From: Uwe Hermann Date: Sat, 28 Apr 2012 17:24:57 +0000 (+0200) Subject: srd: Add initial JTAG/STM32 protocol decoder. X-Git-Tag: libsigrokdecode-0.1.1~129 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=66a8517ecfea370741c5789d664c9a965b5c0bc2;p=libsigrokdecode.git srd: Add initial JTAG/STM32 protocol decoder. (not yet finished) This protocol decoder can decode ST STM32 specific JTAG accesses, knows about the STM32-specific registers and bits. --- diff --git a/configure.ac b/configure.ac index 2e491ab..0d7f710 100644 --- a/configure.ac +++ b/configure.ac @@ -154,6 +154,7 @@ AC_CONFIG_FILES([Makefile decoders/i2cfilter/Makefile decoders/i2s/Makefile decoders/jtag/Makefile + decoders/jtag_stm32/Makefile decoders/lpc/Makefile decoders/mlx90614/Makefile decoders/mx25lxx05d/Makefile diff --git a/decoders/Makefile.am b/decoders/Makefile.am index afe8ede..0256d16 100644 --- a/decoders/Makefile.am +++ b/decoders/Makefile.am @@ -27,6 +27,7 @@ SUBDIRS = \ i2cfilter \ i2s \ jtag \ + jtag_stm32 \ lpc \ mlx90614 \ mx25lxx05d \ diff --git a/decoders/jtag_stm32/Makefile.am b/decoders/jtag_stm32/Makefile.am new file mode 100644 index 0000000..08d74d6 --- /dev/null +++ b/decoders/jtag_stm32/Makefile.am @@ -0,0 +1,26 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +pkgdatadir = $(DECODERS_DIR)/jtag_stm32 + +dist_pkgdata_DATA = __init__.py jtag_stm32.py + +CLEANFILES = *.pyc + diff --git a/decoders/jtag_stm32/__init__.py b/decoders/jtag_stm32/__init__.py new file mode 100644 index 0000000..bc35c46 --- /dev/null +++ b/decoders/jtag_stm32/__init__.py @@ -0,0 +1,32 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +ST STM32 JTAG protocol decoder. + +TODO. + +Details: +https://en.wikipedia.org/wiki/STM32 +http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/REFERENCE_MANUAL/CD00171190.pdf (e.g. chapter 31.7: "JTAG debug port") +''' + +from .jtag_stm32 import * + diff --git a/decoders/jtag_stm32/jtag_stm32.py b/decoders/jtag_stm32/jtag_stm32.py new file mode 100644 index 0000000..1677a93 --- /dev/null +++ b/decoders/jtag_stm32/jtag_stm32.py @@ -0,0 +1,146 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# ST STM32 JTAG protocol decoder + +import sigrokdecode as srd + +# JTAG debug port data registers (in IR[3:0]) and their sizes (in bits) +ir = { + '1111': ['BYPASS', 1], # Bypass register + '1110': ['IDCODE', 32], # ID code register + '1010': ['DPACC', 35], # Debug port access register + '1011': ['APACC', 35], # Access port access register + '1000': ['ABORT', 35], # Abort register +} + +# ARM Cortex-M3 r1p1-01rel0 ID code +cm3_idcode = 0x3ba00477 + +# JTAG ID code in the STM32F10xxx BSC (boundary scan) TAP +jtag_idcode = { + 0x06412041: 'Low-density device, rev. A', + 0x06410041: 'Medium-density device, rev. A', + 0x16410041: 'Medium-density device, rev. B/Z/Y', + 0x06414041: 'High-density device, rev. A/Z/Y', + 0x06430041: 'XL-density device, rev. A', + 0x06418041: 'Connectivity-line device, rev. A/Z', +} + +# ACK[2:0] in the DPACC/APACC registers +ack_val = { + '000': 'Reserved', + '001': 'WAIT', + '010': 'OK/FAULT', + '011': 'Reserved', + '100': 'Reserved', + '101': 'Reserved', + '110': 'Reserved', + '111': 'Reserved', +} + +# 32bit debug port registers (addressed via A[3:2]) +reg = { + '00': 'Reserved', # Must be kept at reset value + '01': 'DP CTRL/STAT', + '10': 'DP SELECT', + '11': 'DP RDBUFF', +} + +class Decoder(srd.Decoder): + api_version = 1 + id = 'jtag_stm32' + name = 'JTAG / STM32' + longname = 'Joint Test Action Group / ST STM32' + desc = 'ST STM32-specific JTAG protocol.' + license = 'gplv2+' + inputs = ['jtag'] + outputs = ['jtag_stm32'] + probes = [] + optional_probes = [] + options = {} + annotations = [ + ['ASCII', 'TODO: description'], + ] + + def __init__(self, **kwargs): + self.state = 'IDLE' + + def start(self, metadata): + # self.out_proto = self.add(srd.OUTPUT_PROTO, 'jtag_stm32') + self.out_ann = self.add(srd.OUTPUT_ANN, 'jtag_stm32') + + def report(self): + pass + + def handle_reg_bypass(self, bits): + # TODO + pass + + def handle_reg_idcode(self, bits): + # TODO + pass + + # When transferring data IN: + # Bits[34:3] = DATA[31:0]: 32bit data to transfer (write request) + # Bits[2:1] = A[3:2]: 2-bit address of a debug port register + # Bits[0:0] = RnW: Read request (1) or write request (0) + # When transferring data OUT: + # Bits[34:3] = DATA[31:0]: 32bit data which is read (read request) + # Bits[2:0] = ACK[2:0]: 3-bit acknowledge + def handle_reg_dpacc(self, bits): + self.put(self.ss, self.es, self.out_ann, [0, ['bits: ' + bits]]) + + # Data IN + data, a, rnw = bits[:-3], bits[-4:-1], bits[-1] + r = 'Read request' if (rnw == '1') else 'Write request' + s = 'DATA: %s, A: %s, RnW: %s' % (data, ack_val[a], r) + self.put(self.ss, self.es, self.out_ann, [0, [s]]) + + # Data OUT + # data, ack = bits[:-3], bits[-3:] + # ack_meaning = ack_val[ack] + # s = 'DATA: %s, ACK: %s' % (data, ack_meaning) + # self.put(self.ss, self.es, self.out_ann, [0, [s]]) + + def handle_reg_apacc(self, bits): + # TODO + pass + + def handle_reg_abort(self, bits): + # Bits[31:1]: reserved. Bit[0]: DAPABORT. + a = '' if (bits[0] == '1') else 'No ' + s = 'DAPABORT = %s: %sDAP abort generated' % (bits[0], a) + self.put(self.ss, self.es, self.out_ann, [0, [s]]) + + if (bits[:-1] != ('0' * 31)): + pass # TODO: Error + + def decode(self, ss, es, data): + # Assumption: The right-most char in the 'val' bitstring is the LSB. + cmd, val = data + + self.ss, self.es = ss, es + + self.put(self.ss, self.es, self.out_ann, [0, [cmd + ' / ' + val]]) + + # State machine + # TODO +