From: Uwe Hermann <redacted>
Date: Thu, 29 Oct 2015 17:51:09 +0000 (+0100)
Subject: korad-kdxxxxp: Minor cosmetics and consistency changes.
X-Git-Tag: libsigrok-0.4.0~149
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=9e5366df4f83d3f5c0afb1489bb2d4d4ea426e18;p=libsigrok.git

korad-kdxxxxp: Minor cosmetics and consistency changes.
---

diff --git a/src/hardware/korad-kdxxxxp/api.c b/src/hardware/korad-kdxxxxp/api.c
index 6cbde4d0..c499d4b7 100644
--- a/src/hardware/korad-kdxxxxp/api.c
+++ b/src/hardware/korad-kdxxxxp/api.c
@@ -222,16 +222,13 @@ static int config_get(uint32_t key, GVariant **data,
 		break;
 	case SR_CONF_REGULATION:
 		/* Dual channel not supported. */
-		if (devc->cc_mode[0])
-			*data = g_variant_new_string("CC");
-		else
-			*data = g_variant_new_string("CV");
+		*data = g_variant_new_string((devc->cc_mode[0]) ? "CC" : "CV");
 		break;
 	case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
-		*data = g_variant_new_boolean(devc->OCP_enabled);
+		*data = g_variant_new_boolean(devc->ocp_enabled);
 		break;
 	case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED:
-		*data = g_variant_new_boolean(devc->OVP_enabled);
+		*data = g_variant_new_boolean(devc->ovp_enabled);
 		break;
 	default:
 		return SR_ERR_NA;
@@ -293,14 +290,14 @@ static int config_set(uint32_t key, GVariant *data,
 		break;
 	case SR_CONF_OVER_CURRENT_PROTECTION_ENABLED:
 		bval = g_variant_get_boolean(data);
-		devc->OCP_enabled = bval;
+		devc->ocp_enabled = bval;
 		devc->target = KDXXXXP_OCP;
 		if (korad_kdxxxxp_set_value(sdi->conn, devc) < 0)
 			return SR_ERR;
 		break;
 	case SR_CONF_OVER_VOLTAGE_PROTECTION_ENABLED:
 		bval = g_variant_get_boolean(data);
-		devc->OVP_enabled = bval;
+		devc->ovp_enabled = bval;
 		devc->target = KDXXXXP_OVP;
 		if (korad_kdxxxxp_set_value(sdi->conn, devc) < 0)
 			return SR_ERR;
diff --git a/src/hardware/korad-kdxxxxp/protocol.c b/src/hardware/korad-kdxxxxp/protocol.c
index bee02d9d..182908a8 100644
--- a/src/hardware/korad-kdxxxxp/protocol.c
+++ b/src/hardware/korad-kdxxxxp/protocol.c
@@ -111,11 +111,11 @@ SR_PRIV int korad_kdxxxxp_set_value(struct sr_serial_dev_inst *serial,
 		break;
 	case KDXXXXP_OCP:
 		cmd = "OCP%01.0f";
-		value = (devc->OCP_enabled) ? 1 : 0;
+		value = (devc->ocp_enabled) ? 1 : 0;
 		break;
 	case KDXXXXP_OVP:
 		cmd = "OVP%01.0f";
-		value = (devc->OVP_enabled) ? 1 : 0;
+		value = (devc->ovp_enabled) ? 1 : 0;
 		break;
 	case KDXXXXP_SAVE:
 		cmd = "SAV%01.0f";
@@ -249,13 +249,12 @@ SR_PRIV int korad_kdxxxxp_get_reply(struct sr_serial_dev_inst *serial,
 	devc->reply[count] = 0;
 
 	if (target) {
-		/* Handle the strange 'M' */
+		/* Handle the strange 'M'. */
 		if (devc->reply[0] == 'M') {
-			for (i = 1; i < count; ++i) {
+			for (i = 1; i < count; i++)
 				devc->reply[i - 1] = devc->reply[i];
-			}
-			/* Get the last character */
-			if (( i = korad_kdxxxxp_read_chars(serial, 1,
+			/* Get the last character. */
+			if ((i = korad_kdxxxxp_read_chars(serial, 1,
 						&(devc->reply[count]))) < 0)
 				return i;
 		}
@@ -274,11 +273,11 @@ SR_PRIV int korad_kdxxxxp_get_reply(struct sr_serial_dev_inst *serial,
 		 * 00 independent 01 series 11 parallel
 		 */
 		devc->beep_enabled = (1 << 4);
-		devc->OCP_enabled = (status_byte & (1 << 5));
+		devc->ocp_enabled = (status_byte & (1 << 5));
 		devc->output_enabled = (status_byte & (1 << 6));
 		/* Velleman LABPS3005 quirk */
 		if (devc->output_enabled)
-			devc->OVP_enabled = (status_byte & (1 << 7));
+			devc->ovp_enabled = (status_byte & (1 << 7));
 		sr_dbg("Status: 0x%02x", status_byte);
 		sr_spew("Status: CH1: constant %s CH2: constant %s. "
 			"Tracking would be %s. Device is "
@@ -314,7 +313,7 @@ static void next_measurement(struct dev_context *devc)
 	case KDXXXXP_VOLTAGE_MAX:
 		devc->target = KDXXXXP_CURRENT;
 		break;
-	/* Read back what was set */
+	/* Read back what was set. */
 	case KDXXXXP_BEEP:
 	case KDXXXXP_OCP:
 	case KDXXXXP_OVP:
diff --git a/src/hardware/korad-kdxxxxp/protocol.h b/src/hardware/korad-kdxxxxp/protocol.h
index c292dab5..5b7ee1c3 100644
--- a/src/hardware/korad-kdxxxxp/protocol.h
+++ b/src/hardware/korad-kdxxxxp/protocol.h
@@ -91,11 +91,11 @@ struct dev_context {
 
 	gboolean output_enabled; /**< Is the output enabled? */
 	gboolean beep_enabled;   /**< Enable beeper. */
-	gboolean OCP_enabled;    /**< Output current protection enabled */
-	gboolean OVP_enabled;    /**< Output voltage protection enabled */
+	gboolean ocp_enabled;    /**< Output current protection enabled. */
+	gboolean ovp_enabled;    /**< Output voltage protection enabled. */
 
 	/* Temporary state across callbacks */
-	int target;              /**< What reply to expect */
+	int target;              /**< What reply to expect. */
 	int program;             /**< Program to store or recall. */
 	char reply[6];
 };