From: Joel Holdsworth <redacted>
Date: Tue, 13 Jun 2017 22:27:03 +0000 (-0600)
Subject: dslogic: Fixed voltage selection
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=1ee70746165561e20ad9ef8552c9a6b2bc44d4a0;p=libsigrok.git

dslogic: Fixed voltage selection
---

diff --git a/src/hardware/dslogic/api.c b/src/hardware/dslogic/api.c
index 767b2a83..7ee747a1 100644
--- a/src/hardware/dslogic/api.c
+++ b/src/hardware/dslogic/api.c
@@ -75,12 +75,11 @@ static const char *const signal_edge_names[] = {
 };
 
 static const struct {
-	int range;
 	gdouble low;
 	gdouble high;
-} volt_thresholds[] = {
-	{ DS_VOLTAGE_RANGE_18_33_V, 0.7, 1.4 },
-	{ DS_VOLTAGE_RANGE_5_V, 1.4, 3.6 },
+} dslogic_voltage_thresholds[] = {
+	{ 0.7, 1.4 },
+	{ 1.4, 3.6 },
 };
 
 static const uint64_t samplerates[] = {
@@ -374,6 +373,9 @@ static int dev_open(struct sr_dev_inst *sdi)
 		devc->cur_samplerate = devc->samplerates[0];
 	}
 
+	if (devc->cur_threshold == 0.0)
+		devc->cur_threshold = 1.5;
+
 	return SR_OK;
 }
 
@@ -402,7 +404,7 @@ static int config_get(uint32_t key, GVariant **data,
 	struct dev_context *devc;
 	struct sr_usb_dev_inst *usb;
 	GVariant *range[2];
-	unsigned int i;
+	unsigned int i, voltage_range;
 	char str[128];
 
 	(void)cg;
@@ -425,14 +427,25 @@ static int config_get(uint32_t key, GVariant **data,
 		*data = g_variant_new_string(str);
 		break;
 	case SR_CONF_VOLTAGE_THRESHOLD:
-		for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
-			if (volt_thresholds[i].range != devc->voltage_threshold)
-				continue;
-			range[0] = g_variant_new_double(volt_thresholds[i].low);
-			range[1] = g_variant_new_double(volt_thresholds[i].high);
-			*data = g_variant_new_tuple(range, 2);
-			break;
+		if (!strcmp(devc->profile->model, "DSLogic")) {
+			voltage_range = 0;
+
+			for (i = 0; i < ARRAY_SIZE(dslogic_voltage_thresholds); i++)
+				if (dslogic_voltage_thresholds[i].low ==
+					devc->cur_threshold) {
+					voltage_range = i;
+					break;
+				}
+
+			range[0] = g_variant_new_double(
+				dslogic_voltage_thresholds[voltage_range].low);
+			range[1] = g_variant_new_double(
+				dslogic_voltage_thresholds[voltage_range].high);
+		} else {
+			range[0] = g_variant_new_double(devc->cur_threshold);
+			range[1] = g_variant_new_double(devc->cur_threshold);
 		}
+		*data = g_variant_new_tuple(range, 2);
 		break;
 	case SR_CONF_LIMIT_SAMPLES:
 		*data = g_variant_new_uint64(devc->limit_samples);
@@ -525,15 +538,20 @@ static int config_set(uint32_t key, GVariant *data,
 		break;
 	case SR_CONF_VOLTAGE_THRESHOLD:
 		g_variant_get(data, "(dd)", &low, &high);
-		ret = SR_ERR_ARG;
-		for (i = 0; (unsigned int)i < ARRAY_SIZE(volt_thresholds); i++) {
-			if (fabs(volt_thresholds[i].low - low) < 0.1 &&
-			    fabs(volt_thresholds[i].high - high) < 0.1) {
-				devc->voltage_threshold = volt_thresholds[i].range;
-				break;
+		if (!strcmp(devc->profile->model, "DSLogic")) {
+			for (i = 0; (unsigned int)i <
+				ARRAY_SIZE(dslogic_voltage_thresholds); i++) {
+				if (fabs(dslogic_voltage_thresholds[i].low - low) < 0.1 &&
+				    fabs(dslogic_voltage_thresholds[i].high - high) < 0.1) {
+					devc->cur_threshold =
+						dslogic_voltage_thresholds[i].low;
+					break;
+				}
 			}
+			ret = dslogic_fpga_firmware_upload(sdi);
+		} else {
+			ret = dslogic_set_voltage_threshold(sdi, (low + high) / 2.0);
 		}
-		ret = dslogic_fpga_firmware_upload(sdi);
 		break;
 	case SR_CONF_EXTERNAL_CLOCK:
 		devc->external_clock = g_variant_get_boolean(data);
@@ -558,10 +576,11 @@ static int config_set(uint32_t key, GVariant *data,
 static int config_list(uint32_t key, GVariant **data,
 	const struct sr_dev_inst *sdi, const struct sr_channel_group *cg)
 {
-	struct dev_context *devc;
+	struct dev_context *devc = NULL;
 	GVariant *gvar, *range[2];
 	GVariantBuilder gvb;
 	unsigned int i;
+	double v;
 
 	(void)cg;
 
@@ -581,15 +600,23 @@ static int config_list(uint32_t key, GVariant **data,
 		}
 		break;
 	case SR_CONF_VOLTAGE_THRESHOLD:
-		if (!sdi->priv)
-			return SR_ERR_ARG;
-		devc = sdi->priv;
+		if (sdi->priv)
+			devc = sdi->priv;
 		g_variant_builder_init(&gvb, G_VARIANT_TYPE_ARRAY);
-		for (i = 0; i < ARRAY_SIZE(volt_thresholds); i++) {
-			range[0] = g_variant_new_double(volt_thresholds[i].low);
-			range[1] = g_variant_new_double(volt_thresholds[i].high);
-			gvar = g_variant_new_tuple(range, 2);
-			g_variant_builder_add_value(&gvb, gvar);
+		if (devc && !strcmp(devc->profile->model, "DSLogic")) {
+			for (i = 0; i < ARRAY_SIZE(dslogic_voltage_thresholds); i++) {
+				range[0] = g_variant_new_double(dslogic_voltage_thresholds[i].low);
+				range[1] = g_variant_new_double(dslogic_voltage_thresholds[i].high);
+				gvar = g_variant_new_tuple(range, 2);
+				g_variant_builder_add_value(&gvb, gvar);
+			}
+		} else {
+			for (v = 0.0; v <= 5.0; v += 0.1) {
+				range[0] = g_variant_new_double(v);
+				range[1] = g_variant_new_double(v);
+				gvar = g_variant_new_tuple(range, 2);
+				g_variant_builder_add_value(&gvb, gvar);
+			}
 		}
 		*data = g_variant_builder_end(&gvb);
 		break;
@@ -737,15 +764,6 @@ static int trigger_request(const struct sr_dev_inst *sdi)
 	if ((ret = dslogic_fpga_configure(sdi)) != SR_OK)
 		return ret;
 
-	/* If this is a DSLogic Pro, set the voltage threshold. */
-	if (!strcmp(devc->profile->model, "DSLogic Pro")){
-		if (devc->voltage_threshold == DS_VOLTAGE_RANGE_18_33_V) {
-			dslogic_set_vth(sdi, 1.4);
-		} else {
-			dslogic_set_vth(sdi, 3.3);
-		}
-	}
-
 	if ((ret = dslogic_start_acquisition(sdi)) != SR_OK)
 		return ret;
 
diff --git a/src/hardware/dslogic/dslogic.c b/src/hardware/dslogic/dslogic.c
index 297af2b0..adf197f3 100644
--- a/src/hardware/dslogic/dslogic.c
+++ b/src/hardware/dslogic/dslogic.c
@@ -36,29 +36,6 @@
 
 #define USB_TIMEOUT (3 * 1000)
 
-SR_PRIV int dslogic_set_vth(const struct sr_dev_inst *sdi, double vth)
-{
-	struct sr_usb_dev_inst *usb;
-	int ret;
-	const uint8_t value = (vth / 5.0) * 255;
-	const uint16_t cmd = value | (DS_ADDR_VTH << 8);
-
-	usb = sdi->conn;
-
-	/* Send the control command. */
-	ret = libusb_control_transfer(usb->devhdl,
-			LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT,
-			DS_CMD_WR_REG, 0x0000, 0x0000,
-			(unsigned char *)&cmd, sizeof(cmd), 3000);
-	if (ret < 0) {
-		sr_err("Unable to send VTH command: %s.",
-		libusb_error_name(ret));
-		return SR_ERR;
-	}
-
-	return SR_OK;
-}
-
 SR_PRIV int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi)
 {
 	const char *name = NULL;
@@ -78,7 +55,7 @@ SR_PRIV int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi)
 	usb = sdi->conn;
 
 	if (!strcmp(devc->profile->model, "DSLogic")) {
-		if (devc->voltage_threshold == DS_VOLTAGE_RANGE_18_33_V)
+		if (devc->cur_threshold < 1.40)
 			name = DSLOGIC_FPGA_FIRMWARE_3V3;
 		else
 			name = DSLOGIC_FPGA_FIRMWARE_5V;
diff --git a/src/hardware/dslogic/dslogic.h b/src/hardware/dslogic/dslogic.h
index aac64aa0..858cdd56 100644
--- a/src/hardware/dslogic/dslogic.h
+++ b/src/hardware/dslogic/dslogic.h
@@ -71,11 +71,6 @@ enum dslogic_operation_modes {
 	DS_OP_LOOPBACK_TEST,
 };
 
-enum {
-	DS_VOLTAGE_RANGE_18_33_V,	/* 1.8V and 3.3V logic */
-	DS_VOLTAGE_RANGE_5_V,		/* 5V logic */
-};
-
 enum {
 	DS_EDGE_RISING,
 	DS_EDGE_FALLING,
@@ -152,7 +147,6 @@ SR_PRIV int dslogic_fpga_firmware_upload(const struct sr_dev_inst *sdi);
 SR_PRIV int dslogic_start_acquisition(const struct sr_dev_inst *sdi);
 SR_PRIV int dslogic_stop_acquisition(const struct sr_dev_inst *sdi);
 SR_PRIV int dslogic_fpga_configure(const struct sr_dev_inst *sdi);
-SR_PRIV int dslogic_set_vth(const struct sr_dev_inst *sdi, double vth);
 SR_PRIV int dslogic_get_number_of_transfers(struct dev_context *devc);
 
 #endif
diff --git a/src/hardware/dslogic/protocol.c b/src/hardware/dslogic/protocol.c
index 76e82a97..85af9ba5 100644
--- a/src/hardware/dslogic/protocol.c
+++ b/src/hardware/dslogic/protocol.c
@@ -77,6 +77,30 @@ static int command_get_revid_version(struct sr_dev_inst *sdi, uint8_t *revid)
 	return SR_OK;
 }
 
+SR_PRIV int dslogic_set_voltage_threshold(const struct sr_dev_inst *sdi, double threshold)
+{
+	int ret;
+	struct dev_context *const devc = sdi->priv;
+	const struct sr_usb_dev_inst *const usb = sdi->conn;
+	const uint8_t value = (threshold / 5.0) * 255;
+	const uint16_t cmd = value | (DS_ADDR_VTH << 8);
+
+	/* Send the control command. */
+	ret = libusb_control_transfer(usb->devhdl,
+			LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_ENDPOINT_OUT,
+			DS_CMD_WR_REG, 0x0000, 0x0000,
+			(unsigned char *)&cmd, sizeof(cmd), 3000);
+	if (ret < 0) {
+		sr_err("Unable to set voltage-threshold register: %s.",
+		libusb_error_name(ret));
+		return SR_ERR;
+	}
+
+	devc->cur_threshold = threshold;
+
+	return SR_OK;
+}
+
 SR_PRIV int dslogic_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di)
 {
 	libusb_device **devlist;
diff --git a/src/hardware/dslogic/protocol.h b/src/hardware/dslogic/protocol.h
index b5edb96d..8e889940 100644
--- a/src/hardware/dslogic/protocol.h
+++ b/src/hardware/dslogic/protocol.h
@@ -105,9 +105,10 @@ struct dev_context {
 	gboolean external_clock;
 	gboolean continuous_mode;
 	int clock_edge;
-	int voltage_threshold;
+	double cur_threshold;
 };
 
+SR_PRIV int dslogic_set_voltage_threshold(const struct sr_dev_inst *sdi, double threshold);
 SR_PRIV int dslogic_command_start_acquisition(const struct sr_dev_inst *sdi);
 SR_PRIV int dslogic_dev_open(struct sr_dev_inst *sdi, struct sr_dev_driver *di);
 SR_PRIV struct dev_context *dslogic_dev_new(void);