From: Uwe Hermann <redacted>
Date: Thu, 13 Jun 2013 23:50:39 +0000 (+0200)
Subject: manpage: Escape minus characters.
X-Git-Tag: sigrok-cli-0.5.0~90
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=b86569215cf5213e0d2421d1cf014be1c4fe1309;p=sigrok-cli.git

manpage: Escape minus characters.
---

diff --git a/doc/sigrok-cli.1 b/doc/sigrok-cli.1
index 497c317..8437d91 100644
--- a/doc/sigrok-cli.1
+++ b/doc/sigrok-cli.1
@@ -399,10 +399,11 @@ will acquire 3000000 samples.
 Sample continuously until stopped. Not all devices support this.
 .TP
 .BR "\-\-set"
-Set one or more variables specified with the \fB--config\fP option, without doing
-any acquisition.
+Set one or more variables specified with the \fB\-\-config\fP option, without
+doing any acquisition.
 .SH EXAMPLES
-In order to get exactly 100 samples from the connected fx2lafw-supported logic analyzer hardware, run the following command:
+In order to get exactly 100 samples from the connected fx2lafw-supported logic
+analyzer hardware, run the following command:
 .TP
 .B "  sigrok\-cli \-\-driver fx2lafw \-\-samples 100"
 .TP
@@ -425,7 +426,7 @@ To capture data from the first 4 probes using the Openbench Logic Sniffer lastin
 To turn on internal logging on a Lascar EL-USB series device:
 .TP
 \fBsigrok\-cli \-\-driver lascar\-el\-usb:conn=10c4.0002 \\\fP
-\fB\-\-config datalog=on --set\fP
+\fB\-\-config datalog=on \-\-set\fP
 .SH "EXIT STATUS"
 .B sigrok\-cli
 exits with 0 on success, 1 on most failures.