From: Mike Frysinger Date: Sat, 14 Jun 2014 02:44:38 +0000 (-0400) Subject: add explicit configure flags for ftdi/serial/usb libraries X-Git-Tag: libsigrok-0.4.0~1287 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=a4737997a2dcedaa616272013b2580246c3d32eb;p=libsigrok.git add explicit configure flags for ftdi/serial/usb libraries This makes it a lot easier for distros to control this functionality. --- diff --git a/configure.ac b/configure.ac index 496bc7a2..f23e6306 100644 --- a/configure.ac +++ b/configure.ac @@ -261,6 +261,18 @@ AC_ARG_ENABLE(zeroplus-logic-cube, [HW_ZEROPLUS_LOGIC_CUBE="$enableval"], [HW_ZEROPLUS_LOGIC_CUBE=$HW_ENABLED_DEFAULT]) +AC_ARG_ENABLE(libserialport, + AC_HELP_STRING([--disable-libserialport], + [disable libserialport support [default=detect]])) + +AC_ARG_ENABLE(libftdi, + AC_HELP_STRING([--disable-libftdi], + [disable libftdi support [default=detect]])) + +AC_ARG_ENABLE(libusb, + AC_HELP_STRING([--disable-libusb], + [disable libusb support [default=detect]])) + # Checks for libraries. case "$host" in @@ -302,20 +314,29 @@ PKG_CHECK_MODULES([libzip], [libzip >= 0.10], # libserialport is only needed for some hardware drivers. Disable the # respective drivers if it is not found. -PKG_CHECK_MODULES([libserialport], [libserialport >= 0.1.0], - [have_libserialport="yes"; LIB_CFLAGS="$LIB_CFLAGS $libserialport_CFLAGS"; - LIBS="$LIBS $libserialport_LIBS"; - SR_PKGLIBS="$SR_PKGLIBS libserialport"], - [have_libserialport="no"; HW_AGILENT_DMM="no"; HW_APPA_55II="no"; +if test "x$enable_libserialport" != "xno"; then + PKG_CHECK_MODULES([libserialport], [libserialport >= 0.1.0], + [have_libserialport="yes"; LIB_CFLAGS="$LIB_CFLAGS $libserialport_CFLAGS"; + LIBS="$LIBS $libserialport_LIBS"; + SR_PKGLIBS="$SR_PKGLIBS libserialport"], + [have_libserialport="no"]) + if test "x$enable_libserialport$have_libserialport" = "xyesno"; then + AC_MSG_ERROR([libserialport support requested, but it was not found]) + fi +else + have_libserialport="no" +fi + +# Define HAVE_LIBSERIALPORT in config.h if we found libserialport. +if test "x$have_libserialport" = "xno"; then + HW_AGILENT_DMM="no"; HW_APPA_55II="no"; HW_ATTEN_PPS3XXX="no"; HW_BRYMEN_DMM="no"; HW_CEM_DT_885X="no"; HW_CENTER_3XX="no"; HW_COLEAD_SLM="no"; HW_CONRAD_DIGI_35_CPU="no"; HW_FLUKE_DMM="no"; HW_GMC_MH_1X_2X="no"; HW_HAMEG_HMO="no"; HW_MIC_985XX="no"; HW_MOTECH_LPS_30X="no"; HW_NORMA_DMM="no"; HW_OLS="no"; HW_SERIAL_DMM="no"; HW_TELEINFO="no"; - HW_TONDAJ_SL_814="no"]) - -# Define HAVE_LIBSERIALPORT in config.h if we found libserialport. -if test "x$have_libserialport" != "xno"; then + HW_TONDAJ_SL_814="no"; +else AC_DEFINE_UNQUOTED(HAVE_LIBSERIALPORT, [1], [Specifies whether we have libserialport.]) fi @@ -340,43 +361,62 @@ fi # libusb-1.0 is only needed for some hardware drivers. Disable the respective # drivers if it is not found. -case "$host" in -*freebsd*) - # FreeBSD comes with an "integrated" libusb-1.0-style USB API. - # This means libusb-1.0 is always available, no need to check for it, - # and no need to (potentially) disable any drivers if it's not found. +if test "x$enable_libusb" != "xno"; then + case "$host" in + *freebsd*) + # FreeBSD comes with an "integrated" libusb-1.0-style USB API. + # This means libusb-1.0 is always available, no need to check for it, + # and no need to (potentially) disable any drivers if it's not found. + have_libusb1_0="yes" + ;; + *) + PKG_CHECK_MODULES([libusb], [libusb-1.0 >= 1.0.16], + [have_libusb1_0="yes"; LIB_CFLAGS="$LIB_CFLAGS $libusb_CFLAGS"; + LIBS="$LIBS $libusb_LIBS"; + SR_PKGLIBS="$SR_PKGLIBS libusb-1.0"], + [have_libusb1_0="no"]) + if test "x$enable_libusb$have_libusb1_0" = "xyesno"; then + AC_MSG_ERROR([libusb support requested, but it was not found]) + fi + ;; + esac +else + have_libusb1_0="no" +fi + +# Define HAVE_LIBUSB_1_0 in config.h if we found libusb-1.0. +if test "x$have_libusb1_0" = "xno"; then + HW_BRYMEN_BM86X="no"; HW_FX2LAFW="no"; + HW_HANTEK_DSO="no"; HW_IKALOGIC_SCANALOGIC2="no"; + HW_KECHENG_KC_330B="no"; HW_LASCAR_EL_USB="no"; + HW_SYSCLK_LWLA="no"; HW_UNI_T_DMM="no"; + HW_UNI_T_UT32X="no"; HW_VICTOR_DMM="no"; + HW_ZEROPLUS_LOGIC_CUBE="no"; HW_SALEAE_LOGIC16="no"; +else AC_DEFINE_UNQUOTED(HAVE_LIBUSB_1_0, [1], [Specifies whether we have a libusb.h header.]) - ;; -*) - PKG_CHECK_MODULES([libusb], [libusb-1.0 >= 1.0.16], - [have_libusb1_0="yes"; LIB_CFLAGS="$LIB_CFLAGS $libusb_CFLAGS"; - LIBS="$LIBS $libusb_LIBS"; - SR_PKGLIBS="$SR_PKGLIBS libusb-1.0"], - [have_libusb1_0="no"; HW_BRYMEN_BM86X="no"; HW_FX2LAFW="no"; - HW_HANTEK_DSO="no"; HW_IKALOGIC_SCANALOGIC2="no"; - HW_KECHENG_KC_330B="no"; HW_LASCAR_EL_USB="no"; - HW_SYSCLK_LWLA="no"; HW_UNI_T_DMM="no"; - HW_UNI_T_UT32X="no"; HW_VICTOR_DMM="no"; - HW_ZEROPLUS_LOGIC_CUBE="no"; HW_SALEAE_LOGIC16="no"]) - - # Define HAVE_LIBUSB_1_0 in config.h if we found libusb-1.0. - if test "x$have_libusb1_0" != "xno"; then - AC_DEFINE_UNQUOTED(HAVE_LIBUSB_1_0, [1], - [Specifies whether we have a libusb.h header.]) - fi - ;; -esac +fi # USB + FX2 firmware helper code is only compiled in if libusb-1.0 was found. AM_CONDITIONAL(NEED_USB, test "x$have_libusb1_0" != xno) # libftdi is only needed for some hardware drivers. Disable them if not found. -PKG_CHECK_MODULES([libftdi], [libftdi >= 0.16], - [LIB_CFLAGS="$LIB_CFLAGS $libftdi_CFLAGS"; - LIBS="$LIBS $libftdi_LIBS"; - SR_PKGLIBS="$SR_PKGLIBS libftdi"], - [HW_ASIX_SIGMA="no"; HW_CHRONOVU_LA="no"; HW_IKALOGIC_SCANAPLUS="no"]) +if test "x$enable_libftdi" != "xno"; then + PKG_CHECK_MODULES([libftdi], [libftdi >= 0.16], + [have_libftdi="yes"; LIB_CFLAGS="$LIB_CFLAGS $libftdi_CFLAGS"; + LIBS="$LIBS $libftdi_LIBS"; + SR_PKGLIBS="$SR_PKGLIBS libftdi"], + [have_libftdi="no"]) + if test "x$enable_libftdi$have_libftdi" = "xyesno"; then + AC_MSG_ERROR([libftdi support requested, but it was not found]) + fi +else + have_libftdi="no" +fi + +if test "x$have_libftdi" = "xno"; then + HW_ASIX_SIGMA="no"; HW_CHRONOVU_LA="no"; HW_IKALOGIC_SCANAPLUS="no"; +fi # The Check unit testing framework is optional. Disable if not found. PKG_CHECK_MODULES([check], [check >= 0.9.4],