From: Bert Vermeulen <redacted>
Date: Thu, 17 May 2012 00:03:12 +0000 (+0200)
Subject: hantek-dso: support SR_HWCAP_VDIV
X-Git-Tag: dsupstream~939
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=313deed219c39a902e6b7c39cf519c3476b9798d;p=libsigrok.git

hantek-dso: support SR_HWCAP_VDIV
---

diff --git a/hardware/hantek-dso/api.c b/hardware/hantek-dso/api.c
index 898bccec..6c1042ff 100644
--- a/hardware/hantek-dso/api.c
+++ b/hardware/hantek-dso/api.c
@@ -49,6 +49,7 @@ static int capabilities[] = {
 	SR_HWCAP_TRIGGER_SLOPE,
 	SR_HWCAP_HORIZ_TRIGGERPOS,
 	SR_HWCAP_FILTER,
+	SR_HWCAP_VDIV,
 	0,
 };
 
@@ -95,6 +96,21 @@ static struct sr_rational timebases[] = {
 	{0,0}
 };
 
+static struct sr_rational vdivs[] = {
+	/* millivolts */
+	{ 10, 1000 },
+	{ 20, 1000 },
+	{ 50, 1000 },
+	{ 100, 1000 },
+	{ 200, 1000 },
+	{ 500, 1000 },
+	/* volts */
+	{ 1, 1 },
+	{ 2, 1 },
+	{ 5, 1 },
+	{0,0}
+};
+
 static char *trigger_sources[] = {
 	"CH1",
 	"CH2",
@@ -365,6 +381,9 @@ static void *hw_get_device_info(int dev_index, int dev_info_id)
 	case SR_DI_FILTERS:
 		info = filter_targets;
 		break;
+	case SR_DI_VDIVS:
+		info = vdivs;
+		break;
 	/* TODO remove this */
 	case SR_DI_CUR_SAMPLERATE:
 		info = &tmp;
@@ -483,6 +502,20 @@ static int hw_dev_config_set(int dev_index, int hwcap, void *value)
 		}
 		g_strfreev(targets);
 		break;
+	case SR_HWCAP_VDIV:
+		/* TODO not supporting vdiv per channel yet */
+		tmp_rat = *(struct sr_rational *)value;
+		for (i = 0; vdivs[i].p && vdivs[i].q; i++) {
+			if (vdivs[i].p == tmp_rat.p
+					&& vdivs[i].q == tmp_rat.q) {
+				ctx->voltage_ch1 = i;
+				ctx->voltage_ch2 = i;
+				break;
+			}
+		}
+		if (vdivs[i].p == 0 && vdivs[i].q == 0)
+			ret = SR_ERR_ARG;
+		break;
 	default:
 		ret = SR_ERR_ARG;
 	}
diff --git a/hardware/hantek-dso/dso.c b/hardware/hantek-dso/dso.c
index 3f65eed9..00dde6da 100644
--- a/hardware/hantek-dso/dso.c
+++ b/hardware/hantek-dso/dso.c
@@ -377,15 +377,52 @@ SR_PRIV int dso_set_voltage(struct context *ctx)
 	int ret, tmp;
 	uint8_t cmdstring[8];
 
-	sr_dbg("hantek-dso: sending CMD_SET_VOLTAGE");
+	sr_dbg("hantek-dso: preparing CMD_SET_VOLTAGE");
 
 	memset(cmdstring, 0, sizeof(cmdstring));
 	cmdstring[0] = CMD_SET_VOLTAGE;
 	cmdstring[1] = 0x0f;
-	cmdstring[2] = 0x03;
-	cmdstring[2] |= ((2 - ctx->voltage_ch1 % 3) << 6);
-	cmdstring[2] |= ((2 - ctx->voltage_ch2 % 3) << 4);
-cmdstring[2] = 0x30;
+	cmdstring[2] = 0x30;
+
+	/* CH1 volts/div is encoded in bits 0-1 */
+	sr_dbg("hantek-dso: CH1 vdiv index %d", ctx->voltage_ch1);
+	switch (ctx->voltage_ch1) {
+	case VDIV_1V:
+	case VDIV_100MV:
+	case VDIV_10MV:
+		cmdstring[2] |= 0x00;
+		break;
+	case VDIV_2V:
+	case VDIV_200MV:
+	case VDIV_20MV:
+		cmdstring[2] |= 0x01;
+		break;
+	case VDIV_5V:
+	case VDIV_500MV:
+	case VDIV_50MV:
+		cmdstring[2] |= 0x02;
+		break;
+	}
+
+	/* CH2 volts/div is encoded in bits 2-3 */
+	sr_dbg("hantek-dso: CH2 vdiv index %d", ctx->voltage_ch2);
+	switch (ctx->voltage_ch2) {
+	case VDIV_1V:
+	case VDIV_100MV:
+	case VDIV_10MV:
+		cmdstring[2] |= 0x00;
+		break;
+	case VDIV_2V:
+	case VDIV_200MV:
+	case VDIV_20MV:
+		cmdstring[2] |= 0x08;
+		break;
+	case VDIV_5V:
+	case VDIV_500MV:
+	case VDIV_50MV:
+		cmdstring[2] |= 0x04;
+		break;
+	}
 
 	if (send_begin(ctx) != SR_OK)
 		return SR_ERR;
@@ -397,6 +434,7 @@ cmdstring[2] = 0x30;
 		sr_err("Failed to set voltage: %d", ret);
 		return SR_ERR;
 	}
+	sr_dbg("hantek-dso: sent CMD_SET_VOLTAGE");
 
 	return SR_OK;
 }
@@ -559,9 +597,6 @@ SR_PRIV int dso_init(struct context *ctx)
 	if (dso_enable_trigger(ctx) != SR_OK)
 		return SR_ERR;
 
-	if (dso_force_trigger(ctx) != SR_OK)
-		return SR_ERR;
-
 	return SR_OK;
 }
 
diff --git a/hardware/hantek-dso/dso.h b/hardware/hantek-dso/dso.h
index 42077c0a..53d953e1 100644
--- a/hardware/hantek-dso/dso.h
+++ b/hardware/hantek-dso/dso.h
@@ -32,7 +32,7 @@
 
 #define MAX_CAPTURE_EMPTY      3
 
-#define DEFAULT_VOLTAGE            VOLTAGE_2V
+#define DEFAULT_VOLTAGE            VDIV_500MV
 #define DEFAULT_FRAMESIZE          FRAMESIZE_SMALL
 #define DEFAULT_TIMEBASE           TIME_100us
 #define DEFAULT_TRIGGER_SOURCE     "CH1"
@@ -67,22 +67,11 @@ enum dso_commands {
 	CMD_GET_CHANNELDATA,
 	CMD_GET_CAPTURESTATE,
 	CMD_SET_VOLTAGE,
+	/* unused */
 	cmdSetLogicalData,
 	cmdGetLogicalData
 };
 
-enum voltages {
-	VOLTAGE_5V = 0,
-	VOLTAGE_2V,
-	VOLTAGE_1V,
-	VOLTAGE_500mV,
-	VOLTAGE_200mV,
-	VOLTAGE_100mV,
-	VOLTAGE_50mV,
-	VOLTAGE_20mV,
-	VOLTAGE_10mV
-};
-
 enum couplings {
 	COUPLING_AC = 0,
 	COUPLING_DC,
@@ -107,6 +96,19 @@ enum time_bases {
 	TIME_400ms
 };
 
+/* Must match the vdivs table, these are just handy indexes into it. */
+enum {
+	VDIV_10MV,
+	VDIV_20MV,
+	VDIV_50MV,
+	VDIV_100MV,
+	VDIV_200MV,
+	VDIV_500MV,
+	VDIV_1V,
+	VDIV_2V,
+	VDIV_5V,
+};
+
 enum trigger_slopes {
 	SLOPE_POSITIVE = 0,
 	SLOPE_NEGATIVE