From: Uwe Hermann <redacted>
Date: Fri, 13 Jan 2012 21:22:55 +0000 (+0100)
Subject: Add a JTAG dump of an STM32 being flashed.
X-Git-Tag: sigrok-dumps-0.1.0~32
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=80b6876c42831d20107d7d488beb389f8e0d3fe4;p=libsigrokdecode.git

Add a JTAG dump of an STM32 being flashed.
---

diff --git a/jtag/olimex_stm32-h103/README b/jtag/olimex_stm32-h103/README
new file mode 100644
index 0000000..58093e2
--- /dev/null
+++ b/jtag/olimex_stm32-h103/README
@@ -0,0 +1,60 @@
+-------------------------------------------------------------------------------
+JTAG
+-------------------------------------------------------------------------------
+
+This is a set of example captures of JTAG communication to an Olimex
+STM32-H103 eval board with an ST STM32 (ARM Cortex-M3) microcontroller.
+
+The JTAG adapter used was the FTDI FT2232H based Floss-JTAG (V0.2).
+
+The firmware flashed to the board is a simple LED-blinking libopencm3
+example named 'fancyblink'. The respective fancyblink.bin file is
+available as a reference in the same directory as this README.
+The file's MD5 sum is aa6980d55b9ced84fc0c64bfe9e5ff98.
+
+Details:
+http://olimex.com/dev/stm32-h103.html
+http://randomprojects.org/wiki/Floss-JTAG
+http://libopencm3.org
+http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/stm32-h103/fancyblink
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used for capturing was a Saleae Logic:
+
+  Probe       STM32-H103 JTAG connector
+  -------------------------------------
+  1 (black)   TRST
+  2 (brown)   TDI
+  3 (red)     TMS
+  4 (orange)  TCK
+  5 (yellow)  TDO
+  6 (green)   RST
+
+
+JTAG/OpenOCD setup
+------------------
+
+The OpenOCD used was "0.5.0 (2011-08-09-08:45)" (Debian version 0.5.0-1).
+
+It was invoked like this:
+
+  openocd -f interface/flossjtag-noeeprom.cfg \
+          -f board/olimex_stm32_h107.cfg \
+          -c "init" -c "reset init" \
+          -c "stm32f1x mass_erase 0" \
+          -c "flash write_image fancyblink.bin" \
+          -c "reset" \
+          -c "shutdown"
+
+sigrok setup
+------------
+
+The sigrok command line used was:
+
+  sigrok-cli -d 0:samplerate=4mhz --time 20s \
+             -p '1=TRST,2=TDI,3=TMS,4=TCK,5=TDO,6=RST' \
+             -o olimex_stm32-h103_flash_fancyblink.sr
+
diff --git a/jtag/olimex_stm32-h103/fancyblink.bin b/jtag/olimex_stm32-h103/fancyblink.bin
new file mode 100644
index 0000000..4d12a9e
Binary files /dev/null and b/jtag/olimex_stm32-h103/fancyblink.bin differ
diff --git a/jtag/olimex_stm32-h103/olimex_stm32-h103_flash_fancyblink.sr b/jtag/olimex_stm32-h103/olimex_stm32-h103_flash_fancyblink.sr
new file mode 100644
index 0000000..12d86af
Binary files /dev/null and b/jtag/olimex_stm32-h103/olimex_stm32-h103_flash_fancyblink.sr differ