From: Bert Vermeulen <redacted>
Date: Tue, 27 May 2014 22:21:23 +0000 (+0200)
Subject: ikalogic-scanalogic2: Use new trigger API.
X-Git-Tag: libsigrok-0.4.0~1303
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=02d5c0d8ea5b398962b51952928d31e75c4a8f8d;p=libsigrok.git

ikalogic-scanalogic2: Use new trigger API.
---

diff --git a/hardware/ikalogic-scanalogic2/api.c b/hardware/ikalogic-scanalogic2/api.c
index e586011e..fd0f2176 100644
--- a/hardware/ikalogic-scanalogic2/api.c
+++ b/hardware/ikalogic-scanalogic2/api.c
@@ -23,10 +23,16 @@ static const int hwcaps[] = {
 	SR_CONF_LOGIC_ANALYZER,
 	SR_CONF_SAMPLERATE,
 	SR_CONF_LIMIT_SAMPLES,
-	SR_CONF_TRIGGER_TYPE,
+	SR_CONF_TRIGGER_MATCH,
 	SR_CONF_CAPTURE_RATIO,
 };
 
+static const int32_t trigger_matches[] = {
+	SR_TRIGGER_RISING,
+	SR_TRIGGER_FALLING,
+	SR_TRIGGER_EDGE,
+};
+
 SR_PRIV const uint64_t sl2_samplerates[NUM_SAMPLERATES] = {
 	SR_KHZ(1.25),
 	SR_KHZ(10),
@@ -390,8 +396,10 @@ static int config_list(int key, GVariant **data, const struct sr_dev_inst *sdi,
 		g_variant_builder_add(&gvb, "{sv}", "samplerates", gvar);
 		*data = g_variant_builder_end(&gvb);
 		break;
-	case SR_CONF_TRIGGER_TYPE:
-		*data = g_variant_new_string(TRIGGER_TYPES);
+	case SR_CONF_TRIGGER_MATCH:
+		*data = g_variant_new_fixed_array(G_VARIANT_TYPE_INT32,
+				trigger_matches, ARRAY_SIZE(trigger_matches),
+				sizeof(int32_t));
 		break;
 	case SR_CONF_LIMIT_SAMPLES:
 		grange[0] = g_variant_new_uint64(0);
@@ -431,7 +439,7 @@ static int dev_acquisition_start(const struct sr_dev_inst *sdi, void *cb_data)
 	 * The trigger must be configured first because the calculation of the
 	 * pre and post trigger samples depends on a configured trigger.
 	 */
-	sl2_configure_trigger(sdi);
+	sl2_convert_trigger(sdi);
 	sl2_calculate_trigger_samples(sdi);
 
 	trigger_bytes = devc->pre_trigger_bytes + devc->post_trigger_bytes;
diff --git a/hardware/ikalogic-scanalogic2/protocol.c b/hardware/ikalogic-scanalogic2/protocol.c
index b99709c6..abd3952e 100644
--- a/hardware/ikalogic-scanalogic2/protocol.c
+++ b/hardware/ikalogic-scanalogic2/protocol.c
@@ -479,14 +479,14 @@ SR_PRIV int sl2_set_limit_samples(const struct sr_dev_inst *sdi,
 	return SR_OK;
 }
 
-SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi)
+SR_PRIV int sl2_convert_trigger(const struct sr_dev_inst *sdi)
 {
 	struct dev_context *devc;
-	struct sr_channel *ch;
-	uint8_t trigger_type;
-	int channel_index, num_triggers_anyedge;
-	char *trigger;
-	GSList *l;
+	struct sr_trigger *trigger;
+	struct sr_trigger_stage *stage;
+	struct sr_trigger_match *match;
+	const GSList *l, *m;
+	int num_triggers_anyedge;
 
 	devc = sdi->priv;
 
@@ -494,32 +494,36 @@ SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi)
 	devc->trigger_channel = TRIGGER_CHANNEL_0;
 	devc->trigger_type = TRIGGER_TYPE_NONE;
 
-	num_triggers_anyedge = 0;
-
-	for (l = sdi->channels, channel_index = 0; l; l = l->next, channel_index++) {
-		ch = l->data;
-		trigger = ch->trigger;
+	if (!(trigger = sr_session_trigger_get()))
+		return SR_OK;
 
-		if (!trigger || !ch->enabled)
-			continue;
+	if (g_slist_length(trigger->stages) > 1) {
+		sr_err("This device only supports 1 trigger stage.");
+		return SR_ERR;
+	}
 
-		switch (*trigger) {
-		case 'r':
-			trigger_type = TRIGGER_TYPE_POSEDGE;
-			break;
-		case 'f':
-			trigger_type = TRIGGER_TYPE_NEGEDGE;
-			break;
-		case 'c':
-			trigger_type = TRIGGER_TYPE_ANYEDGE;
-			num_triggers_anyedge++;
-			break;
-		default:
-			continue;
+	num_triggers_anyedge = 0;
+	for (l = trigger->stages; l; l = l->next) {
+		stage = l->data;
+		for (m = stage->matches; m; m = m->next) {
+			match = m->data;
+			if (!match->channel->enabled)
+				/* Ignore disabled channels with a trigger. */
+				continue;
+			devc->trigger_channel = match->channel->index + 1;
+			switch (match->match) {
+			case SR_TRIGGER_RISING:
+				devc->trigger_type = TRIGGER_TYPE_POSEDGE;
+				break;
+			case SR_TRIGGER_FALLING:
+				devc->trigger_type = TRIGGER_TYPE_NEGEDGE;
+				break;
+			case SR_TRIGGER_EDGE:
+				devc->trigger_type = TRIGGER_TYPE_ANYEDGE;
+				num_triggers_anyedge++;
+				break;
+			}
 		}
-
-		devc->trigger_channel = channel_index + 1;
-		devc->trigger_type = trigger_type;
 	}
 
 	/*
@@ -533,6 +537,8 @@ SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi)
 
 	sr_dbg("Trigger set to channel 0x%02x and type 0x%02x.",
 		devc->trigger_channel, devc->trigger_type);
+
+	return SR_OK;
 }
 
 SR_PRIV int sl2_set_capture_ratio(const struct sr_dev_inst *sdi,
diff --git a/hardware/ikalogic-scanalogic2/protocol.h b/hardware/ikalogic-scanalogic2/protocol.h
index 3b411e69..5e7c7b3b 100644
--- a/hardware/ikalogic-scanalogic2/protocol.h
+++ b/hardware/ikalogic-scanalogic2/protocol.h
@@ -49,8 +49,6 @@
 #define NUM_SAMPLERATES			11
 #define NUM_CHANNELS			4
 
-#define TRIGGER_TYPES			"rfc"
-
 /*
  * Number of sample bytes and samples the device can acquire. Note that the
  * vendor software can acquire 32736 sample bytes only but the device is capable
@@ -225,7 +223,7 @@ SR_PRIV int sl2_set_samplerate(const struct sr_dev_inst *sdi,
 		uint64_t samplerate);
 SR_PRIV int sl2_set_limit_samples(const struct sr_dev_inst *sdi,
 				  uint64_t limit_samples);
-SR_PRIV void sl2_configure_trigger(const struct sr_dev_inst *sdi);
+SR_PRIV int sl2_convert_trigger(const struct sr_dev_inst *sdi);
 SR_PRIV int sl2_set_capture_ratio(const struct sr_dev_inst *sdi,
 				  uint64_t capture_ratio);
 SR_PRIV int sl2_set_after_trigger_delay(const struct sr_dev_inst *sdi,