From: Uwe Hermann Date: Mon, 5 Jun 2017 22:09:45 +0000 (+0200) Subject: Add support for initial pin settings. X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=b59c504ecda1693417932878a8c92bab80f9635c;p=sigrok-test.git Add support for initial pin settings. Adapt all tests that require it to use the old behaviour of assuming an initial pin value of 0 (or whatever was previously hardcoded in the PD). for now (this will likely see some changes later). --- diff --git a/decoder/pdtest b/decoder/pdtest index 1cc071f..e3509b9 100755 --- a/decoder/pdtest +++ b/decoder/pdtest @@ -113,6 +113,7 @@ def parse_testfile(path, pd, tc, op_type, op_class): 'name': f.pop(0), 'channels': [], 'options': [], + 'initial_pins': [], } while len(f): if len(f) == 1: @@ -131,6 +132,12 @@ def parse_testfile(path, pd, tc, op_type, op_class): pd_spec['channels'].append([opt, val]) elif a == 'option': pd_spec['options'].append([opt, val]) + elif a == 'initial_pin': + try: + val = int(val) + except: + raise E_syntax + pd_spec['initial_pins'].append([opt, val]) else: raise E_syntax tclist[-1]['pdlist'].append(pd_spec) @@ -319,6 +326,8 @@ def run_tests(tests, fix=False): args.extend(['-p', "%s=%d" % (label, channel)]) for option, value in spd['options']: args.extend(['-o', "%s=%s" % (option, value)]) + for label, initial_pin in spd['initial_pins']: + args.extend(['-N', "%s=%d" % (label, initial_pin)]) args.extend(['-i', os.path.join(dumps_dir, tc['input'])]) for op in tc['output']: name = "%s/%s/%s" % (pd, tc['name'], op['type']) @@ -486,6 +495,8 @@ def show_tests(tests): print(" Channel %s=%d" % (label, channel)) for option, value in pd['options']: print(" Option %s=%s" % (option, value)) + for label, initial_pin in pd['initial_pins']: + print(" Initial pin %s=%d" % (label, initial_pin)) if 'stack' in tc: print(" Stack: %s" % ' '.join(tc['stack'])) print(" Input: %s" % tc['input']) diff --git a/decoder/runtc.c b/decoder/runtc.c index c31b7d3..ec8c812 100644 --- a/decoder/runtc.c +++ b/decoder/runtc.c @@ -52,10 +52,16 @@ struct option { GVariant *value; }; +struct initial_pin_info { + char *name; + int value; +}; + struct pd { const char *name; GSList *channels; GSList *options; + GSList *initial_pins; }; struct output { @@ -142,6 +148,7 @@ static void usage(const char *msg) printf(" -P \n"); printf(" -p (optional)\n"); printf(" -o (optional)\n"); + printf(" -N (optional)\n"); printf(" -i \n"); printf(" -O \n"); printf(" -f (optional)\n"); @@ -375,13 +382,15 @@ static int run_testcase(const char *infile, GSList *pdlist, struct output *op) struct option *option; GVariant *gvar; GHashTable *channels, *opts; - GSList *pdl, *l, *devices; + GSList *pdl, *l, *l2, *devices; int idx, i; int max_channel; char **decoder_class; struct sr_session *sr_sess; gboolean is_number; const char *s; + GArray *initial_pins; + struct initial_pin_info *initial_pin; if (op->outfile) { if ((op->outfd = open(op->outfile, O_CREAT|O_WRONLY, 0600)) == -1) { @@ -477,6 +486,28 @@ static int run_testcase(const char *infile, GSList *pdlist, struct output *op) g_hash_table_destroy(channels); } + /* Set initial pins. */ + if (pd->initial_pins) { + initial_pins = g_array_sized_new(FALSE, TRUE, sizeof(uint8_t), + di->dec_num_channels); + g_array_set_size(initial_pins, di->dec_num_channels); + memset(initial_pins->data, SRD_INITIAL_PIN_SAME_AS_SAMPLE0, + di->dec_num_channels); + + for (l = pd->channels, idx = 0; l; l = l->next, idx++) { + channel = l->data; + for (l2 = pd->initial_pins; l2; l2 = l2->next) { + initial_pin = l2->data; + if (!strcmp(initial_pin->name, channel->name)) + initial_pins->data[idx] = initial_pin->value; + } + } + + if (srd_inst_initial_pins_set_all(di, initial_pins) != SRD_OK) + return FALSE; + g_array_free(initial_pins, TRUE); + } + /* * If this is not the first decoder in the list, stack it * on top of the previous one. @@ -768,6 +799,7 @@ int main(int argc, char **argv) struct output *op; int ret, c; char *opt_infile, **kv, **opstr; + struct initial_pin_info *initial_pin; op = malloc(sizeof(struct output)); op->pd = NULL; @@ -781,7 +813,7 @@ int main(int argc, char **argv) opt_infile = NULL; pd = NULL; coverage = NULL; - while ((c = getopt(argc, argv, "dP:p:o:i:O:f:c:S")) != -1) { + while ((c = getopt(argc, argv, "dP:p:o:N:i:O:f:c:S")) != -1) { switch (c) { case 'd': debug = TRUE; @@ -789,11 +821,12 @@ int main(int argc, char **argv) case 'P': pd = g_malloc(sizeof(struct pd)); pd->name = g_strdup(optarg); - pd->channels = pd->options = NULL; + pd->channels = pd->options = pd->initial_pins = NULL; pdlist = g_slist_append(pdlist, pd); break; case 'p': case 'o': + case 'N': if (g_slist_length(pdlist) == 0) { /* No previous -P. */ ERR("Syntax error at '%s'", optarg); @@ -812,13 +845,19 @@ int main(int argc, char **argv) channel->channel = strtoul(kv[1], NULL, 10); /* Apply to last PD. */ pd->channels = g_slist_append(pd->channels, channel); - } else { + } else if (c == 'o') { option = malloc(sizeof(struct option)); option->key = g_strdup(kv[0]); option->value = g_variant_new_string(kv[1]); g_variant_ref_sink(option->value); /* Apply to last PD. */ pd->options = g_slist_append(pd->options, option); + } else { + initial_pin = malloc(sizeof(struct initial_pin_info)); + initial_pin->name = g_strdup(kv[0]); + initial_pin->value = strtoul(kv[1], NULL, 10); + /* Apply to last PD. */ + pd->initial_pins = g_slist_append(pd->initial_pins, initial_pin); } break; case 'i': diff --git a/decoder/test/ds1307/test.conf b/decoder/test/ds1307/test.conf index 8bf0650..052ed5d 100644 --- a/decoder/test/ds1307/test.conf +++ b/decoder/test/ds1307/test.conf @@ -1,5 +1,5 @@ test rtc_ds1307_200khz - protocol-decoder i2c channel scl=0 channel sda=1 + protocol-decoder i2c channel scl=0 channel sda=1 initial_pin scl=1 initial_pin sda=1 protocol-decoder ds1307 stack i2c ds1307 input i2c/rtc_dallas_ds1307/rtc_ds1307_200khz.sr diff --git a/decoder/test/i2c/test.conf b/decoder/test/i2c/test.conf index ed5535f..c9e7e5e 100644 --- a/decoder/test/i2c/test.conf +++ b/decoder/test/i2c/test.conf @@ -1,5 +1,5 @@ test rtc - protocol-decoder i2c channel scl=0 channel sda=1 + protocol-decoder i2c channel scl=0 channel sda=1 initial_pin scl=1 initial_pin sda=1 input i2c/rtc_dallas_ds1307/rtc_ds1307_200khz.sr output i2c annotation class data-read match rtc_ds1307_200khz_data_read.output output i2c annotation class data-write match rtc_ds1307_200khz_data_write.output diff --git a/decoder/test/jitter/test.conf b/decoder/test/jitter/test.conf index 102938d..e61cb62 100644 --- a/decoder/test/jitter/test.conf +++ b/decoder/test/jitter/test.conf @@ -1,5 +1,5 @@ test toim4243 - protocol-decoder jitter channel clk=3 channel sig=2 option clk_polarity=falling option sig_polarity=falling + protocol-decoder jitter channel clk=3 channel sig=2 option clk_polarity=falling option sig_polarity=falling initial_pin clk=0 input uart/toim4243/toim4243_10byte_send_snippet.sr output jitter annotation match toim4243.output output jitter binary class ascii-float match toim4243.bin_ascii_float diff --git a/decoder/test/parallel/test.conf b/decoder/test/parallel/test.conf index b6dd18c..cf59c30 100644 --- a/decoder/test/parallel/test.conf +++ b/decoder/test/parallel/test.conf @@ -1,5 +1,5 @@ test incremental_8ch_short_noclock - protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7 + protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7 initial_pin d0=0 initial_pin d1=1 initial_pin d2=2 input misc/demo/incremental_8ch_short.sr output parallel annotation match incremental_8ch_short_noclock.output output parallel python match incremental_8ch_short_noclock.python @@ -11,7 +11,7 @@ test incremental_8ch_short_clock output parallel python match incremental_8ch_short_clock.python test incremental_8ch_long_noclock - protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7 + protocol-decoder parallel channel d0=0 channel d1=1 channel d2=2 channel d3=3 channel d4=4 channel d5=5 channel d6=6 channel d7=7 initial_pin d0=0 initial_pin d1=1 initial_pin d2=2 input misc/demo/incremental_8ch_long.sr output parallel annotation match incremental_8ch_long_noclock.output output parallel python match incremental_8ch_long_noclock.python diff --git a/decoder/test/spdif/test.conf b/decoder/test/spdif/test.conf index cb63b0d..539f565 100644 --- a/decoder/test/spdif/test.conf +++ b/decoder/test/spdif/test.conf @@ -4,6 +4,6 @@ test exception_samplerate output spdif exception match SamplerateError test 2ch-16bit-48khz - protocol-decoder spdif channel data=0 + protocol-decoder spdif channel data=0 initial_pin data=0 input spdif/2ch-16bit-48khz/2ch-16bit-48khz.sr output spdif annotation match 2ch-16bit-48khz.output diff --git a/decoder/test/swd/test.conf b/decoder/test/swd/test.conf index 95140bd..519a071 100644 --- a/decoder/test/swd/test.conf +++ b/decoder/test/swd/test.conf @@ -1,29 +1,29 @@ test ftdi_openocd_init_write_0xabbabeeb - protocol-decoder swd channel swclk=0 channel swdio=1 + protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0 input swd/ftdi_openocd/init_write_0xabbabeeb.sr output swd annotation match ftdi_openocd/init_write_0xabbabeeb.output output swd python match ftdi_openocd/init_write_0xabbabeeb.python test ftdi_openocd_init_noreply - protocol-decoder swd channel swclk=0 channel swdio=1 + protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0 input swd/ftdi_openocd/init_noreply.sr output swd annotation match ftdi_openocd/init_noreply.output output swd python match ftdi_openocd/init_noreply.python test ftdi_openocd_init_wait_fault - protocol-decoder swd channel swclk=0 channel swdio=1 + protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0 input swd/ftdi_openocd/init_wait_fault.sr output swd annotation match ftdi_openocd/init_wait_fault.output output swd python match ftdi_openocd/init_wait_fault.python test stlink_init_write_0xabbabeeb - protocol-decoder swd channel swclk=0 channel swdio=1 + protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0 input swd/stlink_openocd/init_write_0xabbabeeb.sr output swd annotation match stlink_openocd/init_write_0xabbabeeb.output output swd python match stlink_openocd/init_write_0xabbabeeb.python test stlink_wait_retry - protocol-decoder swd channel swclk=0 channel swdio=1 + protocol-decoder swd channel swclk=0 channel swdio=1 initial_pin swclk=0 initial_pin swdio=0 input swd/stlink_openocd/wait_retry.sr output swd annotation match stlink_openocd/wait_retry.output output swd python match stlink_openocd/wait_retry.python @@ -31,7 +31,7 @@ test stlink_wait_retry # With the strict_start option set, this capture doesn't include a LINERESET # so output is empty. test stlink_wait_retry - protocol-decoder swd channel swclk=0 channel swdio=1 option strict_start=yes + protocol-decoder swd channel swclk=0 channel swdio=1 option strict_start=yes initial_pin swclk=0 initial_pin swdio=0 input swd/stlink_openocd/wait_retry.sr output swd annotation match stlink_openocd/empty.output output swd python match stlink_openocd/empty.python