From: Uwe Hermann Date: Thu, 26 Jul 2012 16:55:02 +0000 (+0200) Subject: srd: Initial decoder for AVR ISP protocol. X-Git-Tag: libsigrokdecode-0.1.1~35 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=3bd76451f01dface8df58828a2bbc242d3391db9;p=libsigrokdecode.git srd: Initial decoder for AVR ISP protocol. --- diff --git a/configure.ac b/configure.ac index c999efd..bbbb627 100644 --- a/configure.ac +++ b/configure.ac @@ -148,6 +148,7 @@ AC_CONFIG_FILES([Makefile sigrokdecode.h libsigrokdecode.pc decoders/Makefile + decoders/avr_isp/Makefile decoders/dcf77/Makefile decoders/edid/Makefile decoders/i2c/Makefile diff --git a/decoders/Makefile.am b/decoders/Makefile.am index 1646a1b..f8e7f61 100644 --- a/decoders/Makefile.am +++ b/decoders/Makefile.am @@ -20,6 +20,7 @@ # Please keep this list in alphabetical order. SUBDIRS = \ + avr_isp \ dcf77 \ edid \ i2c \ diff --git a/decoders/avr_isp/Makefile.am b/decoders/avr_isp/Makefile.am new file mode 100644 index 0000000..7960b11 --- /dev/null +++ b/decoders/avr_isp/Makefile.am @@ -0,0 +1,26 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +pkgdatadir = $(DECODERS_DIR)/avr_isp + +dist_pkgdata_DATA = __init__.py pd.py + +CLEANFILES = *.pyc + diff --git a/decoders/avr_isp/__init__.py b/decoders/avr_isp/__init__.py new file mode 100644 index 0000000..f3eddd5 --- /dev/null +++ b/decoders/avr_isp/__init__.py @@ -0,0 +1,33 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +AVR ISP protocol decoder. + +TODO: Description. + +TODO: SPI is MSB-first. + +Details: +TODO +''' + +from .pd import * + diff --git a/decoders/avr_isp/pd.py b/decoders/avr_isp/pd.py new file mode 100644 index 0000000..be6c190 --- /dev/null +++ b/decoders/avr_isp/pd.py @@ -0,0 +1,215 @@ +## +## This file is part of the sigrok project. +## +## Copyright (C) 2012 Uwe Hermann +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +# AVR ISP protocol decoder + +import sigrokdecode as srd + +# Device code addresses: +# 0x00: vendor code, 0x01: part family + flash size, 0x02: part number + +# Vendor code +vendor_code = { + 0x1e: 'Atmel', + 0x00: 'Device locked', +} + +# (Part family + flash size, part number) +part = { + (0x90, 0x01): 'AT90S1200', + (0x91, 0x01): 'AT90S2313', + (0x92, 0x01): 'AT90S4414', + (0x92, 0x05): 'ATmega48', # 4kB flash + (0x93, 0x01): 'AT90S8515', + (0x93, 0x0a): 'ATmega88', # 8kB flash + (0x94, 0x06): 'ATmega168', # 16kB flash + (0xff, 0xff): 'Device code erased, or target missing', + (0x01, 0x02): 'Device locked', + # TODO: Lots more entries. +} + +VENDOR_CODE_ATMEL = 0x1e + +class Decoder(srd.Decoder): + api_version = 1 + id = 'avr_isp' + name = 'AVR ISP' + longname = 'AVR in-system programming' + desc = 'Protocol for in-system programming Atmel AVR MCUs.' + license = 'gplv2+' + inputs = ['spi', 'logic'] + outputs = ['avr_isp'] + probes = [] + optional_probes = [ + {'id': 'reset', 'name': 'RESET#', 'desc': 'Target AVR MCU reset'}, + ] + options = {} + annotations = [ + ['Text', 'Human-readable text'], + ['Warnings', 'Human-readable warnings'], + ] + + def __init__(self, **kwargs): + self.state = 'IDLE' + self.mosi_bytes, self.miso_bytes = [], [] + self.cmd_ss, self.cmd_es = 0, 0 + self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0 + + def start(self, metadata): + # self.out_proto = self.add(srd.OUTPUT_PROTO, 'avr_isp') + self.out_ann = self.add(srd.OUTPUT_ANN, 'avr_isp') + + def report(self): + pass + + def putx(self, data): + self.put(self.cmd_ss, self.cmd_es, self.out_ann, data) + + def handle_cmd_programming_enable(self, cmd, ret): + # Programming enable. + # Note: The chip doesn't send any ACK for 'Programming enable'. + self.putx([0, ['Programming enable']]) + + # Sanity check on reply. + if ret[1:4] != [0xac, 0x53, cmd[2]]: + self.putx([1, ['Warning: Unexpected bytes in reply!']]) + + def handle_cmd_read_signature_byte_0x00(self, cmd, ret): + # Signature byte 0x00: vendor code. + self.vendor_code = ret[3] + v = vendor_code[self.vendor_code] + self.putx([0, ['Vendor code: 0x%02x (%s)' % (ret[3], v)]]) + + # Store for later. + self.xx = cmd[1] # Same as ret[2]. + self.yy = cmd[3] + self.zz = ret[0] + + # Sanity check on reply. + if ret[1] != 0x30 or ret[2] != cmd[1]: + self.putx([1, ['Warning: Unexpected bytes in reply!']]) + + # Sanity check for the vendor code. + if self.vendor_code != VENDOR_CODE_ATMEL: + self.putx([1, ['Warning: Vendor code was not 0x1e (Atmel)!']]) + + def handle_cmd_read_signature_byte_0x01(self, cmd, ret): + # Signature byte 0x01: part family and memory size. + self.part_fam_flash_size = ret[3] + self.putx([0, ['Part family / memory size: 0x%02x' % ret[3]]]) + + # Store for later. + self.mm = cmd[3] + + # Sanity check on reply. + if ret[1] != 0x30 or ret[2] != cmd[1] or ret[0] != self.yy: + self.putx([1, ['Warning: Unexpected bytes in reply!']]) + + def handle_cmd_read_signature_byte_0x02(self, cmd, ret): + # Signature byte 0x02: part number. + self.part_number = ret[3] + self.putx([0, ['Part number: 0x%02x' % ret[3]]]) + + # TODO: Fix range. + p = part[(self.part_fam_flash_size, self.part_number)] + self.putx([0, ['Device: Atmel %s' % p]]) + + # Sanity check on reply. + if ret[1] != 0x30 or ret[2] != self.xx or ret[0] != self.mm: + self.putx([1, ['Warning: Unexpected bytes in reply!']]) + + self.xx, self.yy, self.zz, self.mm = 0, 0, 0, 0 + + def handle_cmd_chip_erase(self, cmd, ret): + # TODO + self.putx([0, ['Chip erase']]) + + def handle_cmd_read_fuse_bits(self, cmd, ret): + # Read fuse bits. + self.putx([0, ['Read fuse bits: 0x%02x' % ret[3]]]) + + # TODO: Decode fuse bits. + # TODO: Sanity check on reply. + + def handle_cmd_read_fuse_high_bits(self, cmd, ret): + # Read fuse high bits. + self.putx([0, ['Read fuse high bits: 0x%02x' % ret[3]]]) + + # TODO: Decode fuse bits. + # TODO: Sanity check on reply. + + def handle_cmd_read_extended_fuse_bits(self, cmd, ret): + # Read extended fuse bits. + self.putx([0, ['Read extended fuse bits: 0x%02x' % ret[3]]]) + + # TODO: Decode fuse bits. + # TODO: Sanity check on reply. + + def handle_command(self, cmd, ret): + if cmd[:2] == [0xac, 0x53]: + self.handle_cmd_programming_enable(cmd, ret) + elif cmd[0] == 0xac and (cmd[1] & (1 << 7)) == (1 << 7): + self.handle_cmd_chip_erase(cmd, ret) + elif cmd[:3] == [0x50, 0x00, 0x00]: + self.handle_cmd_read_fuse_bits(cmd, ret) + elif cmd[:3] == [0x58, 0x08, 0x00]: + self.handle_cmd_read_fuse_high_bits(cmd, ret) + elif cmd[:3] == [0x50, 0x08, 0x00]: + self.handle_cmd_read_extended_fuse_bits(cmd, ret) + elif cmd[0] == 0x30 and cmd[2] == 0x00: + self.handle_cmd_read_signature_byte_0x00(cmd, ret) + elif cmd[0] == 0x30 and cmd[2] == 0x01: + self.handle_cmd_read_signature_byte_0x01(cmd, ret) + elif cmd[0] == 0x30 and cmd[2] == 0x02: + self.handle_cmd_read_signature_byte_0x02(cmd, ret) + else: + c = '%02x %02x %02x %02x' % tuple(cmd) + r = '%02x %02x %02x %02x' % tuple(ret) + self.putx([0, ['Unknown command: %s (reply: %s)!' % (c, r)]]) + + def decode(self, ss, es, data): + ptype, mosi, miso = data + + if ptype != 'DATA': + return + + # self.put(0, 0, self.out_ann, + # [0, ['MOSI: 0x%02x, MISO: 0x%02x' % (mosi, miso)]]) + + self.ss, self.es = ss, es + + # Append new bytes. + self.mosi_bytes.append(mosi) + self.miso_bytes.append(miso) + + if len(self.mosi_bytes) == 0: + self.cmd_ss = ss + + # All commands consist of 4 bytes. + if len(self.mosi_bytes) < 4: + return + + self.cmd_es = es + + self.handle_command(self.mosi_bytes, self.miso_bytes) + + self.mosi_bytes = [] + self.miso_bytes = [] +