From: Uwe Hermann <redacted>
Date: Wed, 11 Sep 2013 17:53:31 +0000 (+0200)
Subject: uart: Don't prefix databyte output numbers.
X-Git-Tag: libsigrokdecode-0.3.0~327
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=9300bc22bad033204d369884b0f548b1e2a9bc59;p=libsigrokdecode.git

uart: Don't prefix databyte output numbers.

Previously the output was 0x41 or 0o101 or 0b1000001, now it is 41 or
101 or 1000001. We drop these prefixes, since they decrease the readability
of the PD output (especially when displayed in GUIs) and are not needed
anyway since the user knowingly selected the number format before running
the respective PD.
---

diff --git a/decoders/uart/pd.py b/decoders/uart/pd.py
index cca8952..c0968fb 100644
--- a/decoders/uart/pd.py
+++ b/decoders/uart/pd.py
@@ -206,14 +206,12 @@ class Decoder(srd.Decoder):
         self.putp(['DATA', rxtx, self.databyte[rxtx]])
 
         s = 'RX: ' if (rxtx == RX) else 'TX: '
-        self.putx(rxtx, [ANN_ASCII, [s + chr(self.databyte[rxtx])]])
-        self.putx(rxtx, [ANN_DEC,   [s + str(self.databyte[rxtx])]])
-        self.putx(rxtx, [ANN_HEX,   [s + hex(self.databyte[rxtx]),
-                                     s + hex(self.databyte[rxtx])[2:]]])
-        self.putx(rxtx, [ANN_OCT,   [s + oct(self.databyte[rxtx]),
-                                     s + oct(self.databyte[rxtx])[2:]]])
-        self.putx(rxtx, [ANN_BITS,  [s + bin(self.databyte[rxtx]),
-                                     s + bin(self.databyte[rxtx])[2:]]])
+        b = self.databyte[rxtx]
+        self.putx(rxtx, [ANN_ASCII, [s + chr(b)]])
+        self.putx(rxtx, [ANN_DEC,   [s + str(b)]])
+        self.putx(rxtx, [ANN_HEX,   [s + hex(b)[2:]]])
+        self.putx(rxtx, [ANN_OCT,   [s + oct(b)[2:]]])
+        self.putx(rxtx, [ANN_BITS,  [s + bin(b)[2:]]])
 
     def get_parity_bit(self, rxtx, signal):
         # If no parity is used/configured, skip to the next state immediately.