From: Jorge Solla Date: Tue, 7 Apr 2020 21:37:13 +0000 (+0200) Subject: Add decoder for Nordic Semiconductor nRF905 chip X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=3801453ccc140b17e78079e9b9cc6cd8a01322f6;p=libsigrokdecode.git Add decoder for Nordic Semiconductor nRF905 chip --- diff --git a/decoders/nrf905/__init__.py b/decoders/nrf905/__init__.py new file mode 100644 index 0000000..c6d35ab --- /dev/null +++ b/decoders/nrf905/__init__.py @@ -0,0 +1,26 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2020 Jorge Solla Rubiales +## +## This program is free software; you can redistribute it and/or modify +## it under the terms of the GNU General Public License as published by +## the Free Software Foundation; either version 2 of the License, or +## (at your option) any later version. +## +## This program is distributed in the hope that it will be useful, +## but WITHOUT ANY WARRANTY; without even the implied warranty of +## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +## GNU General Public License for more details. +## +## You should have received a copy of the GNU General Public License +## along with this program; if not, write to the Free Software +## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +## + +''' +This decoder stacks on top of the 'spi' PD and decodes the Nordic Semiconductor +NRF905 (433/868/915MHz transceiver) command/responses. +''' + +from .pd import Decoder diff --git a/decoders/nrf905/pd.py b/decoders/nrf905/pd.py new file mode 100644 index 0000000..4771314 --- /dev/null +++ b/decoders/nrf905/pd.py @@ -0,0 +1,353 @@ +## +## This file is part of the libsigrokdecode project. +## +## Copyright (C) 2020 Jorge Solla Rubiales +## +## Permission is hereby granted, free of charge, to any person obtaining a copy +## of this software and associated documentation files (the "Software"), to deal +## in the Software without restriction, including without limitation the rights +## to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +## copies of the Software, and to permit persons to whom the Software is +## furnished to do so, subject to the following conditions: +## +## The above copyright notice and this permission notice shall be included in all +## copies or substantial portions of the Software. +## +## THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +## IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +## FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +## AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +## LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +## OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +## SOFTWARE. + +import sigrokdecode as srd + +CFG_REGS = { + 0: [{'name': 'CH_NO', 'stbit': 7, 'nbits': 8}], + 1: [ + {'name': 'AUTO_RETRAN', 'stbit': 5, 'nbits': 1, + 'opts': {0: 'No retransmission', 1: 'Retransmission of data packet'}}, + {'name': 'RX_RED_PWR', 'stbit': 4, 'nbits': 1, + 'opts': {0: 'Normal operation', 1: 'Reduced power'}}, + {'name': 'PA_PWR', 'stbit': 3, 'nbits': 2, + 'opts': {0: '-10 dBm', 1: '-2 dBm', 2: '+6 dBm', 3: '+10 dBm'}}, + {'name': 'HFREQ_PLL', 'stbit': 1, 'nbits': 1, + 'opts': {0: '433 MHz', 1: '868 / 915 MHz'}}, + {'name': 'CH_NO_8', 'stbit': 0, 'nbits': 1}, + ], + 2: [ + {'name': 'TX_AFW (TX addr width)', 'stbit': 6, 'nbits': 3}, + {'name': 'RX_AFW (RX addr width)', 'stbit': 2, 'nbits': 3}, + ], + 3: [{'name': 'RW_PW (RX payload width)', 'stbit': 5, 'nbits': 6}], + 4: [{'name': 'TX_PW (TX payload width)', 'stbit': 5, 'nbits': 6}], + 5: [{'name': 'RX_ADDR_0', 'stbit': 7, 'nbits': 8}], + 6: [{'name': 'RX_ADDR_1', 'stbit': 7, 'nbits': 8}], + 7: [{'name': 'RX_ADDR_2', 'stbit': 7, 'nbits': 8}], + 8: [{'name': 'RX_ADDR_3', 'stbit': 7, 'nbits': 8}], + 9: [ + {'name': 'CRC_MODE', 'stbit': 7, 'nbits': 1, + 'opts': {0: '8 CRC check bit', 1: '16 CRC check bit'}}, + {'name': 'CRC_EN', 'stbit': 6, 'nbits': 1, + 'opts': {0: 'Disabled', 1: 'Enabled'}}, + {'name': 'XOR', 'stbit': 5, 'nbits': 3, + 'opts': {0: '4 MHz', 1: '8 MHz', 2: '12 MHz', + 3: '16 MHz', 4: '20 MHz'}}, + {'name': 'UP_CLK_EN', 'stbit': 2, 'nbits': 1, + 'opts': {0: 'No external clock signal avail.', + 1: 'External clock signal enabled'}}, + {'name': 'UP_CLK_FREQ', 'stbit': 1, 'nbits': 2, + 'opts': {0: '4 MHz', 1: '2 MHz', 2: '1 MHz', 3: '500 kHz'}}, + ], +} + +CHN_CFG = [ + {'name': 'PA_PWR', 'stbit': 3, 'nbits': 2, + 'opts': {0: '-10 dBm', 1: '-2 dBm', 2: '+6 dBm', 3: '+10 dBm'}}, + {'name': 'HFREQ_PLL', 'stbit': 1, 'nbits': 1, + 'opts': {0: '433 MHz', 1: '868 / 915 MHz'}}, +] + +STAT_REG = [ + {'name': 'AM', 'stbit': 7, 'nbits': 1}, + {'name': 'DR', 'stbit': 5, 'nbits': 1}, +] + +class Decoder(srd.Decoder): + api_version = 3 + id = 'nrf905' + name = 'nRF905' + longname = 'Nordic Semiconductor nRF905' + desc = '433/868/933MHz transceiver chip.' + license = 'mit' + inputs = ['spi'] + outputs = ['nrf905'] + + annotations = ( + ('cmd', 'Command sent to the device'), + ('reg-write', 'Config register written to the device'), + ('reg-read', 'Config register read from the device'), + ('tx-data', 'Payload sent to the device'), + ('rx-data', 'Payload read from the device'), + ('resp', 'Response to commands received from the device'), + ('warning', 'Warning') + ) + + ann_cmd = 0 + ann_reg_wr = 1 + ann_reg_rd = 2 + ann_tx = 3 + ann_rx = 4 + ann_resp = 5 + ann_warn = 6 + + annotation_rows = ( + ('commands', 'Commands', (ann_cmd,)), + ('responses', 'Responses', (ann_resp,)), + ('registers', 'Registers', (ann_reg_wr, ann_reg_rd)), + ('tx', 'Transmitted data', (ann_tx,)), + ('rx', 'Received data', (ann_rx,)), + ('warnings', 'Warnings', (ann_warn,)) + ) + + def reset_data(self): + self.mosi_bytes, self.miso_bytes = [], [] + self.cmd_samples = {'ss': 0, 'es': 0} + + def __init__(self): + self.ss_cmd, self.es_cmd = 0, 0 + self.cs_asserted = False + self.reset_data() + + def start(self): + self.out_ann = self.register(srd.OUTPUT_ANN) + + def extract_bits(self, byte, start_bit, num_bits): + begin = 7 - start_bit + end = begin + num_bits + + if begin < 0 or end > 8: + return 0 + + binary = format(byte, '08b')[begin:end] + return int(binary, 2) + + def extract_vars(self, reg_vars, reg_value): + # Iterate all vars on current register. + data = '' + for var in reg_vars: + var_value = self.extract_bits(reg_value, var['stbit'], + var['nbits']) + data += var['name'] + ' = ' + str(var_value) + opt = '' + + # If var has options, just add the option meaning. + if 'opts' in var: + if var_value in var['opts']: + opt = var['opts'][var_value] + else: + opt = 'unknown' + data += ' (' + opt + ')' + + # Add var separator. + if reg_vars.index(var) != len(reg_vars) - 1: + data = data + ' | ' + return data + + def parse_config_register(self, addr, value, is_write): + reg_value = value[0] + data = 'CFG_REG[' + hex(addr) + '] -> ' + + # Get register vars for this register. + if addr in CFG_REGS: + reg_vars = CFG_REGS[addr] + else: + # Invalid register address. + self.put(value[1], value[2], + self.out_ann, [self.ann_warn, ['Invalid reg. addr']]) + return + + data += self.extract_vars(reg_vars, reg_value) + + if is_write: + ann = self.ann_reg_wr + else: + ann = self.ann_reg_rd + + self.put(value[1], value[2], self.out_ann, [ann, [data]]) + + def parse_config_registers(self, addr, registers, is_write): + i = 0 + while i < len(registers): + reg_addr = i + addr + if reg_addr <= 9: + self.parse_config_register(reg_addr, registers[i], is_write) + else: + print('INVALID REGISTER ADDR ' + hex(reg_addr)) + i += 1 + + def dump_cmd_bytes(self, prefix, cmd_bytes, ann): + ss = cmd_bytes[1][1] + es = 0 + data = '' + for byte in cmd_bytes[1:]: + data += '0x' + format(byte[0], '02x') + ' ' + es = byte[2] + + self.put(ss, es, self.out_ann, [ann, [prefix + data]]) + + def handle_WC(self): + start_addr = self.mosi_bytes[0][0] & 0x0F + + if start_addr > 9: + print('ERROR: WRONG OFFSET') + return + + self.parse_config_registers(start_addr, self.mosi_bytes[1:], True) + + def handle_RC(self): + start_addr = self.mosi_bytes[0][0] & 0x0F + + if start_addr > 9: + print('ERROR: WRONG OFFSET') + return + self.parse_config_registers(start_addr, self.miso_bytes[1:], False) + + def handle_WTP(self): + self.dump_cmd_bytes('Write TX payload.: ', + self.mosi_bytes, self.ann_tx) + + def handle_RTP(self): + self.dump_cmd_bytes('Read TX payload: ', + self.miso_bytes, self.ann_resp) + + def handle_WTA(self): + self.dump_cmd_bytes('Write TX addr: ', + self.mosi_bytes, self.ann_reg_wr) + + def handle_RTA(self): + self.dump_cmd_bytes('Read TX addr: ', + self.miso_bytes, self.ann_resp) + + def handle_RRP(self): + self.dump_cmd_bytes('Read RX payload: ', + self.miso_bytes, self.ann_rx) + + def handle_CC(self): + cmd = self.mosi_bytes[0] + dta = self.mosi_bytes[1] + + channel = (cmd[0] & 0x01) << 8 + channel = channel + dta[0] + + data = self.extract_vars(CHN_CFG, cmd[0]) + + data = data + '| CHN = ' + str(channel) + self.put(self.mosi_bytes[0][1], self.mosi_bytes[1][2], + self.out_ann, [self.ann_reg_wr, [data]]) + + def handle_STAT(self): + status = 'STAT = ' + self.extract_vars(STAT_REG, self.miso_bytes[0][0]) + self.put(self.miso_bytes[0][1], self.miso_bytes[0][2], + self.out_ann, [self.ann_reg_rd, [status]]) + + def process_cmd(self): + cmd = '' + cmd_name = '' + cmd_hnd = None + + for byte in self.mosi_bytes: + cmd += hex(byte[0]) + ' ' + + cmd = self.mosi_bytes[0][0] + + if (cmd & 0xF0) == 0x00: + cmd_name = 'CMD: W_CONFIG (WC)' + cmd_hnd = self.handle_WC + + elif (cmd & 0xF0) == 0x10: + cmd_name = 'CMD: R_CONFIG (RC)' + cmd_hnd = self.handle_RC + + elif cmd == 0x20: + cmd_name = 'CMD: W_TX_PAYLOAD (WTP)' + cmd_hnd = self.handle_WTP + + elif cmd == 0x21: + cmd_name = 'CMD: R_TX_PAYLOAD (RTP)' + cmd_hnd = self.handle_RTP + + elif cmd == 0x22: + cmd_name = 'CMD: W_TX_ADDRESS (WTA)' + cmd_hnd = self.handle_WTA + + elif cmd == 0x23: + cmd_name = 'CMD: R_TX_ADDRESS (RTA)' + cmd_hnd = self.handle_RTA + + elif cmd == 0x24: + cmd_name = 'CMD: R_RX_PAYLOAD (RRP)' + cmd_hnd = self.handle_RRP + + elif (cmd & 0xF0 == 0x80): + cmd_name = 'CMD: CHANNEL_CONFIG (CC)' + cmd_hnd = self.handle_CC + + # Report command name. + self.put(self.cmd_samples['ss'], self.cmd_samples['es'], + self.out_ann, [self.ann_cmd, [cmd_name]]) + + # Handle status byte. + self.handle_STAT() + + # Handle command. + if cmd_hnd is not None: + cmd_hnd() + + def set_cs_status(self, sample, asserted): + if self.cs_asserted == asserted: + return + + if asserted: + self.cmd_samples['ss'] = sample + self.cmd_samples['es'] = -1 + else: + self.cmd_samples['es'] = sample + + self.cs_asserted = asserted + + def decode(self, ss, es, data): + ptype, data1, data2 = data + + if ptype == 'CS-CHANGE': + if data1 is None and data2 is None: + self.requirements_met = False + raise ChannelError('CS# pin required.') + + if data1 is None and data2 == 0: + self.set_cs_status(ss, True) + + elif data1 is None and data2 == 1: + self.set_cs_status(ss, False) + + elif data1 == 1 and data2 == 0: + self.set_cs_status(ss, True) + + elif data1 == 0 and data2 == 1: + self.set_cs_status(ss, False) + if len(self.mosi_bytes): + self.process_cmd() + self.reset_data() + + elif ptype == 'DATA': + # Ignore traffic if CS is not asserted. + if self.cs_asserted is False: + return + + mosi, miso = data1, data2 + if miso is None or mosi is None: + raise ChannelError('Both MISO and MOSI pins required.') + + self.mosi_bytes.append((mosi, ss, es)) + self.miso_bytes.append((miso, ss, es))