From: Daniel Elstner <redacted>
Date: Tue, 14 Jan 2014 00:28:00 +0000 (+0100)
Subject: sysclk-lwla: Fix calculation of the running sample count.
X-Git-Tag: libsigrok-0.3.0~293
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=8a3ddd8815aea40a2efd5987e754df1ec1322337;p=libsigrok.git

sysclk-lwla: Fix calculation of the running sample count.

Field 7 of the status response is actually a duration in
milliseconds at all samplerates but 125 MHz.
---

diff --git a/hardware/sysclk-lwla/protocol.c b/hardware/sysclk-lwla/protocol.c
index 5b3dd6fc..3618eb11 100644
--- a/hardware/sysclk-lwla/protocol.c
+++ b/hardware/sysclk-lwla/protocol.c
@@ -341,6 +341,8 @@ static void issue_stop_capture(const struct sr_dev_inst *sdi)
  */
 static void process_capture_status(const struct sr_dev_inst *sdi)
 {
+	uint64_t duration;
+	uint64_t timescale;
 	struct dev_context *devc;
 	struct acquisition_state *acq;
 
@@ -358,12 +360,17 @@ static void process_capture_status(const struct sr_dev_inst *sdi)
 	 * in the FPGA.  These fields are definitely less than 64 bit wide
 	 * internally, and the unused bits occasionally even contain garbage.
 	 */
-	acq->mem_addr_fill    = LWLA_READ32(&acq->xfer_buf_in[0]);
-	acq->captured_samples = LWLA_READ32(&acq->xfer_buf_in[8])
-				* (uint64_t)100000;
-	acq->capture_flags    = LWLA_READ32(&acq->xfer_buf_in[16])
+	acq->mem_addr_fill = LWLA_READ32(&acq->xfer_buf_in[0]);
+	duration           = LWLA_READ32(&acq->xfer_buf_in[8]);
+	acq->capture_flags = LWLA_READ32(&acq->xfer_buf_in[16])
 				& STATUS_FLAG_MASK;
 
+	/* The 125 MHz setting is special, and uses the same timebase
+	 * for the duration field as the 100 MHz setting.
+	 */
+	timescale = MIN(devc->samplerate, SR_MHZ(100));
+	acq->captured_samples = (duration * timescale) / 1000;
+
 	sr_spew("Captured %lu words, %" PRIu64 " samples, flags 0x%02X",
 		(unsigned long)acq->mem_addr_fill,
 		acq->captured_samples, acq->capture_flags);