From: Uwe Hermann Date: Thu, 23 Feb 2012 20:54:07 +0000 (+0100) Subject: sr: la8: Improve comments and messages a bit. X-Git-Tag: libsigrok-0.1.0~101 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=04254c3f833fd048668507fcd925b290c55664d6;p=libsigrok.git sr: la8: Improve comments and messages a bit. --- diff --git a/hardware/chronovu-la8/chronovu-la8.c b/hardware/chronovu-la8/chronovu-la8.c index 28aea6b2..da286e78 100644 --- a/hardware/chronovu-la8/chronovu-la8.c +++ b/hardware/chronovu-la8/chronovu-la8.c @@ -308,7 +308,7 @@ static int la8_close(struct context *ctx) * Close the ChronoVu LA8 USB port and reset the LA8 sequencer logic. * * @param ctx The struct containing private per-device-instance data. - * @return SR_OK upon success, SR_ERR upon failure. + * @return SR_OK upon success, SR_ERR_ARG upon invalid arguments. */ static int la8_close_usb_reset_sequencer(struct context *ctx) { @@ -328,12 +328,12 @@ static int la8_close_usb_reset_sequencer(struct context *ctx) if (ctx->ftdic->usb_dev) { /* Reset the LA8 sequencer logic, then wait 100ms. */ - sr_dbg("la8: resetting sequencer logic"); + sr_dbg("la8: Resetting sequencer logic."); (void) la8_write(ctx, buf, 8); /* Ignore errors. */ g_usleep(100 * 1000); /* Purge FTDI buffers, then reset and close the FTDI device. */ - sr_dbg("la8: purging buffers, resetting+closing FTDI device"); + sr_dbg("la8: Purging buffers, resetting+closing FTDI device."); /* Log errors, but ignore them (i.e., don't abort). */ if ((ret = ftdi_usb_purge_buffers(ctx->ftdic)) < 0) @@ -347,6 +347,7 @@ static int la8_close_usb_reset_sequencer(struct context *ctx) ret, ftdi_get_error_string(ctx->ftdic)); } + /* Close USB device, deinitialize and free the FTDI context. */ ftdi_free(ctx->ftdic); /* Returns void. */ ctx->ftdic = NULL; @@ -377,7 +378,7 @@ static int la8_reset(struct context *ctx) return SR_ERR_ARG; } - sr_dbg("la8: resetting the device"); + sr_dbg("la8: Resetting the device."); /* * Purge pending read data from the FTDI hardware FIFO until @@ -393,7 +394,7 @@ static int la8_reset(struct context *ctx) /* Reset the LA8 sequencer logic and close the USB port. */ (void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */ - sr_dbg("la8: device reset finished"); + sr_dbg("la8: Device reset finished."); return SR_OK; } @@ -451,8 +452,8 @@ static int configure_probes(struct context *ctx, GSList *probes) } } - sr_dbg("la8: %s: trigger_mask = 0x%x, trigger_pattern = 0x%x", - __func__, ctx->trigger_mask, ctx->trigger_pattern); + sr_dbg("la8: trigger_mask = 0x%x, trigger_pattern = 0x%x", + ctx->trigger_mask, ctx->trigger_pattern); return SR_OK; } @@ -506,7 +507,8 @@ static int hw_init(const char *devinfo) (void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */ goto err_free_ftdic; } - sr_dbg("la8: found device"); + sr_dbg("la8: Found LA8 device (%04x:%04x).", USB_VENDOR_ID, + USB_PRODUCT_ID); /* Register the device with libsigrok. */ sdi = sr_dev_inst_new(0, SR_ST_INITIALIZING, @@ -520,7 +522,7 @@ static int hw_init(const char *devinfo) dev_insts = g_slist_append(dev_insts, sdi); - sr_spew("la8: %s finished successfully", __func__); + sr_spew("la8: Device init successful."); /* Close device. We'll reopen it again when we need it. */ (void) la8_close(ctx); /* Log, but ignore errors. */ @@ -556,7 +558,8 @@ static int hw_dev_open(int dev_index) return SR_ERR; /* TODO: SR_ERR_ARG? */ } - sr_dbg("la8: opening device"); + sr_dbg("la8: Opening LA8 device (%04x:%04x).", USB_VENDOR_ID, + USB_PRODUCT_ID); /* Open the device. */ if ((ret = ftdi_usb_open_desc(ctx->ftdic, USB_VENDOR_ID, @@ -566,7 +569,7 @@ static int hw_dev_open(int dev_index) (void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */ return SR_ERR; } - sr_dbg("la8: device opened successfully"); + sr_dbg("la8: Device opened successfully."); /* Purge RX/TX buffers in the FTDI chip. */ if ((ret = ftdi_usb_purge_buffers(ctx->ftdic)) < 0) { @@ -575,7 +578,7 @@ static int hw_dev_open(int dev_index) (void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */ goto err_dev_open_close_ftdic; } - sr_dbg("la8: FTDI buffers purged successfully"); + sr_dbg("la8: FTDI buffers purged successfully."); /* Enable flow control in the FTDI chip. */ if ((ret = ftdi_setflowctrl(ctx->ftdic, SIO_RTS_CTS_HS)) < 0) { @@ -584,7 +587,7 @@ static int hw_dev_open(int dev_index) (void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */ goto err_dev_open_close_ftdic; } - sr_dbg("la8: FTDI flow control enabled successfully"); + sr_dbg("la8: FTDI flow control enabled successfully."); /* Wait 100ms. */ g_usleep(100 * 1000); @@ -606,7 +609,7 @@ static int set_samplerate(struct sr_dev_inst *sdi, uint64_t samplerate) ctx = sdi->priv; - sr_spew("la8: setting samplerate"); + sr_spew("la8: Trying to set samplerate to %" PRIu64 "Hz.", samplerate); fill_supported_samplerates_if_needed(); @@ -617,7 +620,7 @@ static int set_samplerate(struct sr_dev_inst *sdi, uint64_t samplerate) /* Set the new samplerate. */ ctx->cur_samplerate = samplerate; - sr_dbg("la8: samplerate set to %" PRIu64 "Hz", ctx->cur_samplerate); + sr_dbg("la8: Samplerate set to %" PRIu64 "Hz.", ctx->cur_samplerate); return SR_OK; } @@ -637,19 +640,19 @@ static int hw_dev_close(int dev_index) return SR_ERR; /* TODO: SR_ERR_ARG? */ } - sr_dbg("la8: closing device"); + sr_dbg("la8: Closing device."); if (sdi->status == SR_ST_ACTIVE) { - sr_dbg("la8: %s: status ACTIVE, closing device", __func__); + sr_dbg("la8: Status ACTIVE, closing device."); /* TODO: Really ignore errors here, or return SR_ERR? */ (void) la8_close_usb_reset_sequencer(ctx); /* Ignore errors. */ } else { - sr_spew("la8: %s: status not ACTIVE, nothing to do", __func__); + sr_spew("la8: Status not ACTIVE, nothing to do."); } sdi->status = SR_ST_INACTIVE; - sr_dbg("la8: %s: freeing sample buffers", __func__); + sr_dbg("la8: Freeing sample buffer."); g_free(ctx->final_buf); return SR_OK; @@ -683,8 +686,6 @@ static void *hw_dev_info_get(int dev_index, int dev_info_id) struct context *ctx; void *info; - sr_spew("la8: entering %s", __func__); - if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) { sr_err("la8: %s: sdi was NULL", __func__); return NULL; @@ -695,25 +696,37 @@ static void *hw_dev_info_get(int dev_index, int dev_info_id) return NULL; } + sr_spew("la8: %s: dev_index %d, dev_info_id %d.", __func__, + dev_index, dev_info_id); + switch (dev_info_id) { case SR_DI_INST: info = sdi; + sr_spew("la8: %s: Returning sdi.", __func__); break; case SR_DI_NUM_PROBES: info = GINT_TO_POINTER(NUM_PROBES); + sr_spew("la8: %s: Returning number of probes: %d.", __func__, + NUM_PROBES); break; case SR_DI_PROBE_NAMES: info = probe_names; + sr_spew("la8: %s: Returning probenames.", __func__); break; case SR_DI_SAMPLERATES: fill_supported_samplerates_if_needed(); info = &samplerates; + sr_spew("la8: %s: Returning samplerates.", __func__); break; case SR_DI_TRIGGER_TYPES: info = (char *)TRIGGER_TYPES; + sr_spew("la8: %s: Returning trigger types: %s.", __func__, + TRIGGER_TYPES); break; case SR_DI_CUR_SAMPLERATE: info = &ctx->cur_samplerate; + sr_spew("la8: %s: Returning samplerate: %" PRIu64 "Hz.", + __func__, ctx->cur_samplerate); break; default: /* Unknown device info ID, return NULL. */ @@ -734,14 +747,14 @@ static int hw_dev_status_get(int dev_index) return SR_ST_NOT_FOUND; } - sr_dbg("la8: %s: returning status %d", __func__, sdi->status); + sr_dbg("la8: Returning status: %d.", sdi->status); return sdi->status; } static int *hw_hwcap_get_all(void) { - sr_spew("la8: entering %s", __func__); + sr_spew("la8: Returning list of device capabilities."); return hwcaps; } @@ -751,8 +764,6 @@ static int hw_dev_config_set(int dev_index, int hwcap, void *value) struct sr_dev_inst *sdi; struct context *ctx; - sr_spew("la8: entering %s", __func__); - if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) { sr_err("la8: %s: sdi was NULL", __func__); return SR_ERR; /* TODO: SR_ERR_ARG? */ @@ -763,21 +774,25 @@ static int hw_dev_config_set(int dev_index, int hwcap, void *value) return SR_ERR; /* TODO: SR_ERR_ARG? */ } + sr_spew("la8: %s: dev_index %d, hwcap %d", __func__, dev_index, hwcap); + switch (hwcap) { case SR_HWCAP_SAMPLERATE: - if (set_samplerate(sdi, *(uint64_t *)value) == SR_ERR) + if (set_samplerate(sdi, *(uint64_t *)value) == SR_ERR) { + sr_err("la8: %s: setting samplerate failed.", __func__); return SR_ERR; + } sr_dbg("la8: SAMPLERATE = %" PRIu64, ctx->cur_samplerate); break; case SR_HWCAP_PROBECONFIG: if (configure_probes(ctx, (GSList *)value) != SR_OK) { - sr_err("la8: %s: probe config failed", __func__); + sr_err("la8: %s: probe config failed.", __func__); return SR_ERR; } break; case SR_HWCAP_LIMIT_MSEC: if (*(uint64_t *)value == 0) { - sr_err("la8: %s: LIMIT_MSEC can't be 0", __func__); + sr_err("la8: %s: LIMIT_MSEC can't be 0.", __func__); return SR_ERR; } ctx->limit_msec = *(uint64_t *)value; @@ -785,7 +800,7 @@ static int hw_dev_config_set(int dev_index, int hwcap, void *value) break; case SR_HWCAP_LIMIT_SAMPLES: if (*(uint64_t *)value < MIN_NUM_SAMPLES) { - sr_err("la8: %s: LIMIT_SAMPLES too small", __func__); + sr_err("la8: %s: LIMIT_SAMPLES too small.", __func__); return SR_ERR; } ctx->limit_samples = *(uint64_t *)value; @@ -793,7 +808,7 @@ static int hw_dev_config_set(int dev_index, int hwcap, void *value) break; default: /* Unknown capability, return SR_ERR. */ - sr_err("la8: %s: Unknown capability", __func__); + sr_err("la8: %s: Unknown capability.", __func__); return SR_ERR; break; } @@ -804,7 +819,8 @@ static int hw_dev_config_set(int dev_index, int hwcap, void *value) /** * Get a block of data from the LA8. * - * @param ctx The struct containing private per-device-instance data. + * @param ctx The struct containing private per-device-instance data. Must not + * be NULL. ctx->ftdic must not be NULL either. * @return SR_OK upon success, or SR_ERR upon errors. */ static int la8_read_block(struct context *ctx) @@ -814,14 +830,14 @@ static int la8_read_block(struct context *ctx) /* Note: Caller checked that ctx and ctx->ftdic != NULL. */ - sr_spew("la8: %s: reading block %d", __func__, ctx->block_counter); + sr_spew("la8: Reading block %d.", ctx->block_counter); bytes_read = la8_read(ctx, ctx->mangled_buf, BS); /* If first block read got 0 bytes, retry until success or timeout. */ if ((bytes_read == 0) && (ctx->block_counter == 0)) { do { - sr_spew("la8: %s: reading block 0 again", __func__); + sr_spew("la8: Reading block 0 (again)."); bytes_read = la8_read(ctx, ctx->mangled_buf, BS); /* TODO: How to handle read errors here? */ now = time(NULL); @@ -830,13 +846,13 @@ static int la8_read_block(struct context *ctx) /* Check if block read was successful or a timeout occured. */ if (bytes_read != BS) { - sr_err("la8: %s: trigger timed out", __func__); + sr_err("la8: Trigger timed out. Bytes read: %d.", bytes_read); (void) la8_reset(ctx); /* Ignore errors. */ return SR_ERR; } /* De-mangle the data. */ - sr_spew("la8: de-mangling samples of block %d", ctx->block_counter); + sr_spew("la8: Demangling block %d.", ctx->block_counter); byte_offset = ctx->block_counter * BS; m = byte_offset / (1024 * 1024); mi = m * (1024 * 1024); @@ -981,7 +997,7 @@ static int receive_data(int fd, int revents, void *session_data) return TRUE; } - sr_dbg("la8: sampling finished, sending data to session bus now"); + sr_dbg("la8: Sampling finished, sending data to session bus now."); /* All data was received and demangled, send it to the session bus. */ for (i = 0; i < NUM_BLOCKS; i++) @@ -1002,8 +1018,6 @@ static int hw_dev_acquisition_start(int dev_index, gpointer session_data) uint8_t buf[4]; int bytes_written; - sr_spew("la8: entering %s", __func__); - if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) { sr_err("la8: %s: sdi was NULL", __func__); return SR_ERR; /* TODO: SR_ERR_ARG? */ @@ -1025,6 +1039,8 @@ static int hw_dev_acquisition_start(int dev_index, gpointer session_data) return SR_ERR; } + sr_dbg("la8: Starting acquisition."); + /* Fill acquisition parameters into buf[]. */ buf[0] = ctx->divcount; buf[1] = 0xff; /* This byte must always be 0xff. */ @@ -1035,19 +1051,19 @@ static int hw_dev_acquisition_start(int dev_index, gpointer session_data) bytes_written = la8_write(ctx, buf, 4); if (bytes_written < 0) { - sr_err("la8: acquisition failed to start"); + sr_err("la8: Acquisition failed to start."); return SR_ERR; } else if (bytes_written != 4) { - sr_err("la8: acquisition failed to start"); + sr_err("la8: Acquisition failed to start."); return SR_ERR; /* TODO: Other error and return code? */ } - sr_dbg("la8: acquisition started successfully"); + sr_dbg("la8: Acquisition started successfully."); ctx->session_id = session_data; /* Send header packet to the session bus. */ - sr_dbg("la8: %s: sending SR_DF_HEADER", __func__); + sr_dbg("la8: Sending SR_DF_HEADER."); packet.type = SR_DF_HEADER; packet.payload = &header; header.feed_version = 1; @@ -1074,7 +1090,7 @@ static int hw_dev_acquisition_stop(int dev_index, gpointer session_data) struct context *ctx; struct sr_datafeed_packet packet; - sr_dbg("la8: stopping acquisition"); + sr_dbg("la8: Stopping acquisition."); if (!(sdi = sr_dev_inst_get(dev_insts, dev_index))) { sr_err("la8: %s: sdi was NULL", __func__); @@ -1087,7 +1103,7 @@ static int hw_dev_acquisition_stop(int dev_index, gpointer session_data) } /* Send end packet to the session bus. */ - sr_dbg("la8: %s: sending SR_DF_END", __func__); + sr_dbg("la8: Sending SR_DF_END."); packet.type = SR_DF_END; sr_session_bus(session_data, &packet);