From: Uwe Hermann Date: Sun, 18 Mar 2012 19:24:31 +0000 (+0100) Subject: cli: manpage: Document -l, -a, and -s. X-Git-Tag: sigrok-cli-0.3.0~12 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=85f2ddbb7b5bddc1326af1e9ed76b327ee3d10fe;p=sigrok-cli.git cli: manpage: Document -l, -a, and -s. Also, update list of supporter input/output formats. --- diff --git a/doc/sigrok-cli.1 b/doc/sigrok-cli.1 index 2150a84..a8b1f83 100644 --- a/doc/sigrok-cli.1 +++ b/doc/sigrok-cli.1 @@ -2,7 +2,7 @@ .SH "NAME" sigrok\-cli \- Command-line client for the sigrok logic analyzer software .SH "SYNOPSIS" -.B sigrok\-cli \fR[\fB\-hVDiIoOdptwa\fR] [\fB\-h\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] [\fB\-D\fR|\fB\-\-list\-devices\fR] [\fB\-i\fR|\fB\-\-input\-file\fR filename] [\fB\-I\fR|\fB\-\-input\-format\fR format] [\fB\-o\fR|\fB\-\-output\-file\fR filename] [\fB\-O\fR|\fB\-\-output-format\fR format] [\fB\-d\fR|\fB\-\-device\fR device] [\fB\-p\fR|\fB\-\-probes\fR probelist] [\fB\-t\fR|\fB\-\-triggers\fR triggerlist] [\fB\-w\fR|\fB\-\-wait\-triggers\fR] [\fB\-a\fR|\fB\-\-protocol\-decoders\fR sequence] [\fB\-\-time\fR ms] [\fB\-\-samples\fR numsamples] [\fB\-\-continuous\fR] +.B sigrok\-cli \fR[\fB\-hVlDiIoOdptwas\fR] [\fB\-h\fR|\fB\-\-help\fR] [\fB\-V\fR|\fB\-\-version\fR] [\fB\-l\fR|\fB\-\-loglevel\fR level] [\fB\-D\fR|\fB\-\-list\-devices\fR] [\fB\-i\fR|\fB\-\-input\-file\fR filename] [\fB\-I\fR|\fB\-\-input\-format\fR format] [\fB\-o\fR|\fB\-\-output\-file\fR filename] [\fB\-O\fR|\fB\-\-output-format\fR format] [\fB\-d\fR|\fB\-\-device\fR device] [\fB\-p\fR|\fB\-\-probes\fR probelist] [\fB\-t\fR|\fB\-\-triggers\fR triggerlist] [\fB\-w\fR|\fB\-\-wait\-trigger\fR] [\fB\-a\fR|\fB\-\-protocol\-decoders\fR list] [\fB\-s\fR|\fB\-\-protocol\-decoder\-stack\fR stack] [\fB\-\-time\fR ms] [\fB\-\-samples\fR numsamples] [\fB\-\-continuous\fR] .SH "DESCRIPTION" .B sigrok\-cli is a cross-platform command line utility for the @@ -11,7 +11,7 @@ logic analyzer software. .PP The command-line frontend for sigrok cannot display graphical output, but is still sufficient to run through the whole process of hardware initialization, -acquisition, protocol analysis and saving the session. +acquisition, protocol decoding and saving the session. .PP It is useful for running on remote or embedded systems, netbooks, PDAs, and for various other use-cases. It can display samples on standard output or @@ -27,6 +27,18 @@ Show version, and information about supported hardware drivers, input file formats, output file formats, and protocol decoders. .TP +.BR "\-l, \-\-loglevel " +Set the libsigrok and libsigrokdecode loglevel. At the moment +.B sigrok-cli +doesn't support setting the two loglevels independently. The higher the +number, the more debug output will be printed. Valid loglevels are +.BR 0 " (NONE)," +.BR 1 " (ERR)," +.BR 2 " (WARN)," +.BR 3 " (INFO)," +.BR 4 " (DBG), and" +.BR 5 " (SPEW)." +.TP .B "\-D, \-\-list\-devices" List all logic analyzer devices found on the system. This actively scans for devices (USB, serial port, and others). @@ -64,8 +76,10 @@ Supported formats currently include .BR ascii , .BR binary , .BR vcd , -.BR ols ", and" -.BR gnuplot . +.BR ols , +.BR gnuplot , +.BR chronovu-la8 ", and" +.BR csv . .sp The .B bits @@ -160,7 +174,7 @@ effectively corresponds to .BR 01 . .br .BR "c" : -Any kind of change on a pin. +Any kind of change on a pin (either a rising or a falling edge). .sp Not every device supports all of these trigger types. Use the .B "\-d " @@ -173,6 +187,87 @@ any pre-trigger data. This option is useful if you don't care about the data that came before the trigger (but the logic analyzer hardware delivers this data to sigrok nonetheless). .TP +.BR "\-a, \-\-protocol\-decoders " +This option allows the user to specify a comma-separated list of protocol +decoders to be used in this session. The decoders are specified by their +ID, as shown in the +.B \-\-version +output. +.sp +Example: +.sp + $ +.B "sigrok\-cli \-i \-a i2c" +.sp +Each protocol decoder can optionally be followed by a colon-separated list +of options, where each option takes the form +.BR "key=value" . +.sp +Example: +.sp + $ +.B "sigrok\-cli \-i \-a uart:baudrate=115200:parity=odd" +.sp +The list of supported options depends entirely on the protocol decoder. Every +protocol decoder has different options it supports. +.sp +Any "options" specified for a protocol decoder which are not actually +supported options, will be interpreted as being probe name/number assignments. +.sp +Example: +.sp + $ +.B "sigrok\-cli \-i " +.br +.B " \-a spi:wordsize=9:miso=1:mosi=5:sck=3:cs=0" +.sp +In this example, +.B wordsize +is an option supported by the +.B spi +protocol decoder. Additionally, the user tells sigrok to decode the SPI +protocol using probe 1 as MISO signal for SPI, probe 5 as MOSI, probe 3 +as SCK, and probe 0 as CS# signal. +.TP +.BR "\-s, \-\-protocol\-decoder\-stack " +This option allows the user to specify a protocol decoder stack, i.e. +the way in which one protocol decoder's output gets piped into another +protocol decoder. +.sp +The decoders are specified by their ID, as shown in the +.B \-\-version +output. In addition to the +.B \-s +option, all protocol decoders that are used in a stack, must also be specified +(together with their options, if any) using the +.B \-a +parameter. +.sp +Example: +.sp + $ +.B "sigrok\-cli \-i \-a i2c:sda=4,scl=7,rtc8564" +.br +.B " \-s i2c,rtc8564" +.sp +In this example, the +.B \-s +option specifies that the output of the +.BR i2c " decoder" +is piped into the +.BR rtc8564 " decoder," +i.e., the +.BR rtc8564 " decoder" +is stacked on top of the +.BR i2c " decoder." +.sp +The respective protocol decoder options and probe name/number assignments +must be given using the +.B \-a +option (you cannot specify them in the +.B \-s +option). +.TP .BR "\-\-time " Sample for .B @@ -205,7 +300,7 @@ Alternatively, you can also use: .TP To capture data from 4 probes lasting 100ms at 10 MHz starting at the trigger condition 1:high, 2:rising, 3:low, 4:high, use: .TP -.B " sigrok\-cli \-O bits \-p 1\-4 \-\-time 100 \-o samplerate=10m \\\\" +.B " sigrok\-cli -d 0:samplerate=10m \-O bits \-p 1\-4 \-\-time 100 \\\\" .B " \-\-wait\-trigger \-\-triggers 1=1,2=r,3=0,4=1 " .SH "EXIT STATUS" .B sigrok\-cli