From: Gerhard Sittig <redacted>
Date: Sun, 16 Oct 2016 16:25:18 +0000 (+0200)
Subject: asix-sigma: update comments in firmware download code paths
X-Git-Tag: libsigrok-0.5.0~210
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=387825dcb1d3ee3fa39286d6048e7bfe86a310b6;p=libsigrok.git

asix-sigma: update comments in firmware download code paths

The current implementation of the ASIX Sigma firmware download contains
comments which express uncertainty. Rephrase them, no magic is involved.

Discuss the polarity of the CCLK hardware signal. Which shall eliminate
potential concerns in future reviews or maintenance.

This commit only updates comments, and does not change behaviour.

Signed-off-by: Gerhard Sittig <redacted>
---

diff --git a/src/hardware/asix-sigma/protocol.c b/src/hardware/asix-sigma/protocol.c
index 5fa7b2d0..f17a9623 100644
--- a/src/hardware/asix-sigma/protocol.c
+++ b/src/hardware/asix-sigma/protocol.c
@@ -388,12 +388,13 @@ static int sigma_fw_2_bitbang(struct sr_context *ctx, const char *name,
 	int bit, v;
 	int ret = SR_OK;
 
+	/* Retrieve the on-disk firmware file content. */
 	firmware = sr_resource_load(ctx, SR_RESOURCE_FIRMWARE,
 			name, &file_size, 256 * 1024);
 	if (!firmware)
 		return SR_ERR;
 
-	/* Weird magic transformation below, I have no idea what it does. */
+	/* Unscramble the file content (XOR with "random" sequence). */
 	imm = 0x3f6df2ab;
 	for (i = 0; i < file_size; i++) {
 		imm = (imm + 0xa853753) % 177 + (imm * 0x8034052);
@@ -401,13 +402,20 @@ static int sigma_fw_2_bitbang(struct sr_context *ctx, const char *name,
 	}
 
 	/*
-	 * Now that the firmware is "transformed", we will transcribe the
-	 * firmware blob into a sequence of toggles of the Dx wires. This
-	 * sequence will be fed directly into the Sigma, which must be in
-	 * the FPGA bitbang programming mode.
+	 * Generate a sequence of bitbang samples. With two samples per
+	 * FPGA configuration bit, providing the level for the DIN signal
+	 * as well as two edges for CCLK. See Xilinx UG332 for details
+	 * ("slave serial" mode).
+	 *
+	 * Note that CCLK is inverted in hardware. That's why the
+	 * respective bit is first set and then cleared in the bitbang
+	 * sample sets. So that the DIN level will be stable when the
+	 * data gets sampled at the rising CCLK edge, and the signals'
+	 * setup time constraint will be met.
+	 *
+	 * The caller will put the FPGA into download mode, will send
+	 * the bitbang samples, and release the allocated memory.
 	 */
-
-	/* Each bit of firmware is transcribed as two toggles of Dx wires. */
 	bb_size = file_size * 8 * 2;
 	bb_stream = (uint8_t *)g_try_malloc(bb_size);
 	if (!bb_stream) {
@@ -415,7 +423,6 @@ static int sigma_fw_2_bitbang(struct sr_context *ctx, const char *name,
 		ret = SR_ERR_MALLOC;
 		goto exit;
 	}
-
 	bbs = bb_stream;
 	for (i = 0; i < file_size; i++) {
 		for (bit = 7; bit >= 0; bit--) {