From: Uwe Hermann Date: Mon, 14 May 2012 20:38:17 +0000 (+0200) Subject: Move USB HID dumps to usb/hid/ subdir. X-Git-Tag: sigrok-dumps-0.1.0~2 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=8a09d657d42993d30d6fb8ecfcee2341dab794a7;p=libsigrokdecode.git Move USB HID dumps to usb/hid/ subdir. --- diff --git a/usb/hid/lisa_m_usbhid/README b/usb/hid/lisa_m_usbhid/README new file mode 100644 index 0000000..deaf551 --- /dev/null +++ b/usb/hid/lisa_m_usbhid/README @@ -0,0 +1,37 @@ +------------------------------------------------------------------------------- +Lisa/M USB HID example (USB Full-Speed and SPI) +------------------------------------------------------------------------------- + +This capture is taken from the libopencm3 example for a USB HID device on the +Paparazzi Lisa/M board. In this applicaton an SPI accellerometer is read and +the values are transmitted on a USB IN endpoint as mouse movement. + +Details: +http://libopencm3.org +http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/lisa-m/usb_hid +http://paparazzi.enac.fr/wiki/User/LisaM + + +Logic analyser setup +-------------------- + +The logic analyzer used was an Openbench Logic Sniffer (at 50MHz): + + Probe Signal + --------------- + 0 USB_DM + 1 USB_DP + 2 SPI_NCS + 3 SPI_SCK + 4 SPI_MOSI + 5 SPI_MISO + +The sigrok command line used was: + + sigrok-cli -d 0:samplerate=50mhz:rle=on \ + -p 1=USB_DM,2=USB_DP,3=SPI_NCS,4=SPI_SCK,5=SPI_MOSI,6=SPI_MISO \ + --time=50ms -o lisa_m_usb_spi.sr + +The OLS can't actually capture 50ms, so it just captures as much as it can +buffer. No triggering was used. + diff --git a/usb/hid/lisa_m_usbhid/lisa_m_usb_spi.sr b/usb/hid/lisa_m_usbhid/lisa_m_usb_spi.sr new file mode 100644 index 0000000..33610fe Binary files /dev/null and b/usb/hid/lisa_m_usbhid/lisa_m_usb_spi.sr differ diff --git a/usb/hid/olimex_stm32-h103_usb_hid/README b/usb/hid/olimex_stm32-h103_usb_hid/README new file mode 100644 index 0000000..b4959cd --- /dev/null +++ b/usb/hid/olimex_stm32-h103_usb_hid/README @@ -0,0 +1,36 @@ +------------------------------------------------------------------------------- +USB HID +------------------------------------------------------------------------------- + +This is a set of example captures of USB/HID communication on an Olimex +STM32-H103 eval board with an ST STM32 (ARM Cortex-M3) microcontroller. + +The firmware on the board is a simple libopencm3 example named 'usb_hid' +which lets the mouse curser move a small amount to the left and then back +to the right in an infinite loop. + +Details: +http://olimex.com/dev/stm32-h103.html +http://libopencm3.org +http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/stm32-h103/usb_hid + + +Logic analyzer setup +-------------------- + +The logic analyzer used was a ChronoVu LA8 (at 100MHz): + + Probe STM32-H103 + ---------------------- + 6 (blue) DM + 7 (yellow) DP + + +olimex_stm32-h103_usb_hid.sr +---------------------------- + +The sigrok command line used was: + + sigrok-cli -d 0:samplerate=100mhz --samples 8388608 \ + -p '7=DM,8=DP' -o + diff --git a/usb/hid/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr b/usb/hid/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr new file mode 100644 index 0000000..88c0b1c Binary files /dev/null and b/usb/hid/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr differ diff --git a/usb/lisa_m_usbhid/README b/usb/lisa_m_usbhid/README deleted file mode 100644 index deaf551..0000000 --- a/usb/lisa_m_usbhid/README +++ /dev/null @@ -1,37 +0,0 @@ -------------------------------------------------------------------------------- -Lisa/M USB HID example (USB Full-Speed and SPI) -------------------------------------------------------------------------------- - -This capture is taken from the libopencm3 example for a USB HID device on the -Paparazzi Lisa/M board. In this applicaton an SPI accellerometer is read and -the values are transmitted on a USB IN endpoint as mouse movement. - -Details: -http://libopencm3.org -http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/lisa-m/usb_hid -http://paparazzi.enac.fr/wiki/User/LisaM - - -Logic analyser setup --------------------- - -The logic analyzer used was an Openbench Logic Sniffer (at 50MHz): - - Probe Signal - --------------- - 0 USB_DM - 1 USB_DP - 2 SPI_NCS - 3 SPI_SCK - 4 SPI_MOSI - 5 SPI_MISO - -The sigrok command line used was: - - sigrok-cli -d 0:samplerate=50mhz:rle=on \ - -p 1=USB_DM,2=USB_DP,3=SPI_NCS,4=SPI_SCK,5=SPI_MOSI,6=SPI_MISO \ - --time=50ms -o lisa_m_usb_spi.sr - -The OLS can't actually capture 50ms, so it just captures as much as it can -buffer. No triggering was used. - diff --git a/usb/lisa_m_usbhid/lisa_m_usb_spi.sr b/usb/lisa_m_usbhid/lisa_m_usb_spi.sr deleted file mode 100644 index 33610fe..0000000 Binary files a/usb/lisa_m_usbhid/lisa_m_usb_spi.sr and /dev/null differ diff --git a/usb/olimex_stm32-h103_usb_hid/README b/usb/olimex_stm32-h103_usb_hid/README deleted file mode 100644 index b4959cd..0000000 --- a/usb/olimex_stm32-h103_usb_hid/README +++ /dev/null @@ -1,36 +0,0 @@ -------------------------------------------------------------------------------- -USB HID -------------------------------------------------------------------------------- - -This is a set of example captures of USB/HID communication on an Olimex -STM32-H103 eval board with an ST STM32 (ARM Cortex-M3) microcontroller. - -The firmware on the board is a simple libopencm3 example named 'usb_hid' -which lets the mouse curser move a small amount to the left and then back -to the right in an infinite loop. - -Details: -http://olimex.com/dev/stm32-h103.html -http://libopencm3.org -http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/stm32-h103/usb_hid - - -Logic analyzer setup --------------------- - -The logic analyzer used was a ChronoVu LA8 (at 100MHz): - - Probe STM32-H103 - ---------------------- - 6 (blue) DM - 7 (yellow) DP - - -olimex_stm32-h103_usb_hid.sr ----------------------------- - -The sigrok command line used was: - - sigrok-cli -d 0:samplerate=100mhz --samples 8388608 \ - -p '7=DM,8=DP' -o - diff --git a/usb/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr b/usb/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr deleted file mode 100644 index 88c0b1c..0000000 Binary files a/usb/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr and /dev/null differ