From: Soeren Apel Date: Thu, 29 Jul 2021 21:33:32 +0000 (+0200) Subject: rc_encode: Add support for EV1527, RT1527, FP1527 and HS1527 X-Git-Url: https://sigrok.org/gitaction?a=commitdiff_plain;h=02aa01ad5f05f2730309200abda0ac75d3721e1d;p=libsigrokdecode.git rc_encode: Add support for EV1527, RT1527, FP1527 and HS1527 --- diff --git a/decoders/rc_encode/__init__.py b/decoders/rc_encode/__init__.py index db78dc1..7cc7ab5 100644 --- a/decoders/rc_encode/__init__.py +++ b/decoders/rc_encode/__init__.py @@ -26,11 +26,15 @@ pressed and address settings into a series of pulses which is then transmitted over whatever frequency and modulation that the designer chooses. These devices operate at a number of frequencies including 433MHz. -This PD should also decode the HX2262 and SC5262 which are equivalents. +This PD should also decode the HX2262 and SC5262 which are equivalents, as +well as the 2272 variants of these ICs. Support for the EV1527, RT1527, FP1527 +and HS1527 is also present. -The decoder also contains some additional decoding for a Maplin L95AR -remote control and will turn the received signal into which button was -pressed and what the address code DIP switches are set to. +The decoder can additionaly decoding the Maplin L95AR remote control and will +turn the received signal into which button was pressed and what the address +code DIP switches are set to. +Please contact the sigrok team if you want decoding for further remote +controls to be added. ''' from .pd import Decoder diff --git a/decoders/rc_encode/pd.py b/decoders/rc_encode/pd.py index 0d7cc8c..31727bd 100644 --- a/decoders/rc_encode/pd.py +++ b/decoders/rc_encode/pd.py @@ -21,43 +21,63 @@ import sigrokdecode as srd bitvals = ('0', '1', 'f', 'U') -def decode_bit(edges): - # Datasheet says long pulse is 3 times short pulse. - lmin = 2 # long min multiplier - lmax = 5 # long max multiplier - eqmin = 0.5 # equal min multiplier - eqmax = 1.5 # equal max multiplier - if ( # 0 -___-___ - (edges[1] >= edges[0] * lmin and edges[1] <= edges[0] * lmax) and - (edges[2] >= edges[0] * eqmin and edges[2] <= edges[0] * eqmax) and - (edges[3] >= edges[0] * lmin and edges[3] <= edges[0] * lmax)): - return '0' - elif ( # 1 ---_---_ - (edges[0] >= edges[1] * lmin and edges[0] <= edges[1] * lmax) and - (edges[0] >= edges[2] * eqmin and edges[0] <= edges[2] * eqmax) and - (edges[0] >= edges[3] * lmin and edges[0] <= edges[3] * lmax)): - return '1' - elif ( # float ---_-___ - (edges[1] >= edges[0] * lmin and edges[1] <= edges[0] * lmax) and - (edges[2] >= edges[0] * lmin and edges[2] <= edges[0]* lmax) and - (edges[3] >= edges[0] * eqmin and edges[3] <= edges[0] * eqmax)): - return 'f' - else: - return 'U' - -def pinlabels(bit_count): - if bit_count <= 6: - return 'A%i' % (bit_count - 1) - else: - return 'A%i/D%i' % (bit_count - 1, 12 - bit_count) +def decode_bit(edges, pulses_per_bit): + if pulses_per_bit == 2: + # Datasheet says long pulse is 3 times short pulse. + lmin = 1.5 # long min multiplier + lmax = 5 # long max multiplier + if (edges[1] >= edges[0] * lmin and edges[1] <= edges[0] * lmax): # 0 -___ + return '0' + elif (edges[0] >= edges[1] * lmin and edges[0] <= edges[1] * lmax): # 1 ---_ + return '1' + # No float type for this line encoding + else: + return 'U' + + if pulses_per_bit == 4: + # Datasheet says long pulse is 3 times short pulse. + lmin = 2 # long min multiplier + lmax = 5 # long max multiplier + eqmin = 0.5 # equal min multiplier + eqmax = 1.5 # equal max multiplier + if ( # 0 -___-___ + (edges[1] >= edges[0] * lmin and edges[1] <= edges[0] * lmax) and + (edges[2] >= edges[0] * eqmin and edges[2] <= edges[0] * eqmax) and + (edges[3] >= edges[0] * lmin and edges[3] <= edges[0] * lmax)): + return '0' + elif ( # 1 ---_---_ + (edges[0] >= edges[1] * lmin and edges[0] <= edges[1] * lmax) and + (edges[0] >= edges[2] * eqmin and edges[0] <= edges[2] * eqmax) and + (edges[0] >= edges[3] * lmin and edges[0] <= edges[3] * lmax)): + return '1' + elif ( # float ---_-___ + (edges[1] >= edges[0] * lmin and edges[1] <= edges[0] * lmax) and + (edges[2] >= edges[0] * lmin and edges[2] <= edges[0]* lmax) and + (edges[3] >= edges[0] * eqmin and edges[3] <= edges[0] * eqmax)): + return 'f' + else: + return 'U' + +def pinlabels(bit_count, packet_bit_count): + if packet_bit_count == 12: + if bit_count <= 6: + return 'A%i' % (bit_count - 1) + else: + return 'A%i/D%i' % (bit_count - 1, 12 - bit_count) + + if packet_bit_count == 24: + if bit_count <= 20: + return 'A%i' % (bit_count - 1) + else: + return 'D%i' % (bit_count - 21) def decode_model(model, bits): if model == 'maplin_l95ar': - address = 'Addr' # Address pins A0 to A5 + address = 'Addr' # Address bits A0 to A5 for i in range(0, 6): address += ' %i:' % (i + 1) + ('on' if bits[i][0] == '0' else 'off') button = 'Button' - # Button pins A6/D5 to A11/D0 + # Button bits A6/D5 to A11/D0 if bits[6][0] == '0' and bits[11][0] == '0': button += ' A ON/OFF' elif bits[7][0] == '0' and bits[11][0] == '0': @@ -68,15 +88,36 @@ def decode_model(model, bits): button += ' D ON/OFF' else: button += ' Unknown' - return ['%s' % address, bits[0][1], bits[5][2], \ - '%s' % button, bits[6][1], bits[11][2]] + return [address, bits[0][1], bits[5][2], \ + button, bits[6][1], bits[11][2]] + + if model == 'xx1527': + addr = 0 + addr_valid = 1 + for i in range(0, 20): + if bits[i][0] != 'U': + addr += int(bits[i][0]) * 2 ** i + else: + addr_valid = 0 + + if addr_valid == 1: + address = 'Address 0x%X %X %X' % (addr & 0xFF, (addr >> 8) & 0xFF, addr >> 16) + else: + address = 'Invalid address as not all bits are 0 or 1' + + output = ' K0 = ' + bits[20][0] + ',' + output += ' K1 = ' + bits[21][0] + ',' + output += ' K2 = ' + bits[22][0] + ',' + output += ' K3 = ' + bits[23][0] + return [address, bits[0][1], bits[19][2], \ + output, bits[20][1], bits[23][2]] class Decoder(srd.Decoder): api_version = 3 id = 'rc_encode' name = 'RC encode' longname = 'Remote control encoder' - desc = 'PT2262/HX2262/SC5262 remote control encoder protocol.' + desc = 'PT22x2/HX22x2/SC52x2 and xx1527 remote control encoder protocol.' license = 'gplv2+' inputs = ['logic'] outputs = [] @@ -100,8 +141,8 @@ class Decoder(srd.Decoder): ('code-words', 'Code words', (6, 7)), ) options = ( - {'id': 'remote', 'desc': 'Remote', 'default': 'none', - 'values': ('none', 'maplin_l95ar')}, + {'id': 'linecoding', 'desc': 'Encoding', 'default': 'SC52x2/HX22x2', 'values': ('SC52x2/HX22x2', 'xx1527')}, + {'id': 'remote', 'desc': 'Remote', 'default': 'none', 'values': ('none', 'maplin_l95ar')}, ) def __init__(self): @@ -120,6 +161,13 @@ class Decoder(srd.Decoder): def start(self): self.out_ann = self.register(srd.OUTPUT_ANN) self.model = self.options['remote'] + if self.options['linecoding'] == 'xx1527': + self.pulses_per_bit = 2 + self.packet_bits = 24 + self.model = 'xx1527' + else: + self.pulses_per_bit = 4 # Each bit is repeated + self.packet_bits = 12 def putx(self, data): self.put(self.ss, self.es, self.out_ann, data) @@ -134,20 +182,20 @@ class Decoder(srd.Decoder): self.ss = self.samplenum continue - if self.bit_count < 12: # Decode A0 to A11. + if self.bit_count < self.packet_bits: # Decode A0 to A11 / A23. self.bit_count += 1 - for i in range(0, 4): # Get four pulses for each bit. + for i in range(0, self.pulses_per_bit): if i > 0: - pin = self.wait({0: 'e'}) # Get next 3 edges. + pin = self.wait({0: 'e'}) # Get next edges if we need more. samples = self.samplenum - self.samplenumber_last self.pulses.append(samples) # Save the pulse width. self.samplenumber_last = self.samplenum self.es = self.samplenum - self.bits.append([decode_bit(self.pulses), self.ss, + self.bits.append([decode_bit(self.pulses, self.pulses_per_bit), self.ss, self.es]) # Save states and times. - idx = bitvals.index(decode_bit(self.pulses)) - self.putx([idx, [decode_bit(self.pulses)]]) # Write decoded bit. - self.putx([5, [pinlabels(self.bit_count)]]) # Write pin labels. + idx = bitvals.index(decode_bit(self.pulses, self.pulses_per_bit)) + self.putx([idx, [decode_bit(self.pulses, self.pulses_per_bit)]]) # Write decoded bit. + self.putx([5, [pinlabels(self.bit_count, self.packet_bits)]]) # Write pin labels. self.pulses = [] self.ss = self.samplenum else: