From: Uwe Hermann Date: Fri, 13 Jan 2012 21:29:24 +0000 (+0100) Subject: JTAG: Add olimex_stm32-h103_init_10s.sr. X-Git-Tag: sigrok-dumps-0.1.0~31 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=28746e24354e6053f9d963341ef1965feab162c5;p=libsigrokdecode.git JTAG: Add olimex_stm32-h103_init_10s.sr. --- diff --git a/jtag/olimex_stm32-h103/README b/jtag/olimex_stm32-h103/README index 58093e2..19416af 100644 --- a/jtag/olimex_stm32-h103/README +++ b/jtag/olimex_stm32-h103/README @@ -34,12 +34,10 @@ The logic analyzer used for capturing was a Saleae Logic: 6 (green) RST -JTAG/OpenOCD setup ------------------- +olimex_stm32-h103_flash_fancyblink.sr +------------------------------------- -The OpenOCD used was "0.5.0 (2011-08-09-08:45)" (Debian version 0.5.0-1). - -It was invoked like this: +The OpenOCD used was "0.5.0 (2011-08-09-08:45)" (Debian version 0.5.0-1): openocd -f interface/flossjtag-noeeprom.cfg \ -f board/olimex_stm32_h107.cfg \ @@ -49,12 +47,24 @@ It was invoked like this: -c "reset" \ -c "shutdown" -sigrok setup ------------- - The sigrok command line used was: sigrok-cli -d 0:samplerate=4mhz --time 20s \ -p '1=TRST,2=TDI,3=TMS,4=TCK,5=TDO,6=RST' \ -o olimex_stm32-h103_flash_fancyblink.sr + +olimex_stm32-h103_init_10s.sr +----------------------------- + +The following OpenOCD command was used: + + openocd -f interface/flossjtag-noeeprom.cfg -f board/olimex_stm32_h107.cfg \ + -c "init" + +The sigrok command line used was: + + sigrok-cli -d 0:samplerate=4mhz --time 10s \ + -p '1=TRST,2=TDI,3=TMS,4=TCK,5=TDO,6=RST' -o + + diff --git a/jtag/olimex_stm32-h103/olimex_stm32-h103_init_10s.sr b/jtag/olimex_stm32-h103/olimex_stm32-h103_init_10s.sr new file mode 100644 index 0000000..165fe52 Binary files /dev/null and b/jtag/olimex_stm32-h103/olimex_stm32-h103_init_10s.sr differ