From: Uwe Hermann <redacted>
Date: Tue, 12 Jun 2012 18:38:08 +0000 (+0200)
Subject: srd: Cosmetics.
X-Git-Tag: libsigrokdecode-0.1.1~85
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=71077f34ffbd7d4015886a229edb2f2f827cb442;p=libsigrokdecode.git

srd: Cosmetics.
---

diff --git a/decoders/edid/__init__.py b/decoders/edid/__init__.py
index 9932a81..0987d17 100644
--- a/decoders/edid/__init__.py
+++ b/decoders/edid/__init__.py
@@ -25,7 +25,7 @@ The three-character vendor ID as specified in the EDID standard refers to
 a Plug and Play ID (PNPID). The list of PNPID assignments is done by Microsoft.
 More information is available on this page:
 
-  http://msdn.microsoft.com/en-us/windows/hardware/gg463195
+ http://msdn.microsoft.com/en-us/windows/hardware/gg463195
 
 The 'pnpids.txt' file included with this protocol decoder is derived from
 the list of assignments downloadable from that page. It was retrieved in
@@ -33,7 +33,7 @@ January 2012.
 
 More information on EDID is available here:
 
-  https://en.wikipedia.org/wiki/Extended_display_identification_data
+ https://en.wikipedia.org/wiki/Extended_display_identification_data
 '''
 
 from .edid import *
diff --git a/decoders/i2c/__init__.py b/decoders/i2c/__init__.py
index 5216e01..14262d1 100644
--- a/decoders/i2c/__init__.py
+++ b/decoders/i2c/__init__.py
@@ -62,15 +62,15 @@ I2C packet:
 [<cmd>, <data>]
 
 <cmd> is one of:
-  - 'START' (START condition)
-  - 'START REPEAT' (Repeated START condition)
-  - 'ADDRESS READ' (Slave address, read)
-  - 'ADDRESS WRITE' (Slave address, write)
-  - 'DATA READ' (Data, read)
-  - 'DATA WRITE' (Data, write)
-  - 'STOP' (STOP condition)
-  - 'ACK' (ACK bit)
-  - 'NACK' (NACK bit)
+ - 'START' (START condition)
+ - 'START REPEAT' (Repeated START condition)
+ - 'ADDRESS READ' (Slave address, read)
+ - 'ADDRESS WRITE' (Slave address, write)
+ - 'DATA READ' (Data, read)
+ - 'DATA WRITE' (Data, write)
+ - 'STOP' (STOP condition)
+ - 'ACK' (ACK bit)
+ - 'NACK' (NACK bit)
 
 <data> is the data or address byte associated with the 'ADDRESS*' and 'DATA*'
 command. Slave addresses do not include bit 0 (the READ/WRITE indication bit).
diff --git a/decoders/jtag/__init__.py b/decoders/jtag/__init__.py
index 79fc6c1..4a53502 100644
--- a/decoders/jtag/__init__.py
+++ b/decoders/jtag/__init__.py
@@ -33,16 +33,16 @@ JTAG packet:
 [<packet-type>, <data>]
 
 <packet-type> is one of:
-  - 'NEW STATE': <data> is the new state of the JTAG state machine.
-    Valid values: 'TEST-LOGIC-RESET', 'RUN-TEST/IDLE', 'SELECT-DR-SCAN',
-    'CAPTURE-DR', 'SHIFT-DR', 'EXIT1-DR', 'PAUSE-DR', 'EXIT2-DR', 'UPDATE-DR',
-    'SELECT-IR-SCAN', 'CAPTURE-IR', 'SHIFT-IR', 'EXIT1-IR', 'PAUSE-IR',
-    'EXIT2-IR', 'UPDATE-IR'.
-  - 'IR TDI': Bitstring that was clocked into the IR register.
-  - 'IR TDO': Bitstring that was clocked out of the IR register.
-  - 'DR TDI': Bitstring that was clocked into the DR register.
-  - 'DR TDO': Bitstring that was clocked out of the DR register.
-  - ...
+ - 'NEW STATE': <data> is the new state of the JTAG state machine.
+   Valid values: 'TEST-LOGIC-RESET', 'RUN-TEST/IDLE', 'SELECT-DR-SCAN',
+   'CAPTURE-DR', 'SHIFT-DR', 'EXIT1-DR', 'PAUSE-DR', 'EXIT2-DR', 'UPDATE-DR',
+   'SELECT-IR-SCAN', 'CAPTURE-IR', 'SHIFT-IR', 'EXIT1-IR', 'PAUSE-IR',
+   'EXIT2-IR', 'UPDATE-IR'.
+ - 'IR TDI': Bitstring that was clocked into the IR register.
+ - 'IR TDO': Bitstring that was clocked out of the IR register.
+ - 'DR TDI': Bitstring that was clocked into the DR register.
+ - 'DR TDO': Bitstring that was clocked out of the DR register.
+ - ...
 
 All bitstrings are a sequence of '1' and '0' characters. The right-most
 character in the bitstring is the LSB. Example: '01110001' (1 is LSB).
diff --git a/decoders/spi/__init__.py b/decoders/spi/__init__.py
index 8734acf..fedcc5f 100644
--- a/decoders/spi/__init__.py
+++ b/decoders/spi/__init__.py
@@ -36,11 +36,12 @@ Commands:
  - 'CS CHANGE': <data1> is the old CS# pin value, <data2> is the new value.
    Both data items are Python numbers (0/1), not strings.
 
-Example:
+Examples:
  ['CS-CHANGE', 1, 0]
  ['DATA', 0xff, 0x3a]
  ['DATA', 0x65, 0x00]
  ['CS-CHANGE', 0, 1]
+
 '''
 
 from .spi import *
diff --git a/decoders/uart/__init__.py b/decoders/uart/__init__.py
index d41a964..ecba2e1 100644
--- a/decoders/uart/__init__.py
+++ b/decoders/uart/__init__.py
@@ -96,7 +96,7 @@ Protocol output format:
 UART packet:
 [<packet-type>, <rxtx>, <packet-data>]
 
-This is the list of <packet-types>s and their respective <packet-data>:
+This is the list of <packet-type>s and their respective <packet-data>:
  - 'STARTBIT': The data is the (integer) value of the start bit (0/1).
  - 'DATA': The data is the (integer) value of the UART data. Valid values
    range from 0 to 512 (as the data can be up to 9 bits in size).
diff --git a/decoders/usb/__init__.py b/decoders/usb/__init__.py
index 77b58d1..a7204db 100644
--- a/decoders/usb/__init__.py
+++ b/decoders/usb/__init__.py
@@ -35,6 +35,9 @@ transition. This is known as bit stuffing. Data is transferred at a rate
 of 12Mbit/s. The SE0 transmitted to signal an end-of-packet is two bit
 intervals long.
 
+Protocol output format:
+TODO
+
 Details:
 https://en.wikipedia.org/wiki/USB
 http://www.usb.org/developers/docs/