From: Aurelien Jacobs <redacted>
Date: Sun, 13 Oct 2013 19:33:49 +0000 (+0200)
Subject: add dump from cyrustek es51978
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=79edccdcf8920b0993c5bf55489f46715486e894;p=sigrok-dumps.git

add dump from cyrustek es51978
---

diff --git a/uart/cyrustek_es51978/README b/uart/cyrustek_es51978/README
new file mode 100644
index 0000000..a10c8fd
--- /dev/null
+++ b/uart/cyrustek_es51978/README
@@ -0,0 +1,34 @@
+-------------------------------------------------------------------------------
+ES51978 based multimeter, serial communication
+-------------------------------------------------------------------------------
+
+This is a set of example captures of the serial (UART) communication and
+its timings on an optical RS232 cable for the ISO-TECH IDM103N digital
+multimeter based on the Cyrustek ES51978 chip.
+
+The UART parameters are 2400 baud, with 7e1 settings.
+
+Details:
+http://www.cyrustek.com.tw/spec/ES51978.pdf
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was an OpenBench Logic Sniffer :
+
+  Probe       RS232 Cable
+  -------------------------
+  0           RX
+
+
+Data
+----
+
+Contains 3 samples sent by the multimeter set in resistance mode, mesuring
+skin resistance, a few Mega Ohm.
+
+The sigrok command line used was:
+
+  sigrok-cli -d ols:conn=/dev/ttyACM0 -c samplerate=100khz:rle=1 \
+             -p 0=RX -t RX=0 -o es51978.sr --samples=245760
diff --git a/uart/cyrustek_es51978/es51978.sr b/uart/cyrustek_es51978/es51978.sr
new file mode 100644
index 0000000..9060dcf
Binary files /dev/null and b/uart/cyrustek_es51978/es51978.sr differ