From: Frank Stettner <redacted>
Date: Fri, 1 Feb 2019 11:18:46 +0000 (+0100)
Subject: hp-3478a: Check via GPIB serial poll if new data is available.
X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=02d4db356287ca58e0d8cc624199280ad91ee15c;p=libsigrok.git

hp-3478a: Check via GPIB serial poll if new data is available.

When just reading the data without check, the bus is blocked until new
data is available.
---

diff --git a/src/hardware/hp-3478a/protocol.c b/src/hardware/hp-3478a/protocol.c
index 3ddce588..6767bf0a 100644
--- a/src/hardware/hp-3478a/protocol.c
+++ b/src/hardware/hp-3478a/protocol.c
@@ -406,6 +406,7 @@ SR_PRIV int hp_3478a_receive_data(int fd, int revents, void *cb_data)
 	struct sr_scpi_dev_inst *scpi;
 	struct sr_dev_inst *sdi;
 	struct dev_context *devc;
+	char status_register;
 
 	(void)fd;
 	(void)revents;
@@ -416,18 +417,28 @@ SR_PRIV int hp_3478a_receive_data(int fd, int revents, void *cb_data)
 	scpi = sdi->conn;
 
 	/*
-	 * This is necessary to get the actual range for the encoding digits.
-	 * When SPoll is implemmented, this can be done via SPoll.
+	 * TODO: Wait for SRQ from the DMM when a new measurement is available.
+	 *       For now, we don't wait for a SRQ, but just do a SPoll and
+	 *       check the Data Ready bit (0x01).
+	 *       This is necessary, because (1) reading a value will block the
+	 *       bus until a measurement is available and (2) when switching
+	 *       ranges, there could be a timeout.
 	 */
-	if (hp_3478a_get_status_bytes(sdi) != SR_OK)
+	if (sr_scpi_gpib_spoll(scpi, &status_register) != SR_OK)
+		return FALSE;
+	if (!(((uint8_t)status_register) & 0x01))
+		return TRUE;
+
+	/* Get a reading from the DMM. */
+	if (sr_scpi_get_double(scpi, NULL, &devc->measurement) != SR_OK)
 		return FALSE;
 
 	/*
-	 * TODO: Implement GPIB-SPoll, to get notified by a SRQ when a new
-	 *       measurement is available. This is necessary, because when
-	 *       switching ranges, there could be a timeout.
+	 * This is necessary to get the actual range for the encoding digits.
+	 * Must be called after reading the value, because it resets the
+	 * status register!
 	 */
-	if (sr_scpi_get_double(scpi, NULL, &devc->measurement) != SR_OK)
+	if (hp_3478a_get_status_bytes(sdi) != SR_OK)
 		return FALSE;
 
 	acq_send_measurement(sdi);
diff --git a/src/scpi.h b/src/scpi.h
index 13b2d301..eeee9a55 100644
--- a/src/scpi.h
+++ b/src/scpi.h
@@ -163,4 +163,10 @@ SR_PRIV int sr_scpi_cmd_resp(const struct sr_dev_inst *sdi,
 		int channel_command, const char *channel_name,
 		GVariant **gvar, const GVariantType *gvtype, int command, ...);
 
+/*--- GPIB only functions ---------------------------------------------------*/
+
+#ifdef HAVE_LIBGPIB
+SR_PRIV int sr_scpi_gpib_spoll(struct sr_scpi_dev_inst *scpi, char *buf);
+#endif
+
 #endif
diff --git a/src/scpi/scpi_libgpib.c b/src/scpi/scpi_libgpib.c
index 2f3256be..8f200e7d 100644
--- a/src/scpi/scpi_libgpib.c
+++ b/src/scpi/scpi_libgpib.c
@@ -155,6 +155,22 @@ static void scpi_gpib_free(void *priv)
 	g_free(gscpi->name);
 }
 
+SR_PRIV int sr_scpi_gpib_spoll(struct sr_scpi_dev_inst *scpi, char *buf)
+{
+	struct scpi_gpib *gscpi = scpi->priv;
+
+	ibrsp(gscpi->descriptor, buf);
+
+	if (ibsta & ERR) {
+		sr_err("Error while serial polling: iberr = %s.",
+			gpib_error_string(iberr));
+		return SR_ERR;
+	}
+	sr_spew("Successful serial poll: 0x%x", (uint8_t)buf[0]);
+
+	return SR_OK;
+}
+
 SR_PRIV const struct sr_scpi_dev_inst scpi_libgpib_dev = {
 	.name = "GPIB",
 	.prefix = "libgpib",