From: Gerhard Sittig <redacted>
Date: Thu, 20 May 2021 21:46:17 +0000 (+0200)
Subject: scpi-dmm: add "switch to local" support for Agilent protocol
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=118da66f8d8ab1ce2a60f429654f533df7f9ee08;p=libsigrok.git

scpi-dmm: add "switch to local" support for Agilent protocol

Send "SYST:LOC" to Agilent protocol speaking scpi-dmm devices at the end
of the probe (--scan) as well as in close (--show, --samples, etc). This
ends "remote" and re-enters "local" mode after programmatic use. Should
increase usability, eliminates the need for manual intervention before
subsequent DMM use. Was tested with a Keysight DMM. Does not affect the
HP protocol speaking devices.
---

diff --git a/src/hardware/scpi-dmm/api.c b/src/hardware/scpi-dmm/api.c
index 520dc706..077debc7 100644
--- a/src/hardware/scpi-dmm/api.c
+++ b/src/hardware/scpi-dmm/api.c
@@ -50,6 +50,7 @@ static const uint32_t devopts_generic_range[] = {
 
 static const struct scpi_command cmdset_agilent[] = {
 	{ DMM_CMD_SETUP_REMOTE, "\n", },
+	{ DMM_CMD_SETUP_LOCAL, "SYST:LOC", },
 	{ DMM_CMD_SETUP_FUNC, "CONF:%s", },
 	{ DMM_CMD_QUERY_FUNC, "CONF?", },
 	{ DMM_CMD_START_ACQ, "INIT", },