From: Mariusz Bialonczyk <redacted>
Date: Fri, 22 Mar 2019 06:45:55 +0000 (+0100)
Subject: onewire/ds2408: add dumps and README
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=3ccaa3160ae2dd88944351eb945dae0b049beb3a;p=sigrok-dumps.git

onewire/ds2408: add dumps and README
---

diff --git a/onewire/ds2408/README b/onewire/ds2408/README
new file mode 100644
index 0000000..785f273
--- /dev/null
+++ b/onewire/ds2408/README
@@ -0,0 +1,49 @@
+-------------------------------------------------------------------------------
+Maxim DS2408 1-Wire 8-Channel Addressable Switch
+-------------------------------------------------------------------------------
+
+This is a set of example captures of the 1-Wire traffic from a Maxim Integrated
+(previously Dallas Semiconductor) DS2408 1-Wire Addressable Switch.
+
+Details:
+https://datasheets.maximintegrated.com/en/ds/DS2408.pdf
+
+
+Logic analyzer setup
+--------------------
+
+The waveform data was acquired using Rigol DS1074Z oscilloscope.
+
+Because of the currently unresolved libsigrok bug #1364 it can't be acquired
+directly using rigol-ds, so it was obtained using external tool and then
+loaded into PulseView with "Import Raw analog data without header".
+
+This method is described here:
+https://skyboo.net/2019/03/using-rigol-ds1074z-oscilloscope-under-linux-and-pulseview/
+
+
+disable-test-mode.sr
+--------------------
+
+This is the special "Disable Test Mode" command which should be issued on the
+power-on, for reference read "Power-up timing", page 38 of the datasheet.
+
+
+channel-access-write.sr
+-----------------------
+
+A successful command for setting PIO outputs (channel access write).
+
+
+channel-access-write-fail.sr
+----------------------------
+
+Same command as above but the device is responding with 'Fail New State' (0xff)
+which informs about the error.
+
+
+read-pio-registers.sr
+---------------------
+
+A function for reading device registers (where a target address is given).
+In this example the address 0x89 is read (PIO output-latch state register).
diff --git a/onewire/ds2408/channel-access-write-fail.sr b/onewire/ds2408/channel-access-write-fail.sr
new file mode 100644
index 0000000..a0090ad
Binary files /dev/null and b/onewire/ds2408/channel-access-write-fail.sr differ
diff --git a/onewire/ds2408/channel-access-write.sr b/onewire/ds2408/channel-access-write.sr
new file mode 100644
index 0000000..ac407e3
Binary files /dev/null and b/onewire/ds2408/channel-access-write.sr differ
diff --git a/onewire/ds2408/disable-test-mode.sr b/onewire/ds2408/disable-test-mode.sr
new file mode 100644
index 0000000..e51e69a
Binary files /dev/null and b/onewire/ds2408/disable-test-mode.sr differ
diff --git a/onewire/ds2408/read-pio-registers.sr b/onewire/ds2408/read-pio-registers.sr
new file mode 100644
index 0000000..13f238b
Binary files /dev/null and b/onewire/ds2408/read-pio-registers.sr differ