based triggering - because sw based only has internal storage for logic */ + // Analog pre-trigger storage for software based triggering + // because sw based only has internal storage for logic float *a_pretrig_bufs[MAX_ANALOG_CHANNELS]; uint32_t pretrig_wr_ptr;