From: Bert Vermeulen Date: Sun, 19 Jan 2014 16:22:19 +0000 (+0100) Subject: Don't use SR_CONF_MAX_UNCOMPRESSED_SAMPLES. X-Git-Tag: sigrok-cli-0.5.0~45 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=02c659351bda97f77922356f48a7eed1d3137011;p=sigrok-cli.git Don't use SR_CONF_MAX_UNCOMPRESSED_SAMPLES. This uses the new sr_config_list(SR_CONF_LIMIT_SAMPLES) method to get the same information. --- diff --git a/session.c b/session.c index 4a31c42..82efee0 100644 --- a/session.c +++ b/session.c @@ -551,7 +551,7 @@ void run_session(void) GHashTable *devargs; GVariant *gvar; struct sr_dev_inst *sdi; - uint64_t max_samples; + uint64_t min_samples, max_samples; int max_probes, i; char **triggerlist; @@ -630,12 +630,16 @@ void run_session(void) sr_session_destroy(); return; } - if (sr_config_get(sdi->driver, sdi, NULL, - SR_CONF_MAX_UNCOMPRESSED_SAMPLES, &gvar) == SR_OK) { + if (sr_config_list(sdi->driver, sdi, NULL, + SR_CONF_LIMIT_SAMPLES, &gvar) == SR_OK) { /* The device has no compression, or compression is turned * off, and publishes its sample memory size. */ - max_samples = g_variant_get_uint64(gvar); + g_variant_get(gvar, "(tt)", &min_samples, &max_samples); g_variant_unref(gvar); + if (limit_samples < min_samples) { + g_critical("The device stores at least %"PRIu64 + " samples with the current settings.", min_samples); + } if (limit_samples > max_samples) { g_critical("The device can store only %"PRIu64 " samples with the current settings.", max_samples); diff --git a/show.c b/show.c index 6b2f985..e1a5bad 100644 --- a/show.c +++ b/show.c @@ -187,7 +187,11 @@ void show_dev_detail(void) g_variant_unref(gvar_opts); } + /* Selected probes and probe group may affect which options are + * returned, or which values for them. */ + select_probes(sdi); probe_group = select_probe_group(sdi); + if ((sr_config_list(sdi->driver, sdi, probe_group, SR_CONF_DEVICE_OPTIONS, &gvar_opts)) != SR_OK) /* Driver supports no device instance options. */ @@ -235,6 +239,21 @@ void show_dev_detail(void) printf("\n"); g_variant_unref(gvar); + } else if (srci->key == SR_CONF_LIMIT_SAMPLES) { + /* If implemented in config_list(), this denotes the + * maximum number of samples a device can send. This + * really applies only to logic analyzers, and then + * only to those that don't support compression, or + * have it turned off by default. The values returned + * are the low/high limits. */ + if (sr_config_list(sdi->driver, sdi, probe_group, srci->key, + &gvar) != SR_OK) { + continue; + } + g_variant_get(gvar, "(tt)", &low, &high); + g_variant_unref(gvar); + printf(" Maximum number of samples: %"PRIu64"\n", high); + } else if (srci->key == SR_CONF_SAMPLERATE) { /* Supported samplerates */ printf(" %s", srci->id);