From: Aleksander Alekseev <redacted>
Date: Thu, 3 May 2018 12:04:47 +0000 (+0200)
Subject: spiflash: Add basic Adesto AT45DBxx support (WRITE1/2, STATUS).
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=8a73c6c7b727363ad959598ca87310fad72f7e62;p=libsigrokdecode.git

spiflash: Add basic Adesto AT45DBxx support (WRITE1/2, STATUS).
---

diff --git a/decoders/spiflash/lists.py b/decoders/spiflash/lists.py
index 9aa6bd4..1785333 100644
--- a/decoders/spiflash/lists.py
+++ b/decoders/spiflash/lists.py
@@ -37,6 +37,8 @@ cmds = OrderedDict([
     (0x60, ('CE', 'Chip erase')),
     (0x70, ('ESRY', 'Enable SO to output RY/BY#')),
     (0x80, ('DSRY', 'Disable SO to output RY/BY#')),
+    (0x82, ('WRITE1', 'Main memory page program through buffer 1 with built-in erase')),
+    (0x85, ('WRITE2', 'Main memory page program through buffer 2 with built-in erase')),
     (0x90, ('REMS', 'Read electronic manufacturer & device ID')),
     (0x9f, ('RDID', 'Read identification')),
     (0xab, ('RDP/RES', 'Release from deep powerdown / Read electronic ID')),
@@ -46,6 +48,7 @@ cmds = OrderedDict([
     (0xbb, ('2READ', '2x I/O read')), # a.k.a. "Fast read dual I/O".
     (0xc1, ('EXSO', 'Exit secured OTP')),
     (0xc7, ('CE2', 'Chip erase')), # Alternative command ID
+    (0xd7, ('STATUS', 'Status register read')),
     (0xd8, ('BE', 'Block erase')),
     (0xef, ('REMS2', 'Read ID for 2x I/O mode')),
 ])
diff --git a/decoders/spiflash/pd.py b/decoders/spiflash/pd.py
index 07934c5..1263cd8 100644
--- a/decoders/spiflash/pd.py
+++ b/decoders/spiflash/pd.py
@@ -25,8 +25,8 @@ L = len(cmds)
 # Don't forget to keep this in sync with 'cmds' is lists.py.
 class Ann:
     WRSR, PP, READ, WRDI, RDSR, WREN, FAST_READ, SE, RDSCUR, WRSCUR, \
-    RDSR2, CE, ESRY, DSRY, REMS, RDID, RDP_RES, CP, ENSO, DP, READ2X, \
-    EXSO, CE2, BE, REMS2, \
+    RDSR2, CE, ESRY, DSRY, WRITE1, WRITE2, REMS, RDID, RDP_RES, CP, ENSO, DP, \
+    READ2X, EXSO, CE2, STATUS, BE, REMS2, \
     BIT, FIELD, WARN = range(L + 3)
 
 def cmd_annotation_classes():
@@ -273,6 +273,30 @@ class Decoder(srd.Decoder):
             self.data.append(miso)
         self.cmdstate += 1
 
+    def handle_write_common(self, mosi, miso, ann):
+        # Write data bytes: Master asserts CS#, sends WRITE command, sends
+        # 3-byte address, writes >= 1 data bytes, de-asserts CS#.
+        if self.cmdstate == 1:
+            # Byte 1: Master sends command ID.
+            self.emit_cmd_byte()
+        elif self.cmdstate in (2, 3, 4):
+            # Bytes 2/3/4: Master sends write address (24bits, MSB-first).
+            self.emit_addr_bytes(mosi)
+        elif self.cmdstate >= 5:
+            # Bytes 5-x: Master writes data bytes (until CS# de-asserted).
+            self.es_field = self.es # Will be overwritten for each byte.
+            if self.cmdstate == 5:
+                self.ss_field = self.ss
+                self.on_end_transaction = lambda: self.output_data_block('Data', ann)
+            self.data.append(mosi)
+        self.cmdstate += 1
+
+    def handle_write1(self, mosi, miso):
+        self.handle_write_common(mosi, miso, Ann.WRITE1)
+
+    def handle_write2(self, mosi, miso):
+        self.handle_write_common(mosi, miso, Ann.WRITE2)
+
     def handle_fast_read(self, mosi, miso):
         # Fast read: Master asserts CS#, sends FAST READ command, sends
         # 3-byte address + 1 dummy byte, reads >= 1 data bytes, de-asserts CS#.
@@ -324,6 +348,20 @@ class Decoder(srd.Decoder):
             self.data.append(b2)
         self.cmdstate += 1
 
+    def handle_status(self, mosi, miso):
+        if self.cmdstate == 1:
+            # Byte 1: Master sends command ID.
+            self.emit_cmd_byte()
+            self.on_end_transaction = lambda: self.putc([Ann.STATUS, [cmds[self.state][1]]])
+        else:
+            # Will be overwritten for each byte.
+            self.es_cmd = self.es
+            self.es_field = self.es
+            if self.cmdstate == 2:
+                self.ss_field = self.ss
+            self.putx([Ann.BIT, ['Status register byte %d: 0x%02x' % ((self.cmdstate % 2) + 1, miso)]])
+        self.cmdstate += 1
+
     # TODO: Warn/abort if we don't see the necessary amount of bytes.
     # TODO: Warn if WREN was not seen before.
     def handle_se(self, mosi, miso):