From: Uwe Hermann Date: Wed, 2 Oct 2013 17:29:54 +0000 (+0200) Subject: Rename usb_protocol to usb_packet. X-Git-Tag: libsigrokdecode-0.3.0~278 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=a015bd4926d95a5cbb25843c02eca967097f4e7e;p=libsigrokdecode.git Rename usb_protocol to usb_packet. There will be further PDs that are stacked on top of usb_packet. --- diff --git a/configure.ac b/configure.ac index 0fd8918..ca85648 100644 --- a/configure.ac +++ b/configure.ac @@ -181,7 +181,7 @@ AC_CONFIG_FILES([Makefile decoders/transitioncounter/Makefile decoders/uart/Makefile decoders/uart_dump/Makefile - decoders/usb_protocol/Makefile + decoders/usb_packet/Makefile decoders/usb_signalling/Makefile decoders/xfp/Makefile ]) diff --git a/decoders/Makefile.am b/decoders/Makefile.am index ea8091f..34843f2 100644 --- a/decoders/Makefile.am +++ b/decoders/Makefile.am @@ -49,7 +49,7 @@ SUBDIRS = \ transitioncounter \ uart \ uart_dump \ - usb_protocol \ + usb_packet \ usb_signalling \ xfp diff --git a/decoders/usb_packet/Makefile.am b/decoders/usb_packet/Makefile.am new file mode 100644 index 0000000..f095957 --- /dev/null +++ b/decoders/usb_packet/Makefile.am @@ -0,0 +1,26 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +pkgdatadir = $(DECODERS_DIR)/usb_packet + +dist_pkgdata_DATA = __init__.py pd.py + +CLEANFILES = *.pyc + diff --git a/decoders/usb_packet/__init__.py b/decoders/usb_packet/__init__.py new file mode 100644 index 0000000..555dc7f --- /dev/null +++ b/decoders/usb_packet/__init__.py @@ -0,0 +1,47 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +USB (low-speed and full-speed) packet protocol decoder. + +Protocol layer (USB spec, chapter 8): + +Bit/byte ordering: Bits are sent onto the bus LSB-first. Multibyte fields +are transmitted in little-endian order (i.e., LSB to MSB). + +SYNC field: All packets begin with a SYNC field (8 bits). + +Packet field format: Packets start with an SOP (Start Of Packet) delimiter +that is part of the SYNC field, and end with an EOP (End Of Packet). + +PID: A PID (packet identifier) follows the SYNC field of every packet. A PID +consists of a 4-bit packet type field, and a 4 bit check field. +The check field is the one's complement of the packet type field. + +Protocol output format: +TODO + +Details: +https://en.wikipedia.org/wiki/USB +http://www.usb.org/developers/docs/ +''' + +from .pd import * + diff --git a/decoders/usb_packet/pd.py b/decoders/usb_packet/pd.py new file mode 100644 index 0000000..b8c668e --- /dev/null +++ b/decoders/usb_packet/pd.py @@ -0,0 +1,137 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2011 Gareth McMullin +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# USB (low-speed and full-speed) packet protocol decoder + +import sigrokdecode as srd + +# Packet IDs (PIDs). +# The first 4 bits are the 'packet type' field, the last 4 bits are the +# 'check field' (each bit in the check field must be the inverse of the resp. +# bit in the 'packet type' field; if not, that's a 'PID error'). +# For the 4-bit strings, the left-most '1' or '0' is the LSB, i.e. it's sent +# to the bus first. +pids = { + # Tokens + '10000111': ['OUT', 'Address & EP number in host-to-function transaction'], + '10010110': ['IN', 'Address & EP number in function-to-host transaction'], + '10100101': ['SOF', 'Start-Of-Frame marker & frame number'], + '10110100': ['SETUP', 'Address & EP number in host-to-function transaction for SETUP to a control pipe'], + + # Data + # Note: DATA2 and MDATA are HS-only. + '11000011': ['DATA0', 'Data packet PID even'], + '11010010': ['DATA1', 'Data packet PID odd'], + '11100001': ['DATA2', 'Data packet PID HS, high bandwidth isosynchronous transaction in a microframe'], + '11110000': ['MDATA', 'Data packet PID HS for split and high-bandwidth isosynchronous transactions'], + + # Handshake + '01001011': ['ACK', 'Receiver accepts error-free packet'], + '01011010': ['NAK', 'Receiver cannot accept or transmitter cannot send'], + '01111000': ['STALL', 'EP halted or control pipe request unsupported'], + '01101001': ['NYET', 'No response yet from receiver'], + + # Special + '00111100': ['PRE', 'Host-issued preamble; enables downstream bus traffic to low-speed devices'], + '00111100': ['ERR', 'Split transaction error handshake'], + '00011110': ['SPLIT', 'HS split transaction token'], + '00101101': ['PING', 'HS flow control probe for a bulk/control EP'], + '00001111': ['Reserved', 'Reserved PID'], +} + +def bitstr_to_num(bitstr): + if not bitstr: + return 0 + l = list(bitstr) + l.reverse() + return int(''.join(l), 2) + +def packet_decode(packet): + sync = packet[:8] + pid = packet[8:16] + pid = pids.get(pid, (pid, ''))[0] + + # Remove CRC. + if pid in ('OUT', 'IN', 'SOF', 'SETUP'): + data = packet[16:-5] + if pid == 'SOF': + data = str(bitstr_to_num(data)) + else: + dev = bitstr_to_num(data[:7]) + ep = bitstr_to_num(data[7:]) + data = 'DEV %d EP %d' % (dev, ep) + elif pid in ('DATA0', 'DATA1'): + data = packet[16:-16] + tmp = '' + while data: + tmp += '%02x ' % bitstr_to_num(data[:8]) + data = data[8:] + data = tmp + else: + data = packet[16:] + + # The SYNC pattern for low-speed/full-speed is KJKJKJKK (0001). + if sync != '00000001': + return 'SYNC INVALID: %s' % sync + + return pid + ' ' + data + +class Decoder(srd.Decoder): + api_version = 1 + id = 'usb_packet' + name = 'USB packet' + longname = 'Universal Serial Bus (LS/FS) packet' + desc = 'USB (low-speed and full-speed) packet protocol.' + license = 'gplv2+' + inputs = ['usb_signalling'] + outputs = ['usb_packet'] + probes = [] + optional_probes = [] + options = { + 'signalling': ['Signalling', 'full-speed'], + } + annotations = [ + ['Text', 'Human-readable text'] + ] + + def __init__(self): + self.sym = 'J' + self.samplenum = 0 + self.scount = 0 + self.packet = '' + self.state = 'IDLE' + + def start(self, metadata): + self.samplerate = metadata['samplerate'] + self.out_proto = self.add(srd.OUTPUT_PROTO, 'usb_packet') + self.out_ann = self.add(srd.OUTPUT_ANN, 'usb_packet') + + def report(self): + pass + + def decode(self, ss, es, data): + (ptype, pdata) = data + + if ptype == 'PACKET': + self.put(0, 0, self.out_ann, [0, [packet_decode(pdata)]]) + + # TODO. + diff --git a/decoders/usb_protocol/Makefile.am b/decoders/usb_protocol/Makefile.am deleted file mode 100644 index 7e1baa6..0000000 --- a/decoders/usb_protocol/Makefile.am +++ /dev/null @@ -1,26 +0,0 @@ -## -## This file is part of the libsigrokdecode project. -## -## Copyright (C) 2012 Uwe Hermann -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -pkgdatadir = $(DECODERS_DIR)/usb_protocol - -dist_pkgdata_DATA = __init__.py pd.py - -CLEANFILES = *.pyc - diff --git a/decoders/usb_protocol/__init__.py b/decoders/usb_protocol/__init__.py deleted file mode 100644 index 5fa66f6..0000000 --- a/decoders/usb_protocol/__init__.py +++ /dev/null @@ -1,47 +0,0 @@ -## -## This file is part of the libsigrokdecode project. -## -## Copyright (C) 2012 Uwe Hermann -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -''' -USB (low-speed and full-speed) protocol decoder. - -Protocol layer (USB spec, chapter 8): - -Bit/byte ordering: Bits are sent onto the bus LSB-first. Multibyte fields -are transmitted in little-endian order (i.e., LSB to MSB). - -SYNC field: All packets begin with a SYNC field (8 bits). - -Packet field format: Packets start with an SOP (Start Of Packet) delimiter -that is part of the SYNC field, and end with an EOP (End Of Packet). - -PID: A PID (packet identifier) follows the SYNC field of every packet. A PID -consists of a 4-bit packet type field, and a 4 bit check field. -The check field is the one's complement of the packet type field. - -Protocol output format: -TODO - -Details: -https://en.wikipedia.org/wiki/USB -http://www.usb.org/developers/docs/ -''' - -from .pd import * - diff --git a/decoders/usb_protocol/pd.py b/decoders/usb_protocol/pd.py deleted file mode 100644 index 92ee77a..0000000 --- a/decoders/usb_protocol/pd.py +++ /dev/null @@ -1,137 +0,0 @@ -## -## This file is part of the libsigrokdecode project. -## -## Copyright (C) 2011 Gareth McMullin -## Copyright (C) 2012 Uwe Hermann -## -## This program is free software; you can redistribute it and/or modify -## it under the terms of the GNU General Public License as published by -## the Free Software Foundation; either version 2 of the License, or -## (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, -## but WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -## GNU General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program; if not, write to the Free Software -## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA -## - -# USB (low-speed and full-speed) protocol decoder - -import sigrokdecode as srd - -# Packet IDs (PIDs). -# The first 4 bits are the 'packet type' field, the last 4 bits are the -# 'check field' (each bit in the check field must be the inverse of the resp. -# bit in the 'packet type' field; if not, that's a 'PID error'). -# For the 4-bit strings, the left-most '1' or '0' is the LSB, i.e. it's sent -# to the bus first. -pids = { - # Tokens - '10000111': ['OUT', 'Address & EP number in host-to-function transaction'], - '10010110': ['IN', 'Address & EP number in function-to-host transaction'], - '10100101': ['SOF', 'Start-Of-Frame marker & frame number'], - '10110100': ['SETUP', 'Address & EP number in host-to-function transaction for SETUP to a control pipe'], - - # Data - # Note: DATA2 and MDATA are HS-only. - '11000011': ['DATA0', 'Data packet PID even'], - '11010010': ['DATA1', 'Data packet PID odd'], - '11100001': ['DATA2', 'Data packet PID HS, high bandwidth isosynchronous transaction in a microframe'], - '11110000': ['MDATA', 'Data packet PID HS for split and high-bandwidth isosynchronous transactions'], - - # Handshake - '01001011': ['ACK', 'Receiver accepts error-free packet'], - '01011010': ['NAK', 'Receiver cannot accept or transmitter cannot send'], - '01111000': ['STALL', 'EP halted or control pipe request unsupported'], - '01101001': ['NYET', 'No response yet from receiver'], - - # Special - '00111100': ['PRE', 'Host-issued preamble; enables downstream bus traffic to low-speed devices'], - '00111100': ['ERR', 'Split transaction error handshake'], - '00011110': ['SPLIT', 'HS split transaction token'], - '00101101': ['PING', 'HS flow control probe for a bulk/control EP'], - '00001111': ['Reserved', 'Reserved PID'], -} - -def bitstr_to_num(bitstr): - if not bitstr: - return 0 - l = list(bitstr) - l.reverse() - return int(''.join(l), 2) - -def packet_decode(packet): - sync = packet[:8] - pid = packet[8:16] - pid = pids.get(pid, (pid, ''))[0] - - # Remove CRC. - if pid in ('OUT', 'IN', 'SOF', 'SETUP'): - data = packet[16:-5] - if pid == 'SOF': - data = str(bitstr_to_num(data)) - else: - dev = bitstr_to_num(data[:7]) - ep = bitstr_to_num(data[7:]) - data = 'DEV %d EP %d' % (dev, ep) - elif pid in ('DATA0', 'DATA1'): - data = packet[16:-16] - tmp = '' - while data: - tmp += '%02x ' % bitstr_to_num(data[:8]) - data = data[8:] - data = tmp - else: - data = packet[16:] - - # The SYNC pattern for low-speed/full-speed is KJKJKJKK (0001). - if sync != '00000001': - return 'SYNC INVALID: %s' % sync - - return pid + ' ' + data - -class Decoder(srd.Decoder): - api_version = 1 - id = 'usb_protocol' - name = 'USB protocol' - longname = 'Universal Serial Bus (LS/FS) protocol' - desc = 'USB (low-speed and full-speed) serial protocol.' - license = 'gplv2+' - inputs = ['usb_signalling'] - outputs = ['usb_protocol'] - probes = [] - optional_probes = [] - options = { - 'signalling': ['Signalling', 'full-speed'], - } - annotations = [ - ['Text', 'Human-readable text'] - ] - - def __init__(self): - self.sym = 'J' - self.samplenum = 0 - self.scount = 0 - self.packet = '' - self.state = 'IDLE' - - def start(self, metadata): - self.samplerate = metadata['samplerate'] - self.out_proto = self.add(srd.OUTPUT_PROTO, 'usb_protocol') - self.out_ann = self.add(srd.OUTPUT_ANN, 'usb_protocol') - - def report(self): - pass - - def decode(self, ss, es, data): - (ptype, pdata) = data - - if ptype == 'PACKET': - self.put(0, 0, self.out_ann, [0, [packet_decode(pdata)]]) - - # TODO. -