From: Uwe Hermann Date: Sat, 9 Mar 2013 10:50:58 +0000 (+0100) Subject: beagleboard_nixie_cape: Cosmetics. X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=3001a69503430dcf32c88b3742e86ec37d33db1a;p=sigrok-dumps.git beagleboard_nixie_cape: Cosmetics. --- diff --git a/vfd/max6921/beagleboard_nixie_cape/README b/vfd/max6921/beagleboard_nixie_cape/README index f6cd92d..740ad18 100644 --- a/vfd/max6921/beagleboard_nixie_cape/README +++ b/vfd/max6921/beagleboard_nixie_cape/README @@ -2,24 +2,31 @@ MAX6921 Shift Register ------------------------------------------------------------------------------- -This is a capture of data output to a MAX6921 high voltage shift register that -was outputting data for a VFD clock. +This is a capture of data output to a Maxim MAX6921 high voltage shift +register that was outputting data for a VFD clock. The signals were grabbed on a 28-pin PLCC chip (MAX6921) which outputs 20-bits that is crafted as a design for VFD applications. +Details: + - BeagleBoard.org vendor tree: https://github.com/beagleboard/kernel + - Beagle Nixie GitHub: https://github.com/mranostay/beagle-nixie/ + - MAX6921 datasheet: http://datasheets.maximintegrated.com/en/ds/MAX6921-MAX6931.pdf + + Logic analyzer setup -------------------- -The logic analyzer used was Open Bench Logic Sniffer (at 10Mhz): +The logic analyzer used was Open Bench Logic Sniffer (at 10MHz): - Probe MAX6921 Pin + Probe MAX6921 pin -------------------------- - 0 LOAD + 0 LOAD 1 DATA 2 CLK 3 BLANK (PWM Brightness Control) + Data ---- @@ -27,39 +34,31 @@ The data contain various values for the VFD being driven, as reference at the prototype Nixie Cape for the Beaglebone. Digit Bit - -------------------------- - 0 1<<12 - 1 1<<19 - 2 1<<13 - 3 1<<18 - 4 1<<14 - 5 1<<17 - 6 1<<16 - 7 1<<15 - 8 1<<15 - 9 1<<11 + ----------------------- + 0 (1 << 12) + 1 (1 << 19) + 2 (1 << 13) + 3 (1 << 18) + 4 (1 << 14) + 5 (1 << 17) + 6 (1 << 16) + 7 (1 << 15) + 8 (1 << 15) + 9 (1 << 11) Segment Bit - --------------------------- - SEG_A 1<<0 - SEG_B 1<<1 - SEG_C 1<<2 - SEG_D 1<<3 - SEG_E 1<<4 - SEG_F 1<<5 - SEG_G 1<<6 - SEG_H 1<<7 - - -References: ------------ - - * BeagleBoard.org Vendor Tree (https://github.com/beagleboard/kernel) - * Beagle Nixie GitHub (https://github.com/mranostay/beagle-nixie/) - * MAX6921 Datasheet (http://datasheets.maximintegrated.com/en/ds/MAX6921-MAX6931.pdf) + ----------------------- + SEG_A (1 << 0) + SEG_B (1 << 1) + SEG_C (1 << 2) + SEG_D (1 << 3) + SEG_E (1 << 4) + SEG_F (1 << 5) + SEG_G (1 << 6) + SEG_H (1 << 7) The sigrok command line used was: - sigrok-cli --driver=ols:conn=/dev/ttyACM0 -d samplerate=10mhz \ - -samples=24576 -p 0=LOAD,1=DATA,2=CLK,3=BLANK -o max6921_data_10mhz.sr + sigrok-cli --driver=ols:conn=/dev/ttyACM0 -d samplerate=10mhz \ + --samples=24576 -p 0=LOAD,1=DATA,2=CLK,3=BLANK -o