From: Uwe Hermann <redacted>
Date: Fri, 13 Dec 2019 11:16:06 +0000 (+0100)
Subject: Add Grbl CNC captures.
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=963b8252635444e14dac71671a515db6c1151b46;p=sigrok-dumps.git

Add Grbl CNC captures.
---

diff --git a/stepper_motor/grbl_cnc/README b/stepper_motor/grbl_cnc/README
new file mode 100644
index 0000000..81f5ae2
--- /dev/null
+++ b/stepper_motor/grbl_cnc/README
@@ -0,0 +1,22 @@
+-------------------------------------------------------------------------------
+Grbl CNC
+-------------------------------------------------------------------------------
+
+This is a set of captures of a CNC running the Arduino-based g-code-parser
+and CNC milling controller "Grbl".
+
+Details:
+https://github.com/gnea/grbl
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was an FX2 based device (at 2MHz):
+
+  Probe       Target
+  ------------------
+  0           DIR
+  1           STEP
+  2           TX
+  3           RX
diff --git a/stepper_motor/grbl_cnc/grbl_cnc_1.sr b/stepper_motor/grbl_cnc/grbl_cnc_1.sr
new file mode 100644
index 0000000..279a6f8
Binary files /dev/null and b/stepper_motor/grbl_cnc/grbl_cnc_1.sr differ
diff --git a/stepper_motor/grbl_cnc/grbl_cnc_2.sr b/stepper_motor/grbl_cnc/grbl_cnc_2.sr
new file mode 100644
index 0000000..ef067dd
Binary files /dev/null and b/stepper_motor/grbl_cnc/grbl_cnc_2.sr differ