From: Uwe Hermann <redacted>
Date: Sat, 14 May 2016 15:30:10 +0000 (+0200)
Subject: brymen-dmm: Convert to SR_DF_ANALOG.
X-Git-Tag: libsigrok-0.5.0~333
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=1653c4309ab4d5756a2af7520d7d13a63f5e3619;p=libsigrok.git

brymen-dmm: Convert to SR_DF_ANALOG.
---

diff --git a/src/hardware/brymen-dmm/parser.c b/src/hardware/brymen-dmm/parser.c
index aaa2c3f4..a5e8333a 100644
--- a/src/hardware/brymen-dmm/parser.c
+++ b/src/hardware/brymen-dmm/parser.c
@@ -192,7 +192,7 @@ static void parse_flags(const uint8_t *buf, struct brymen_flags *info)
 }
 
 SR_PRIV int brymen_parse(const uint8_t *buf, float *floatval,
-		struct sr_datafeed_analog_old *analog, void *info)
+		struct sr_datafeed_analog *analog, void *info)
 {
 	struct brymen_flags flags;
 	struct brymen_header *hdr;
@@ -204,7 +204,7 @@ SR_PRIV int brymen_parse(const uint8_t *buf, float *floatval,
 	hdr = (void *)buf;
 	bfunc = (uint8_t *)(buf + sizeof(struct brymen_header));
 
-	analog->mqflags = 0;
+	analog->meaning->mqflags = 0;
 
 	/* Give some debug info about the package. */
 	asciilen = hdr->len - 4;
@@ -218,43 +218,43 @@ SR_PRIV int brymen_parse(const uint8_t *buf, float *floatval,
 		return SR_ERR;
 
 	if (flags.is_volt) {
-		analog->mq = SR_MQ_VOLTAGE;
-		analog->unit = SR_UNIT_VOLT;
+		analog->meaning->mq = SR_MQ_VOLTAGE;
+		analog->meaning->unit = SR_UNIT_VOLT;
 	}
 	if (flags.is_amp) {
-		analog->mq = SR_MQ_CURRENT;
-		analog->unit = SR_UNIT_AMPERE;
+		analog->meaning->mq = SR_MQ_CURRENT;
+		analog->meaning->unit = SR_UNIT_AMPERE;
 	}
 	if (flags.is_ohm) {
 		if (flags.is_beep)
-			analog->mq = SR_MQ_CONTINUITY;
+			analog->meaning->mq = SR_MQ_CONTINUITY;
 		else
-			analog->mq = SR_MQ_RESISTANCE;
-		analog->unit = SR_UNIT_OHM;
+			analog->meaning->mq = SR_MQ_RESISTANCE;
+		analog->meaning->unit = SR_UNIT_OHM;
 	}
 	if (flags.is_hertz) {
-		analog->mq = SR_MQ_FREQUENCY;
-		analog->unit = SR_UNIT_HERTZ;
+		analog->meaning->mq = SR_MQ_FREQUENCY;
+		analog->meaning->unit = SR_UNIT_HERTZ;
 	}
 	if (flags.is_duty_cycle) {
-		analog->mq = SR_MQ_DUTY_CYCLE;
-		analog->unit = SR_UNIT_PERCENTAGE;
+		analog->meaning->mq = SR_MQ_DUTY_CYCLE;
+		analog->meaning->unit = SR_UNIT_PERCENTAGE;
 	}
 	if (flags.is_capacitance) {
-		analog->mq = SR_MQ_CAPACITANCE;
-		analog->unit = SR_UNIT_FARAD;
+		analog->meaning->mq = SR_MQ_CAPACITANCE;
+		analog->meaning->unit = SR_UNIT_FARAD;
 	}
 	if (flags.is_fahrenheit) {
-		analog->mq = SR_MQ_TEMPERATURE;
-		analog->unit = SR_UNIT_FAHRENHEIT;
+		analog->meaning->mq = SR_MQ_TEMPERATURE;
+		analog->meaning->unit = SR_UNIT_FAHRENHEIT;
 	}
 	if (flags.is_celsius) {
-		analog->mq = SR_MQ_TEMPERATURE;
-		analog->unit = SR_UNIT_CELSIUS;
+		analog->meaning->mq = SR_MQ_TEMPERATURE;
+		analog->meaning->unit = SR_UNIT_CELSIUS;
 	}
 	if (flags.is_capacitance) {
-		analog->mq = SR_MQ_CAPACITANCE;
-		analog->unit = SR_UNIT_FARAD;
+		analog->meaning->mq = SR_MQ_CAPACITANCE;
+		analog->meaning->unit = SR_UNIT_FARAD;
 	}
 
 	/*
@@ -265,8 +265,8 @@ SR_PRIV int brymen_parse(const uint8_t *buf, float *floatval,
 	 * identify the value as ohm, not dBmW.
 	 */
 	if (flags.is_decibel && !flags.is_ohm) {
-		analog->mq = SR_MQ_POWER;
-		analog->unit = SR_UNIT_DECIBEL_MW;
+		analog->meaning->mq = SR_MQ_POWER;
+		analog->meaning->unit = SR_UNIT_DECIBEL_MW;
 		/*
 		 * For some reason, dBm measurements are sent by the multimeter
 		 * with a value three orders of magnitude smaller than the
@@ -276,12 +276,12 @@ SR_PRIV int brymen_parse(const uint8_t *buf, float *floatval,
 	}
 
 	if (flags.is_diode)
-		analog->mqflags |= SR_MQFLAG_DIODE;
+		analog->meaning->mqflags |= SR_MQFLAG_DIODE;
 	/* We can have both AC+DC in a single measurement. */
 	if (flags.is_ac)
-		analog->mqflags |= SR_MQFLAG_AC;
+		analog->meaning->mqflags |= SR_MQFLAG_AC;
 	if (flags.is_dc)
-		analog->mqflags |= SR_MQFLAG_DC;
+		analog->meaning->mqflags |= SR_MQFLAG_DC;
 
 	if (flags.is_low_batt)
 		sr_info("Low battery!");
diff --git a/src/hardware/brymen-dmm/protocol.c b/src/hardware/brymen-dmm/protocol.c
index 3e1b84c4..4cd61ad6 100644
--- a/src/hardware/brymen-dmm/protocol.c
+++ b/src/hardware/brymen-dmm/protocol.c
@@ -25,22 +25,27 @@ static void handle_packet(const uint8_t *buf, struct sr_dev_inst *sdi)
 	float floatval;
 	struct dev_context *devc;
 	struct sr_datafeed_packet packet;
-	struct sr_datafeed_analog_old analog;
+	struct sr_datafeed_analog analog;
+	struct sr_analog_encoding encoding;
+	struct sr_analog_meaning meaning;
+	struct sr_analog_spec spec;
 
 	devc = sdi->priv;
 
+	sr_analog_init(&analog, &encoding, &meaning, &spec, 0);
+
 	analog.num_samples = 1;
-	analog.mq = -1;
+	analog.meaning->mq = 0;
 
 	if (brymen_parse(buf, &floatval, &analog, NULL) != SR_OK)
 		return;
 	analog.data = &floatval;
 
-	analog.channels = sdi->channels;
+	analog.meaning->channels = sdi->channels;
 
-	if (analog.mq != -1) {
+	if (analog.meaning->mq != 0) {
 		/* Got a measurement. */
-		packet.type = SR_DF_ANALOG_OLD;
+		packet.type = SR_DF_ANALOG;
 		packet.payload = &analog;
 		sr_session_send(sdi, &packet);
 		sr_sw_limits_update_samples_read(&devc->sw_limits, 1);
diff --git a/src/hardware/brymen-dmm/protocol.h b/src/hardware/brymen-dmm/protocol.h
index be26cb96..7e02180e 100644
--- a/src/hardware/brymen-dmm/protocol.h
+++ b/src/hardware/brymen-dmm/protocol.h
@@ -64,7 +64,7 @@ SR_PRIV int brymen_packet_length(const uint8_t *buf, int *len);
 SR_PRIV gboolean brymen_packet_is_valid(const uint8_t *buf);
 
 SR_PRIV int brymen_parse(const uint8_t *buf, float *floatval,
-		struct sr_datafeed_analog_old *analog, void *info);
+		struct sr_datafeed_analog *analog, void *info);
 
 SR_PRIV int brymen_stream_detect(struct sr_serial_dev_inst *serial,
 				 uint8_t *buf, size_t *buflen,