From: Antti Nykanen <redacted>
Date: Sun, 24 Aug 2014 09:03:15 +0000 (+0300)
Subject: libserialport.h.in: remove trailing commas in enum definitions
X-Git-Tag: libserialport-0.1.1~111
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=79a800463795e4114bc2f8d719c7f6d0cab49164;p=libserialport.git

libserialport.h.in: remove trailing commas in enum definitions

This makes it easier to use libserialport on projects that build with
the GCC -pedantic flag enabled.
---

diff --git a/libserialport.h.in b/libserialport.h.in
index 6fb9b17..51d9afe 100644
--- a/libserialport.h.in
+++ b/libserialport.h.in
@@ -100,7 +100,7 @@ enum sp_return {
 	/** A memory allocation failed while executing the operation. */
 	SP_ERR_MEM = -3,
 	/** The requested operation is not supported by this system or device. */
-	SP_ERR_SUPP = -4,
+	SP_ERR_SUPP = -4
 };
 
 /** Port access modes. */
@@ -108,7 +108,7 @@ enum sp_mode {
 	/** Open port for read access. */
 	SP_MODE_READ = 1,
 	/** Open port for write access. */
-	SP_MODE_WRITE = 2,
+	SP_MODE_WRITE = 2
 };
 
 /** Port events. */
@@ -118,7 +118,7 @@ enum sp_event {
 	/* Ready to transmit new data. */
 	SP_EVENT_TX_READY = 2,
 	/* Error occured. */
-	SP_EVENT_ERROR = 4,
+	SP_EVENT_ERROR = 4
 };
 
 /** Buffer selection. */
@@ -128,7 +128,7 @@ enum sp_buffer {
 	/** Output buffer. */
 	SP_BUF_OUTPUT = 2,
 	/** Both buffers. */
-	SP_BUF_BOTH = 3,
+	SP_BUF_BOTH = 3
 };
 
 /** Parity settings. */
@@ -144,7 +144,7 @@ enum sp_parity {
 	/** Mark parity. */
 	SP_PARITY_MARK = 3,
 	/** Space parity. */
-	SP_PARITY_SPACE = 4,
+	SP_PARITY_SPACE = 4
 };
 
 /** RTS pin behaviour. */
@@ -156,7 +156,7 @@ enum sp_rts {
 	/** RTS on. */
 	SP_RTS_ON = 1,
 	/** RTS used for flow control. */
-	SP_RTS_FLOW_CONTROL = 2,
+	SP_RTS_FLOW_CONTROL = 2
 };
 
 /** CTS pin behaviour. */
@@ -166,7 +166,7 @@ enum sp_cts {
 	/** CTS ignored. */
 	SP_CTS_IGNORE = 0,
 	/** CTS used for flow control. */
-	SP_CTS_FLOW_CONTROL = 1,
+	SP_CTS_FLOW_CONTROL = 1
 };
 
 /** DTR pin behaviour. */
@@ -178,7 +178,7 @@ enum sp_dtr {
 	/** DTR on. */
 	SP_DTR_ON = 1,
 	/** DTR used for flow control. */
-	SP_DTR_FLOW_CONTROL = 2,
+	SP_DTR_FLOW_CONTROL = 2
 };
 
 /** DSR pin behaviour. */
@@ -188,7 +188,7 @@ enum sp_dsr {
 	/** DSR ignored. */
 	SP_DSR_IGNORE = 0,
 	/** DSR used for flow control. */
-	SP_DSR_FLOW_CONTROL = 1,
+	SP_DSR_FLOW_CONTROL = 1
 };
 
 /** XON/XOFF flow control behaviour. */
@@ -202,7 +202,7 @@ enum sp_xonxoff {
 	/** XON/XOFF enabled for output only. */
 	SP_XONXOFF_OUT = 2,
 	/** XON/XOFF enabled for input and output. */
-	SP_XONXOFF_INOUT = 3,
+	SP_XONXOFF_INOUT = 3
 };
 
 /** Standard flow control combinations. */
@@ -214,7 +214,7 @@ enum sp_flowcontrol {
 	/** Hardware flow control using RTS/CTS signals. */
 	SP_FLOWCONTROL_RTSCTS = 2,
 	/** Hardware flow control using DTR/DSR signals. */
-	SP_FLOWCONTROL_DTRDSR = 3,
+	SP_FLOWCONTROL_DTRDSR = 3
 };
 
 /** Input signals. */
@@ -226,7 +226,7 @@ enum sp_signal {
 	/** Data carrier detect. */
 	SP_SIG_DCD = 4,
 	/** Ring indicator. */
-	SP_SIG_RI = 8,
+	SP_SIG_RI = 8
 };
 
 /** Transport types. */
@@ -236,7 +236,7 @@ enum sp_transport {
 	/** USB serial port adapter. */
 	SP_TRANSPORT_USB,
 	/** Bluetooh serial port adapter. */
-	SP_TRANSPORT_BLUETOOTH,
+	SP_TRANSPORT_BLUETOOTH
 };
 
 /**