/configure
/configure.lineno
/libserialport-*.tar.*
-/libserialport.h
/libserialport.pc
/libtool
stamp-h?
AC_INIT([libserialport], [sp_package_version], [martin-libserialport@earth.li],
[libserialport], [http://sigrok.org/wiki/Libserialport])
-AC_CONFIG_HEADERS([config.h libserialport.h])
+AC_CONFIG_HEADERS([config.h])
AC_CONFIG_MACRO_DIR([autostuff])
AC_CONFIG_AUX_DIR([autostuff])
--- /dev/null
+/*
+ * This file is part of the libserialport project.
+ *
+ * Copyright (C) 2013, 2015 Martin Ling <martin-libserialport@earth.li>
+ * Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
+ * Copyright (C) 2014 Aurelien Jacobs <aurel@gnuage.org>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as
+ * published by the Free Software Foundation, either version 3 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/**
+ * @mainpage libserialport API
+ *
+ * Introduction
+ * ============
+ *
+ * libserialport is a minimal library written in C that is intended to take
+ * care of the OS-specific details when writing software that uses serial ports.
+ *
+ * By writing your serial code to use libserialport, you enable it to work
+ * transparently on any platform supported by the library.
+ *
+ * libserialport is an open source project released under the LGPL3+ license.
+ *
+ * The library is maintained by the [sigrok](http://sigrok.org/) project. See
+ * the [libserialport homepage](http://sigrok.org/wiki/Libserialport) for the
+ * latest information.
+ *
+ * Source code is maintained in git at
+ * [git://sigrok.org/libserialport](http://sigrok.org/gitweb/?p=libserialport.git).
+ *
+ * Bugs are tracked at http://sigrok.org/bugzilla/.
+ *
+ * The library was conceived and designed by Martin Ling, is maintained by
+ * Uwe Hermann, and has received contributions from several other developers.
+ * See the git history for full credits.
+ *
+ * API information
+ * ===============
+ *
+ * The API has been designed from scratch. It does not exactly resemble the
+ * serial API of any particular operating system. Instead it aims to provide
+ * a set of functions that can reliably be implemented across all operating
+ * systems. These form a sufficient basis for higher level behaviour to
+ * be implemented in a platform independent manner.
+ *
+ * If you are porting code written for a particular OS, you may find you need
+ * to restructure things somewhat, or do without some specialised features.
+ * For particular notes on porting existing code, see @ref Porting.
+ *
+ * Examples
+ * --------
+ *
+ * Some simple example programs using libserialport are included in the
+ * @c examples directory in the source package:
+ *
+ * - @ref list_ports.c - Getting a list of ports present on the system.
+ * - @ref port_info.c - Getting information on a particular serial port.
+ *
+ * These examples are linked with the API documentation. Each function
+ * in the API reference includes links to where it is used in an example
+ * program, and each appearance of a function in the examples links
+ * to that function's entry in the API reference.
+ *
+ * Headers
+ * -------
+ *
+ * To use libserialport functions in your code, you should include the
+ * libserialport.h header, i.e.
+ * @code
+ * #include <libserialport.h>
+ * @endcode
+ *
+ * Namespace
+ * ---------
+ *
+ * All identifiers defined by the public libserialport headers use the prefix
+ * @c sp_ (for functions and data types) or @c SP_ (for macros and constants).
+ *
+ * Functions
+ * ---------
+ *
+ * The functions provided by the library are documented in detail in
+ * the following sections:
+ *
+ * - @ref Enumeration (obtaining a list of serial ports on the system)
+ * - @ref Ports (opening, closing and getting information about ports)
+ * - @ref Configuration (baud rate, parity, etc.)
+ * - @ref Signals (modem control lines, breaks, etc.)
+ * - @ref Data (reading and writing data, and buffer management)
+ * - @ref Waiting (waiting for ports to be ready, integrating with event loops)
+ * - @ref Errors (getting error and debugging information)
+ *
+ * Data structures
+ * ---------------
+ *
+ * The library defines three data structures:
+ *
+ * - @ref sp_port, which represents a serial port.
+ * See @ref Enumeration.
+ * - @ref sp_port_config, which represents a port configuration.
+ * See @ref Configuration.
+ * - @ref sp_event_set, which represents a set of events.
+ * See @ref Waiting.
+ *
+ * All these structures are allocated and freed by library functions. It is
+ * the caller's responsibility to ensure that the correct calls are made to
+ * free allocated structures after use.
+ *
+ * Return codes and error handling
+ * -------------------------------
+ *
+ * Most functions have return type @ref sp_return and can return only four
+ * possible error values:
+ *
+ * - @ref SP_ERR_ARG means that a function was called with invalid
+ * arguments. This implies a bug in the caller. The arguments passed would
+ * be invalid regardless of the underlying OS or serial device involved.
+ *
+ * - @ref SP_ERR_FAIL means that the OS reported a failure. The error code or
+ * message provided by the OS can be obtained by calling sp_last_error_code()
+ * or sp_last_error_message().
+ *
+ * - @ref SP_ERR_SUPP indicates that there is no support for the requested
+ * operation in the current OS, driver or device. No error message is
+ * available from the OS in this case. There is either no way to request
+ * the operation in the first place, or libserialport does not know how to
+ * do so in the current version.
+ *
+ * - @ref SP_ERR_MEM indicates that a memory allocation failed.
+ *
+ * All of these error values are negative.
+ *
+ * Calls that succeed return @ref SP_OK, which is equal to zero. Some functions
+ * declared @ref sp_return can also return a positive value for a successful
+ * numeric result, e.g. sp_blocking_read() or sp_blocking_write().
+ *
+ * An error message is only available via sp_last_error_message() in the case
+ * where @ref SP_ERR_FAIL was returned by the previous function call. The error
+ * message returned is that provided by the OS, using the current language
+ * settings. It is an error to call sp_last_error_code() or
+ * sp_last_error_message() except after a previous function call returned
+ * @ref SP_ERR_FAIL. The library does not define its own error codes or
+ * messages to accompany other return codes.
+ *
+ * Thread safety
+ * -------------
+ *
+ * Certain combinations of calls can be made concurrently, as follows.
+ *
+ * - Calls using different ports may always be made concurrently, i.e.
+ * it is safe for separate threads to handle their own ports.
+ *
+ * - Calls using the same port may be made concurrently when one call
+ * is a read operation and one call is a write operation, i.e. it is safe
+ * to use separate "reader" and "writer" threads for the same port. See
+ * below for which operations meet these definitions.
+ *
+ * Read operations:
+ *
+ * - sp_blocking_read()
+ * - sp_blocking_read_next()
+ * - sp_nonblocking_read()
+ * - sp_input_waiting()
+ * - sp_flush() with @ref SP_BUF_INPUT only.
+ * - sp_wait() with @ref SP_EVENT_RX_READY only.
+ *
+ * Write operations:
+ *
+ * - sp_blocking_write()
+ * - sp_nonblocking_write()
+ * - sp_output_waiting()
+ * - sp_drain()
+ * - sp_flush() with @ref SP_BUF_OUTPUT only.
+ * - sp_wait() with @ref SP_EVENT_TX_READY only.
+ *
+ * If two calls, on the same port, do not fit into one of these categories
+ * each, then they may not be made concurrently.
+ *
+ * Debugging
+ * ---------
+ *
+ * The library can output extensive tracing and debugging information. The
+ * simplest way to use this is to set the environment variable
+ * @c LIBSERIALPORT_DEBUG to any value; messages will then be output to the
+ * standard error stream.
+ *
+ * This behaviour is implemented by a default debug message handling
+ * callback. An alternative callback can be set using sp_set_debug_handler(),
+ * in order to e.g. redirect the output elsewhere or filter it.
+ *
+ * No guarantees are made about the content of the debug output; it is chosen
+ * to suit the needs of the developers and may change between releases.
+ *
+ * @anchor Porting
+ * Porting
+ * -------
+ *
+ * The following guidelines may help when porting existing OS-specific code
+ * to use libserialport.
+ *
+ * ### Porting from Unix-like systems ###
+ *
+ * There are two main differences to note when porting code written for Unix.
+ *
+ * The first is that Unix traditionally provides a wide range of functionality
+ * for dealing with serial devices at the OS level; this is exposed through the
+ * termios API and dates to the days when serial terminals were common. If your
+ * code relies on many of these facilities you will need to adapt it, because
+ * libserialport provides only a raw binary channel with no special handling.
+ *
+ * The second relates to blocking versus non-blocking I/O behaviour. In
+ * Unix-like systems this is normally specified by setting the @c O_NONBLOCK
+ * flag on the file descriptor, affecting the semantics of subsequent @c read()
+ * and @c write() calls.
+ *
+ * In libserialport, blocking and nonblocking operations are both available at
+ * any time. If your existing code Ń•ets @c O_NONBLOCK, you should use
+ * sp_nonblocking_read() and sp_nonblocking_write() to get the same behaviour
+ * as your existing @c read() and @c write() calls. If it does not, you should
+ * use sp_blocking_read() and sp_blocking_write() instead. You may also find
+ * sp_blocking_read_next() useful, which reproduces the semantics of a blocking
+ * read() with @c VTIME=0 and @c VMIN=1 set in termios.
+ *
+ * Finally, you should take care if your program uses custom signal handlers.
+ * The blocking calls provided by libserialport will restart system calls that
+ * return with @c EINTR, so you will need to make your own arrangements if you
+ * need to interrupt blocking operations when your signal handlers are called.
+ * This is not an issue if you only use the default handlers.
+ *
+ * ### Porting from Windows ###
+ *
+ * The main consideration when porting from Windows is that there is no
+ * direct equivalent for overlapped I/O operations.
+ *
+ * If your program does not use overlapped I/O, you can simply use
+ * sp_blocking_read() and sp_blocking_write() as direct equivalents for
+ * @c ReadFile() and @c WriteFile(). You may also find sp_blocking_read_next()
+ * useful, which reproduces the special semantics of @c ReadFile() with
+ * @c ReadIntervalTimeout and @c ReadTotalTimeoutMultiplier set to @c MAXDWORD
+ * and @c ReadTotalTimeoutConstant set to between @c 1 and @c MAXDWORD-1 .
+ *
+ * If your program makes use of overlapped I/O to continue work while a serial
+ * operation is in progress, then you can achieve the same results using
+ * sp_nonblocking_read() and sp_nonblocking_write().
+ *
+ * Generally, overlapped I/O is combined with either waiting for completion
+ * once there is no more background work to do (using @c WaitForSingleObject()
+ * or @c WaitForMultipleObjects()), or periodically checking for completion
+ * with @c GetOverlappedResult(). If the aim is to start a new operation for
+ * further data once the previous one has completed, you can instead simply
+ * call the nonblocking functions again with the next data. If you need to
+ * wait for completion, use sp_wait() to determine when the port is ready to
+ * send or receive further data.
+ */
+
+#ifndef LIBSERIALPORT_LIBSERIALPORT_H
+#define LIBSERIALPORT_LIBSERIALPORT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stddef.h>
+
+/** Return values. */
+enum sp_return {
+ /** Operation completed successfully. */
+ SP_OK = 0,
+ /** Invalid arguments were passed to the function. */
+ SP_ERR_ARG = -1,
+ /** A system error occurred while executing the operation. */
+ SP_ERR_FAIL = -2,
+ /** A memory allocation failed while executing the operation. */
+ SP_ERR_MEM = -3,
+ /** The requested operation is not supported by this system or device. */
+ SP_ERR_SUPP = -4
+};
+
+/** Port access modes. */
+enum sp_mode {
+ /** Open port for read access. */
+ SP_MODE_READ = 1,
+ /** Open port for write access. */
+ SP_MODE_WRITE = 2,
+ /** Open port for read and write access. @since 0.1.1 */
+ SP_MODE_READ_WRITE = 3
+};
+
+/** Port events. */
+enum sp_event {
+ /** Data received and ready to read. */
+ SP_EVENT_RX_READY = 1,
+ /** Ready to transmit new data. */
+ SP_EVENT_TX_READY = 2,
+ /** Error occurred. */
+ SP_EVENT_ERROR = 4
+};
+
+/** Buffer selection. */
+enum sp_buffer {
+ /** Input buffer. */
+ SP_BUF_INPUT = 1,
+ /** Output buffer. */
+ SP_BUF_OUTPUT = 2,
+ /** Both buffers. */
+ SP_BUF_BOTH = 3
+};
+
+/** Parity settings. */
+enum sp_parity {
+ /** Special value to indicate setting should be left alone. */
+ SP_PARITY_INVALID = -1,
+ /** No parity. */
+ SP_PARITY_NONE = 0,
+ /** Odd parity. */
+ SP_PARITY_ODD = 1,
+ /** Even parity. */
+ SP_PARITY_EVEN = 2,
+ /** Mark parity. */
+ SP_PARITY_MARK = 3,
+ /** Space parity. */
+ SP_PARITY_SPACE = 4
+};
+
+/** RTS pin behaviour. */
+enum sp_rts {
+ /** Special value to indicate setting should be left alone. */
+ SP_RTS_INVALID = -1,
+ /** RTS off. */
+ SP_RTS_OFF = 0,
+ /** RTS on. */
+ SP_RTS_ON = 1,
+ /** RTS used for flow control. */
+ SP_RTS_FLOW_CONTROL = 2
+};
+
+/** CTS pin behaviour. */
+enum sp_cts {
+ /** Special value to indicate setting should be left alone. */
+ SP_CTS_INVALID = -1,
+ /** CTS ignored. */
+ SP_CTS_IGNORE = 0,
+ /** CTS used for flow control. */
+ SP_CTS_FLOW_CONTROL = 1
+};
+
+/** DTR pin behaviour. */
+enum sp_dtr {
+ /** Special value to indicate setting should be left alone. */
+ SP_DTR_INVALID = -1,
+ /** DTR off. */
+ SP_DTR_OFF = 0,
+ /** DTR on. */
+ SP_DTR_ON = 1,
+ /** DTR used for flow control. */
+ SP_DTR_FLOW_CONTROL = 2
+};
+
+/** DSR pin behaviour. */
+enum sp_dsr {
+ /** Special value to indicate setting should be left alone. */
+ SP_DSR_INVALID = -1,
+ /** DSR ignored. */
+ SP_DSR_IGNORE = 0,
+ /** DSR used for flow control. */
+ SP_DSR_FLOW_CONTROL = 1
+};
+
+/** XON/XOFF flow control behaviour. */
+enum sp_xonxoff {
+ /** Special value to indicate setting should be left alone. */
+ SP_XONXOFF_INVALID = -1,
+ /** XON/XOFF disabled. */
+ SP_XONXOFF_DISABLED = 0,
+ /** XON/XOFF enabled for input only. */
+ SP_XONXOFF_IN = 1,
+ /** XON/XOFF enabled for output only. */
+ SP_XONXOFF_OUT = 2,
+ /** XON/XOFF enabled for input and output. */
+ SP_XONXOFF_INOUT = 3
+};
+
+/** Standard flow control combinations. */
+enum sp_flowcontrol {
+ /** No flow control. */
+ SP_FLOWCONTROL_NONE = 0,
+ /** Software flow control using XON/XOFF characters. */
+ SP_FLOWCONTROL_XONXOFF = 1,
+ /** Hardware flow control using RTS/CTS signals. */
+ SP_FLOWCONTROL_RTSCTS = 2,
+ /** Hardware flow control using DTR/DSR signals. */
+ SP_FLOWCONTROL_DTRDSR = 3
+};
+
+/** Input signals. */
+enum sp_signal {
+ /** Clear to send. */
+ SP_SIG_CTS = 1,
+ /** Data set ready. */
+ SP_SIG_DSR = 2,
+ /** Data carrier detect. */
+ SP_SIG_DCD = 4,
+ /** Ring indicator. */
+ SP_SIG_RI = 8
+};
+
+/**
+ * Transport types.
+ *
+ * @since 0.1.1
+ */
+enum sp_transport {
+ /** Native platform serial port. @since 0.1.1 */
+ SP_TRANSPORT_NATIVE,
+ /** USB serial port adapter. @since 0.1.1 */
+ SP_TRANSPORT_USB,
+ /** Bluetooth serial port adapter. @since 0.1.1 */
+ SP_TRANSPORT_BLUETOOTH
+};
+
+/**
+ * @struct sp_port
+ * An opaque structure representing a serial port.
+ */
+struct sp_port;
+
+/**
+ * @struct sp_port_config
+ * An opaque structure representing the configuration for a serial port.
+ */
+struct sp_port_config;
+
+/**
+ * @struct sp_event_set
+ * A set of handles to wait on for events.
+ */
+struct sp_event_set {
+ /** Array of OS-specific handles. */
+ void *handles;
+ /** Array of bitmasks indicating which events apply for each handle. */
+ enum sp_event *masks;
+ /** Number of handles. */
+ unsigned int count;
+};
+
+/**
+ * @defgroup Enumeration Port enumeration
+ *
+ * Enumerating the serial ports of a system.
+ *
+ * See @ref list_ports.c for a working example of port enumeration.
+ *
+ * @{
+ */
+
+/**
+ * Obtain a pointer to a new sp_port structure representing the named port.
+ *
+ * The user should allocate a variable of type "struct sp_port *" and pass a
+ * pointer to this to receive the result.
+ *
+ * The result should be freed after use by calling sp_free_port().
+ *
+ * @param[in] portname The OS-specific name of a serial port. Must not be NULL.
+ * @param[out] port_ptr If any error is returned, the variable pointed to by
+ * port_ptr will be set to NULL. Otherwise, it will be set
+ * to point to the newly allocated port. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr);
+
+/**
+ * Free a port structure obtained from sp_get_port_by_name() or sp_copy_port().
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @since 0.1.0
+ */
+void sp_free_port(struct sp_port *port);
+
+/**
+ * List the serial ports available on the system.
+ *
+ * The result obtained is an array of pointers to sp_port structures,
+ * terminated by a NULL. The user should allocate a variable of type
+ * "struct sp_port **" and pass a pointer to this to receive the result.
+ *
+ * The result should be freed after use by calling sp_free_port_list().
+ * If a port from the list is to be used after freeing the list, it must be
+ * copied first using sp_copy_port().
+ *
+ * @param[out] list_ptr If any error is returned, the variable pointed to by
+ * list_ptr will be set to NULL. Otherwise, it will be set
+ * to point to the newly allocated array. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_list_ports(struct sp_port ***list_ptr);
+
+/**
+ * Make a new copy of an sp_port structure.
+ *
+ * The user should allocate a variable of type "struct sp_port *" and pass a
+ * pointer to this to receive the result.
+ *
+ * The copy should be freed after use by calling sp_free_port().
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] copy_ptr If any error is returned, the variable pointed to by
+ * copy_ptr will be set to NULL. Otherwise, it will be set
+ * to point to the newly allocated copy. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr);
+
+/**
+ * Free a port list obtained from sp_list_ports().
+ *
+ * This will also free all the sp_port structures referred to from the list;
+ * any that are to be retained must be copied first using sp_copy_port().
+ *
+ * @param[in] ports Pointer to a list of port structures. Must not be NULL.
+ *
+ * @since 0.1.0
+ */
+void sp_free_port_list(struct sp_port **ports);
+
+/**
+ * @}
+ * @defgroup Ports Port handling
+ *
+ * Opening, closing and querying ports.
+ *
+ * See @ref port_info.c for a working example of getting port information.
+ *
+ * @{
+ */
+
+/**
+ * Open the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] flags Flags to use when opening the serial port.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_open(struct sp_port *port, enum sp_mode flags);
+
+/**
+ * Close the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_close(struct sp_port *port);
+
+/**
+ * Get the name of a port.
+ *
+ * The name returned is whatever is normally used to refer to a port on the
+ * current operating system; e.g. for Windows it will usually be a "COMn"
+ * device name, and for Unix it will be a device path beginning with "/dev/".
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port name, or NULL if an invalid port is passed. The name
+ * string is part of the port structure and may not be used after
+ * the port structure has been freed.
+ *
+ * @since 0.1.0
+ */
+char *sp_get_port_name(const struct sp_port *port);
+
+/**
+ * Get a description for a port, to present to end user.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port description, or NULL if an invalid port is passed.
+ * The description string is part of the port structure and may not
+ * be used after the port structure has been freed.
+ *
+ * @since 0.1.1
+ */
+char *sp_get_port_description(const struct sp_port *port);
+
+/**
+ * Get the transport type used by a port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port transport type.
+ *
+ * @since 0.1.1
+ */
+enum sp_transport sp_get_port_transport(const struct sp_port *port);
+
+/**
+ * Get the USB bus number and address on bus of a USB serial adapter port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] usb_bus Pointer to a variable to store the USB bus.
+ * Can be NULL (in that case it will be ignored).
+ * @param[out] usb_address Pointer to a variable to store the USB address.
+ * Can be NULL (in that case it will be ignored).
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.1
+ */
+enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port,
+ int *usb_bus, int *usb_address);
+
+/**
+ * Get the USB Vendor ID and Product ID of a USB serial adapter port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] usb_vid Pointer to a variable to store the USB VID.
+ * Can be NULL (in that case it will be ignored).
+ * @param[out] usb_pid Pointer to a variable to store the USB PID.
+ * Can be NULL (in that case it will be ignored).
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.1
+ */
+enum sp_return sp_get_port_usb_vid_pid(const struct sp_port *port, int *usb_vid, int *usb_pid);
+
+/**
+ * Get the USB manufacturer string of a USB serial adapter port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port manufacturer string, or NULL if an invalid port is passed.
+ * The manufacturer string is part of the port structure and may not
+ * be used after the port structure has been freed.
+ *
+ * @since 0.1.1
+ */
+char *sp_get_port_usb_manufacturer(const struct sp_port *port);
+
+/**
+ * Get the USB product string of a USB serial adapter port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port product string, or NULL if an invalid port is passed.
+ * The product string is part of the port structure and may not be
+ * used after the port structure has been freed.
+ *
+ * @since 0.1.1
+ */
+char *sp_get_port_usb_product(const struct sp_port *port);
+
+/**
+ * Get the USB serial number string of a USB serial adapter port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port serial number, or NULL if an invalid port is passed.
+ * The serial number string is part of the port structure and may
+ * not be used after the port structure has been freed.
+ *
+ * @since 0.1.1
+ */
+char *sp_get_port_usb_serial(const struct sp_port *port);
+
+/**
+ * Get the MAC address of a Bluetooth serial adapter port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return The port MAC address, or NULL if an invalid port is passed.
+ * The MAC address string is part of the port structure and may not
+ * be used after the port structure has been freed.
+ *
+ * @since 0.1.1
+ */
+char *sp_get_port_bluetooth_address(const struct sp_port *port);
+
+/**
+ * Get the operating system handle for a port.
+ *
+ * The type of the handle depends on the operating system. On Unix based
+ * systems, the handle is a file descriptor of type "int". On Windows, the
+ * handle is of type "HANDLE". The user should allocate a variable of the
+ * appropriate type and pass a pointer to this to receive the result.
+ *
+ * To obtain a valid handle, the port must first be opened by calling
+ * sp_open() using the same port structure.
+ *
+ * After the port is closed or the port structure freed, the handle may
+ * no longer be valid.
+ *
+ * @warning This feature is provided so that programs may make use of
+ * OS-specific functionality where desired. Doing so obviously
+ * comes at a cost in portability. It also cannot be guaranteed
+ * that direct usage of the OS handle will not conflict with the
+ * library's own usage of the port. Be careful.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] result_ptr If any error is returned, the variable pointed to by
+ * result_ptr will have unknown contents and should not
+ * be used. Otherwise, it will be set to point to the
+ * OS handle. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr);
+
+/**
+ * @}
+ *
+ * @defgroup Configuration Configuration
+ *
+ * Setting and querying serial port parameters.
+ * @{
+ */
+
+/**
+ * Allocate a port configuration structure.
+ *
+ * The user should allocate a variable of type "struct sp_port_config *" and
+ * pass a pointer to this to receive the result. The variable will be updated
+ * to point to the new configuration structure. The structure is opaque and
+ * must be accessed via the functions provided.
+ *
+ * All parameters in the structure will be initialised to special values which
+ * are ignored by sp_set_config().
+ *
+ * The structure should be freed after use by calling sp_free_config().
+ *
+ * @param[out] config_ptr If any error is returned, the variable pointed to by
+ * config_ptr will be set to NULL. Otherwise, it will
+ * be set to point to the allocated config structure.
+ * Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_new_config(struct sp_port_config **config_ptr);
+
+/**
+ * Free a port configuration structure.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ *
+ * @since 0.1.0
+ */
+void sp_free_config(struct sp_port_config *config);
+
+/**
+ * Get the current configuration of the specified serial port.
+ *
+ * The user should allocate a configuration structure using sp_new_config()
+ * and pass this as the config parameter. The configuration structure will
+ * be updated with the port configuration.
+ *
+ * Any parameters that are configured with settings not recognised or
+ * supported by libserialport, will be set to special values that are
+ * ignored by sp_set_config().
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] config Pointer to a configuration structure that will hold
+ * the result. Upon errors the contents of the config
+ * struct will not be changed. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config);
+
+/**
+ * Set the configuration for the specified serial port.
+ *
+ * For each parameter in the configuration, there is a special value (usually
+ * -1, but see the documentation for each field). These values will be ignored
+ * and the corresponding setting left unchanged on the port.
+ *
+ * Upon errors, the configuration of the serial port is unknown since
+ * partial/incomplete config updates may have happened.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config);
+
+/**
+ * Set the baud rate for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] baudrate Baud rate in bits per second.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate);
+
+/**
+ * Get the baud rate from a port configuration.
+ *
+ * The user should allocate a variable of type int and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] baudrate_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr);
+
+/**
+ * Set the baud rate in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] baudrate Baud rate in bits per second, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate);
+
+/**
+ * Set the data bits for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] bits Number of data bits.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_bits(struct sp_port *port, int bits);
+
+/**
+ * Get the data bits from a port configuration.
+ *
+ * The user should allocate a variable of type int and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] bits_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr);
+
+/**
+ * Set the data bits in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] bits Number of data bits, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits);
+
+/**
+ * Set the parity setting for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] parity Parity setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity);
+
+/**
+ * Get the parity setting from a port configuration.
+ *
+ * The user should allocate a variable of type enum sp_parity and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] parity_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr);
+
+/**
+ * Set the parity setting in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] parity Parity setting, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity);
+
+/**
+ * Set the stop bits for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] stopbits Number of stop bits.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits);
+
+/**
+ * Get the stop bits from a port configuration.
+ *
+ * The user should allocate a variable of type int and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] stopbits_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr);
+
+/**
+ * Set the stop bits in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] stopbits Number of stop bits, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits);
+
+/**
+ * Set the RTS pin behaviour for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] rts RTS pin mode.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts);
+
+/**
+ * Get the RTS pin behaviour from a port configuration.
+ *
+ * The user should allocate a variable of type enum sp_rts and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] rts_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr);
+
+/**
+ * Set the RTS pin behaviour in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] rts RTS pin mode, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts);
+
+/**
+ * Set the CTS pin behaviour for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] cts CTS pin mode.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts);
+
+/**
+ * Get the CTS pin behaviour from a port configuration.
+ *
+ * The user should allocate a variable of type enum sp_cts and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] cts_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr);
+
+/**
+ * Set the CTS pin behaviour in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] cts CTS pin mode, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts);
+
+/**
+ * Set the DTR pin behaviour for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] dtr DTR pin mode.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr);
+
+/**
+ * Get the DTR pin behaviour from a port configuration.
+ *
+ * The user should allocate a variable of type enum sp_dtr and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] dtr_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr);
+
+/**
+ * Set the DTR pin behaviour in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] dtr DTR pin mode, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr);
+
+/**
+ * Set the DSR pin behaviour for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] dsr DSR pin mode.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr);
+
+/**
+ * Get the DSR pin behaviour from a port configuration.
+ *
+ * The user should allocate a variable of type enum sp_dsr and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] dsr_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr);
+
+/**
+ * Set the DSR pin behaviour in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] dsr DSR pin mode, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr);
+
+/**
+ * Set the XON/XOFF configuration for the specified serial port.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] xon_xoff XON/XOFF mode.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff);
+
+/**
+ * Get the XON/XOFF configuration from a port configuration.
+ *
+ * The user should allocate a variable of type enum sp_xonxoff and
+ * pass a pointer to this to receive the result.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[out] xon_xoff_ptr Pointer to a variable to store the result. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr);
+
+/**
+ * Set the XON/XOFF configuration in a port configuration.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] xon_xoff XON/XOFF mode, or -1 to retain the current setting.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff);
+
+/**
+ * Set the flow control type in a port configuration.
+ *
+ * This function is a wrapper that sets the RTS, CTS, DTR, DSR and
+ * XON/XOFF settings as necessary for the specified flow control
+ * type. For more fine-grained control of these settings, use their
+ * individual configuration functions.
+ *
+ * @param[in] config Pointer to a configuration structure. Must not be NULL.
+ * @param[in] flowcontrol Flow control setting to use.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol);
+
+/**
+ * Set the flow control type for the specified serial port.
+ *
+ * This function is a wrapper that sets the RTS, CTS, DTR, DSR and
+ * XON/XOFF settings as necessary for the specified flow control
+ * type. For more fine-grained control of these settings, use their
+ * individual configuration functions.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] flowcontrol Flow control setting to use.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol);
+
+/**
+ * @}
+ *
+ * @defgroup Data Data handling
+ *
+ * Reading, writing, and flushing data.
+ *
+ * @{
+ */
+
+/**
+ * Read bytes from the specified serial port, blocking until complete.
+ *
+ * @warning If your program runs on Unix, defines its own signal handlers, and
+ * needs to abort blocking reads when these are called, then you
+ * should not use this function. It repeats system calls that return
+ * with EINTR. To be able to abort a read from a signal handler, you
+ * should implement your own blocking read using sp_nonblocking_read()
+ * together with a blocking method that makes sense for your program.
+ * E.g. you can obtain the file descriptor for an open port using
+ * sp_get_port_handle() and use this to call select() or pselect(),
+ * with appropriate arrangements to return if a signal is received.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
+ * @param[in] count Requested number of bytes to read.
+ * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
+ *
+ * @return The number of bytes read on success, or a negative error code. If
+ * the number of bytes returned is less than that requested, the
+ * timeout was reached before the requested number of bytes was
+ * available. If timeout is zero, the function will always return
+ * either the requested number of bytes or a negative error code.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms);
+
+/**
+ * Read bytes from the specified serial port, returning as soon as any data is
+ * available.
+ *
+ * @warning If your program runs on Unix, defines its own signal handlers, and
+ * needs to abort blocking reads when these are called, then you
+ * should not use this function. It repeats system calls that return
+ * with EINTR. To be able to abort a read from a signal handler, you
+ * should implement your own blocking read using sp_nonblocking_read()
+ * together with a blocking method that makes sense for your program.
+ * E.g. you can obtain the file descriptor for an open port using
+ * sp_get_port_handle() and use this to call select() or pselect(),
+ * with appropriate arrangements to return if a signal is received.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
+ * @param[in] count Maximum number of bytes to read. Must not be zero.
+ * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
+ *
+ * @return The number of bytes read on success, or a negative error code. If
+ * the result is zero, the timeout was reached before any bytes were
+ * available. If timeout_ms is zero, the function will always return
+ * either at least one byte, or a negative error code.
+ *
+ * @since 0.1.1
+ */
+enum sp_return sp_blocking_read_next(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms);
+
+/**
+ * Read bytes from the specified serial port, without blocking.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
+ * @param[in] count Maximum number of bytes to read.
+ *
+ * @return The number of bytes read on success, or a negative error code. The
+ * number of bytes returned may be any number from zero to the maximum
+ * that was requested.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count);
+
+/**
+ * Write bytes to the specified serial port, blocking until complete.
+ *
+ * Note that this function only ensures that the accepted bytes have been
+ * written to the OS; they may be held in driver or hardware buffers and not
+ * yet physically transmitted. To check whether all written bytes have actually
+ * been transmitted, use the sp_output_waiting() function. To wait until all
+ * written bytes have actually been transmitted, use the sp_drain() function.
+ *
+ * @warning If your program runs on Unix, defines its own signal handlers, and
+ * needs to abort blocking writes when these are called, then you
+ * should not use this function. It repeats system calls that return
+ * with EINTR. To be able to abort a write from a signal handler, you
+ * should implement your own blocking write using sp_nonblocking_write()
+ * together with a blocking method that makes sense for your program.
+ * E.g. you can obtain the file descriptor for an open port using
+ * sp_get_port_handle() and use this to call select() or pselect(),
+ * with appropriate arrangements to return if a signal is received.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] buf Buffer containing the bytes to write. Must not be NULL.
+ * @param[in] count Requested number of bytes to write.
+ * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
+ *
+ * @return The number of bytes written on success, or a negative error code.
+ * If the number of bytes returned is less than that requested, the
+ * timeout was reached before the requested number of bytes was
+ * written. If timeout is zero, the function will always return
+ * either the requested number of bytes or a negative error code. In
+ * the event of an error there is no way to determine how many bytes
+ * were sent before the error occurred.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout_ms);
+
+/**
+ * Write bytes to the specified serial port, without blocking.
+ *
+ * Note that this function only ensures that the accepted bytes have been
+ * written to the OS; they may be held in driver or hardware buffers and not
+ * yet physically transmitted. To check whether all written bytes have actually
+ * been transmitted, use the sp_output_waiting() function. To wait until all
+ * written bytes have actually been transmitted, use the sp_drain() function.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] buf Buffer containing the bytes to write. Must not be NULL.
+ * @param[in] count Maximum number of bytes to write.
+ *
+ * @return The number of bytes written on success, or a negative error code.
+ * The number of bytes returned may be any number from zero to the
+ * maximum that was requested.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count);
+
+/**
+ * Gets the number of bytes waiting in the input buffer.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return Number of bytes waiting on success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_input_waiting(struct sp_port *port);
+
+/**
+ * Gets the number of bytes waiting in the output buffer.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return Number of bytes waiting on success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_output_waiting(struct sp_port *port);
+
+/**
+ * Flush serial port buffers. Data in the selected buffer(s) is discarded.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] buffers Which buffer(s) to flush.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers);
+
+/**
+ * Wait for buffered data to be transmitted.
+ *
+ * @warning If your program runs on Unix, defines its own signal handlers, and
+ * needs to abort draining the output buffer when when these are
+ * called, then you should not use this function. It repeats system
+ * calls that return with EINTR. To be able to abort a drain from a
+ * signal handler, you would need to implement your own blocking
+ * drain by polling the result of sp_output_waiting().
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_drain(struct sp_port *port);
+
+/**
+ * @}
+ *
+ * @defgroup Waiting Waiting
+ *
+ * Waiting for events and timeout handling.
+ *
+ * @{
+ */
+
+/**
+ * Allocate storage for a set of events.
+ *
+ * The user should allocate a variable of type struct sp_event_set *,
+ * then pass a pointer to this variable to receive the result.
+ *
+ * The result should be freed after use by calling sp_free_event_set().
+ *
+ * @param[out] result_ptr If any error is returned, the variable pointed to by
+ * result_ptr will be set to NULL. Otherwise, it will
+ * be set to point to the event set. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_new_event_set(struct sp_event_set **result_ptr);
+
+/**
+ * Add events to a struct sp_event_set for a given port.
+ *
+ * The port must first be opened by calling sp_open() using the same port
+ * structure.
+ *
+ * After the port is closed or the port structure freed, the results may
+ * no longer be valid.
+ *
+ * @param[in,out] event_set Event set to update. Must not be NULL.
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[in] mask Bitmask of events to be waited for.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_add_port_events(struct sp_event_set *event_set,
+ const struct sp_port *port, enum sp_event mask);
+
+/**
+ * Wait for any of a set of events to occur.
+ *
+ * @param[in] event_set Event set to wait on. Must not be NULL.
+ * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout_ms);
+
+/**
+ * Free a structure allocated by sp_new_event_set().
+ *
+ * @param[in] event_set Event set to free. Must not be NULL.
+ *
+ * @since 0.1.0
+ */
+void sp_free_event_set(struct sp_event_set *event_set);
+
+/**
+ * @}
+ *
+ * @defgroup Signals Signals
+ *
+ * Port signalling operations.
+ *
+ * @{
+ */
+
+/**
+ * Gets the status of the control signals for the specified port.
+ *
+ * The user should allocate a variable of type "enum sp_signal" and pass a
+ * pointer to this variable to receive the result. The result is a bitmask
+ * in which individual signals can be checked by bitwise OR with values of
+ * the sp_signal enum.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ * @param[out] signal_mask Pointer to a variable to receive the result.
+ * Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signal_mask);
+
+/**
+ * Put the port transmit line into the break state.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_start_break(struct sp_port *port);
+
+/**
+ * Take the port transmit line out of the break state.
+ *
+ * @param[in] port Pointer to a port structure. Must not be NULL.
+ *
+ * @return SP_OK upon success, a negative error code otherwise.
+ *
+ * @since 0.1.0
+ */
+enum sp_return sp_end_break(struct sp_port *port);
+
+/**
+ * @}
+ *
+ * @defgroup Errors Errors
+ *
+ * Obtaining error information.
+ *
+ * @{
+ */
+
+/**
+ * Get the error code for a failed operation.
+ *
+ * In order to obtain the correct result, this function should be called
+ * straight after the failure, before executing any other system operations.
+ * The result is thread-specific, and only valid when called immediately
+ * after a previous call returning SP_ERR_FAIL.
+ *
+ * @return The system's numeric code for the error that caused the last
+ * operation to fail.
+ *
+ * @since 0.1.0
+ */
+int sp_last_error_code(void);
+
+/**
+ * Get the error message for a failed operation.
+ *
+ * In order to obtain the correct result, this function should be called
+ * straight after the failure, before executing other system operations.
+ * The result is thread-specific, and only valid when called immediately
+ * after a previous call returning SP_ERR_FAIL.
+ *
+ * @return The system's message for the error that caused the last
+ * operation to fail. This string may be allocated by the function,
+ * and should be freed after use by calling sp_free_error_message().
+ *
+ * @since 0.1.0
+ */
+char *sp_last_error_message(void);
+
+/**
+ * Free an error message returned by sp_last_error_message().
+ *
+ * @param[in] message The error message string to free. Must not be NULL.
+ *
+ * @since 0.1.0
+ */
+void sp_free_error_message(char *message);
+
+/**
+ * Set the handler function for library debugging messages.
+ *
+ * Debugging messages are generated by the library during each operation,
+ * to help in diagnosing problems. The handler will be called for each
+ * message. The handler can be set to NULL to ignore all debug messages.
+ *
+ * The handler function should accept a format string and variable length
+ * argument list, in the same manner as e.g. printf().
+ *
+ * The default handler is sp_default_debug_handler().
+ *
+ * @param[in] handler The handler function to use. Can be NULL (in that case
+ * all debug messages will be ignored).
+ *
+ * @since 0.1.0
+ */
+void sp_set_debug_handler(void (*handler)(const char *format, ...));
+
+/**
+ * Default handler function for library debugging messages.
+ *
+ * This function prints debug messages to the standard error stream if the
+ * environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are
+ * ignored.
+ *
+ * @param[in] format The format string to use. Must not be NULL.
+ * @param[in] ... The variable length argument list to use.
+ *
+ * @since 0.1.0
+ */
+void sp_default_debug_handler(const char *format, ...);
+
+/** @} */
+
+/**
+ * @defgroup Versions Versions
+ *
+ * Version number querying functions, definitions, and macros.
+ *
+ * This set of API calls returns two different version numbers related
+ * to libserialport. The "package version" is the release version number of the
+ * libserialport tarball in the usual "major.minor.micro" format, e.g. "0.1.0".
+ *
+ * The "library version" is independent of that; it is the libtool version
+ * number in the "current:revision:age" format, e.g. "2:0:0".
+ * See http://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning for details.
+ *
+ * Both version numbers (and/or individual components of them) can be
+ * retrieved via the API calls at runtime, and/or they can be checked at
+ * compile/preprocessor time using the respective macros.
+ *
+ * @{
+ */
+
+/*
+ * Package version macros (can be used for conditional compilation).
+ */
+
+/** The libserialport package 'major' version number. */
+#define SP_PACKAGE_VERSION_MAJOR 0
+
+/** The libserialport package 'minor' version number. */
+#define SP_PACKAGE_VERSION_MINOR 1
+
+/** The libserialport package 'micro' version number. */
+#define SP_PACKAGE_VERSION_MICRO 1
+
+/** The libserialport package version ("major.minor.micro") as string. */
+#define SP_PACKAGE_VERSION_STRING "0.1.1"
+
+/*
+ * Library/libtool version macros (can be used for conditional compilation).
+ */
+
+/** The libserialport libtool 'current' version number. */
+#define SP_LIB_VERSION_CURRENT 1
+
+/** The libserialport libtool 'revision' version number. */
+#define SP_LIB_VERSION_REVISION 0
+
+/** The libserialport libtool 'age' version number. */
+#define SP_LIB_VERSION_AGE 1
+
+/** The libserialport libtool version ("current:revision:age") as string. */
+#define SP_LIB_VERSION_STRING "1:0:1"
+
+/**
+ * Get the major libserialport package version number.
+ *
+ * @return The major package version number.
+ *
+ * @since 0.1.0
+ */
+int sp_get_major_package_version(void);
+
+/**
+ * Get the minor libserialport package version number.
+ *
+ * @return The minor package version number.
+ *
+ * @since 0.1.0
+ */
+int sp_get_minor_package_version(void);
+
+/**
+ * Get the micro libserialport package version number.
+ *
+ * @return The micro package version number.
+ *
+ * @since 0.1.0
+ */
+int sp_get_micro_package_version(void);
+
+/**
+ * Get the libserialport package version number as a string.
+ *
+ * @return The package version number string. The returned string is
+ * static and thus should NOT be free'd by the caller.
+ *
+ * @since 0.1.0
+ */
+const char *sp_get_package_version_string(void);
+
+/**
+ * Get the "current" part of the libserialport library version number.
+ *
+ * @return The "current" library version number.
+ *
+ * @since 0.1.0
+ */
+int sp_get_current_lib_version(void);
+
+/**
+ * Get the "revision" part of the libserialport library version number.
+ *
+ * @return The "revision" library version number.
+ *
+ * @since 0.1.0
+ */
+int sp_get_revision_lib_version(void);
+
+/**
+ * Get the "age" part of the libserialport library version number.
+ *
+ * @return The "age" library version number.
+ *
+ * @since 0.1.0
+ */
+int sp_get_age_lib_version(void);
+
+/**
+ * Get the libserialport library version number as a string.
+ *
+ * @return The library version number string. The returned string is
+ * static and thus should NOT be free'd by the caller.
+ *
+ * @since 0.1.0
+ */
+const char *sp_get_lib_version_string(void);
+
+/** @} */
+
+/**
+ * @example list_ports.c Getting a list of ports present on the system.
+ * @example port_info.c Getting information on a particular serial port.
+*/
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+++ /dev/null
-/*
- * This file is part of the libserialport project.
- *
- * Copyright (C) 2013, 2015 Martin Ling <martin-libserialport@earth.li>
- * Copyright (C) 2014 Uwe Hermann <uwe@hermann-uwe.de>
- * Copyright (C) 2014 Aurelien Jacobs <aurel@gnuage.org>
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU Lesser General Public License as
- * published by the Free Software Foundation, either version 3 of the
- * License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public License
- * along with this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-/**
- * @mainpage libserialport API
- *
- * Introduction
- * ============
- *
- * libserialport is a minimal library written in C that is intended to take
- * care of the OS-specific details when writing software that uses serial ports.
- *
- * By writing your serial code to use libserialport, you enable it to work
- * transparently on any platform supported by the library.
- *
- * libserialport is an open source project released under the LGPL3+ license.
- *
- * The library is maintained by the [sigrok](http://sigrok.org/) project. See
- * the [libserialport homepage](http://sigrok.org/wiki/Libserialport) for the
- * latest information.
- *
- * Source code is maintained in git at
- * [git://sigrok.org/libserialport](http://sigrok.org/gitweb/?p=libserialport.git).
- *
- * Bugs are tracked at http://sigrok.org/bugzilla/.
- *
- * The library was conceived and designed by Martin Ling, is maintained by
- * Uwe Hermann, and has received contributions from several other developers.
- * See the git history for full credits.
- *
- * API information
- * ===============
- *
- * The API has been designed from scratch. It does not exactly resemble the
- * serial API of any particular operating system. Instead it aims to provide
- * a set of functions that can reliably be implemented across all operating
- * systems. These form a sufficient basis for higher level behaviour to
- * be implemented in a platform independent manner.
- *
- * If you are porting code written for a particular OS, you may find you need
- * to restructure things somewhat, or do without some specialised features.
- * For particular notes on porting existing code, see @ref Porting.
- *
- * Examples
- * --------
- *
- * Some simple example programs using libserialport are included in the
- * @c examples directory in the source package:
- *
- * - @ref list_ports.c - Getting a list of ports present on the system.
- * - @ref port_info.c - Getting information on a particular serial port.
- *
- * These examples are linked with the API documentation. Each function
- * in the API reference includes links to where it is used in an example
- * program, and each appearance of a function in the examples links
- * to that function's entry in the API reference.
- *
- * Headers
- * -------
- *
- * To use libserialport functions in your code, you should include the
- * libserialport.h header, i.e.
- * @code
- * #include <libserialport.h>
- * @endcode
- *
- * Namespace
- * ---------
- *
- * All identifiers defined by the public libserialport headers use the prefix
- * @c sp_ (for functions and data types) or @c SP_ (for macros and constants).
- *
- * Functions
- * ---------
- *
- * The functions provided by the library are documented in detail in
- * the following sections:
- *
- * - @ref Enumeration (obtaining a list of serial ports on the system)
- * - @ref Ports (opening, closing and getting information about ports)
- * - @ref Configuration (baud rate, parity, etc.)
- * - @ref Signals (modem control lines, breaks, etc.)
- * - @ref Data (reading and writing data, and buffer management)
- * - @ref Waiting (waiting for ports to be ready, integrating with event loops)
- * - @ref Errors (getting error and debugging information)
- *
- * Data structures
- * ---------------
- *
- * The library defines three data structures:
- *
- * - @ref sp_port, which represents a serial port.
- * See @ref Enumeration.
- * - @ref sp_port_config, which represents a port configuration.
- * See @ref Configuration.
- * - @ref sp_event_set, which represents a set of events.
- * See @ref Waiting.
- *
- * All these structures are allocated and freed by library functions. It is
- * the caller's responsibility to ensure that the correct calls are made to
- * free allocated structures after use.
- *
- * Return codes and error handling
- * -------------------------------
- *
- * Most functions have return type @ref sp_return and can return only four
- * possible error values:
- *
- * - @ref SP_ERR_ARG means that a function was called with invalid
- * arguments. This implies a bug in the caller. The arguments passed would
- * be invalid regardless of the underlying OS or serial device involved.
- *
- * - @ref SP_ERR_FAIL means that the OS reported a failure. The error code or
- * message provided by the OS can be obtained by calling sp_last_error_code()
- * or sp_last_error_message().
- *
- * - @ref SP_ERR_SUPP indicates that there is no support for the requested
- * operation in the current OS, driver or device. No error message is
- * available from the OS in this case. There is either no way to request
- * the operation in the first place, or libserialport does not know how to
- * do so in the current version.
- *
- * - @ref SP_ERR_MEM indicates that a memory allocation failed.
- *
- * All of these error values are negative.
- *
- * Calls that succeed return @ref SP_OK, which is equal to zero. Some functions
- * declared @ref sp_return can also return a positive value for a successful
- * numeric result, e.g. sp_blocking_read() or sp_blocking_write().
- *
- * An error message is only available via sp_last_error_message() in the case
- * where @ref SP_ERR_FAIL was returned by the previous function call. The error
- * message returned is that provided by the OS, using the current language
- * settings. It is an error to call sp_last_error_code() or
- * sp_last_error_message() except after a previous function call returned
- * @ref SP_ERR_FAIL. The library does not define its own error codes or
- * messages to accompany other return codes.
- *
- * Thread safety
- * -------------
- *
- * Certain combinations of calls can be made concurrently, as follows.
- *
- * - Calls using different ports may always be made concurrently, i.e.
- * it is safe for separate threads to handle their own ports.
- *
- * - Calls using the same port may be made concurrently when one call
- * is a read operation and one call is a write operation, i.e. it is safe
- * to use separate "reader" and "writer" threads for the same port. See
- * below for which operations meet these definitions.
- *
- * Read operations:
- *
- * - sp_blocking_read()
- * - sp_blocking_read_next()
- * - sp_nonblocking_read()
- * - sp_input_waiting()
- * - sp_flush() with @ref SP_BUF_INPUT only.
- * - sp_wait() with @ref SP_EVENT_RX_READY only.
- *
- * Write operations:
- *
- * - sp_blocking_write()
- * - sp_nonblocking_write()
- * - sp_output_waiting()
- * - sp_drain()
- * - sp_flush() with @ref SP_BUF_OUTPUT only.
- * - sp_wait() with @ref SP_EVENT_TX_READY only.
- *
- * If two calls, on the same port, do not fit into one of these categories
- * each, then they may not be made concurrently.
- *
- * Debugging
- * ---------
- *
- * The library can output extensive tracing and debugging information. The
- * simplest way to use this is to set the environment variable
- * @c LIBSERIALPORT_DEBUG to any value; messages will then be output to the
- * standard error stream.
- *
- * This behaviour is implemented by a default debug message handling
- * callback. An alternative callback can be set using sp_set_debug_handler(),
- * in order to e.g. redirect the output elsewhere or filter it.
- *
- * No guarantees are made about the content of the debug output; it is chosen
- * to suit the needs of the developers and may change between releases.
- *
- * @anchor Porting
- * Porting
- * -------
- *
- * The following guidelines may help when porting existing OS-specific code
- * to use libserialport.
- *
- * ### Porting from Unix-like systems ###
- *
- * There are two main differences to note when porting code written for Unix.
- *
- * The first is that Unix traditionally provides a wide range of functionality
- * for dealing with serial devices at the OS level; this is exposed through the
- * termios API and dates to the days when serial terminals were common. If your
- * code relies on many of these facilities you will need to adapt it, because
- * libserialport provides only a raw binary channel with no special handling.
- *
- * The second relates to blocking versus non-blocking I/O behaviour. In
- * Unix-like systems this is normally specified by setting the @c O_NONBLOCK
- * flag on the file descriptor, affecting the semantics of subsequent @c read()
- * and @c write() calls.
- *
- * In libserialport, blocking and nonblocking operations are both available at
- * any time. If your existing code Ń•ets @c O_NONBLOCK, you should use
- * sp_nonblocking_read() and sp_nonblocking_write() to get the same behaviour
- * as your existing @c read() and @c write() calls. If it does not, you should
- * use sp_blocking_read() and sp_blocking_write() instead. You may also find
- * sp_blocking_read_next() useful, which reproduces the semantics of a blocking
- * read() with @c VTIME=0 and @c VMIN=1 set in termios.
- *
- * Finally, you should take care if your program uses custom signal handlers.
- * The blocking calls provided by libserialport will restart system calls that
- * return with @c EINTR, so you will need to make your own arrangements if you
- * need to interrupt blocking operations when your signal handlers are called.
- * This is not an issue if you only use the default handlers.
- *
- * ### Porting from Windows ###
- *
- * The main consideration when porting from Windows is that there is no
- * direct equivalent for overlapped I/O operations.
- *
- * If your program does not use overlapped I/O, you can simply use
- * sp_blocking_read() and sp_blocking_write() as direct equivalents for
- * @c ReadFile() and @c WriteFile(). You may also find sp_blocking_read_next()
- * useful, which reproduces the special semantics of @c ReadFile() with
- * @c ReadIntervalTimeout and @c ReadTotalTimeoutMultiplier set to @c MAXDWORD
- * and @c ReadTotalTimeoutConstant set to between @c 1 and @c MAXDWORD-1 .
- *
- * If your program makes use of overlapped I/O to continue work while a serial
- * operation is in progress, then you can achieve the same results using
- * sp_nonblocking_read() and sp_nonblocking_write().
- *
- * Generally, overlapped I/O is combined with either waiting for completion
- * once there is no more background work to do (using @c WaitForSingleObject()
- * or @c WaitForMultipleObjects()), or periodically checking for completion
- * with @c GetOverlappedResult(). If the aim is to start a new operation for
- * further data once the previous one has completed, you can instead simply
- * call the nonblocking functions again with the next data. If you need to
- * wait for completion, use sp_wait() to determine when the port is ready to
- * send or receive further data.
- */
-
-#ifndef LIBSERIALPORT_LIBSERIALPORT_H
-#define LIBSERIALPORT_LIBSERIALPORT_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stddef.h>
-
-/** Return values. */
-enum sp_return {
- /** Operation completed successfully. */
- SP_OK = 0,
- /** Invalid arguments were passed to the function. */
- SP_ERR_ARG = -1,
- /** A system error occurred while executing the operation. */
- SP_ERR_FAIL = -2,
- /** A memory allocation failed while executing the operation. */
- SP_ERR_MEM = -3,
- /** The requested operation is not supported by this system or device. */
- SP_ERR_SUPP = -4
-};
-
-/** Port access modes. */
-enum sp_mode {
- /** Open port for read access. */
- SP_MODE_READ = 1,
- /** Open port for write access. */
- SP_MODE_WRITE = 2,
- /** Open port for read and write access. @since 0.1.1 */
- SP_MODE_READ_WRITE = 3
-};
-
-/** Port events. */
-enum sp_event {
- /** Data received and ready to read. */
- SP_EVENT_RX_READY = 1,
- /** Ready to transmit new data. */
- SP_EVENT_TX_READY = 2,
- /** Error occurred. */
- SP_EVENT_ERROR = 4
-};
-
-/** Buffer selection. */
-enum sp_buffer {
- /** Input buffer. */
- SP_BUF_INPUT = 1,
- /** Output buffer. */
- SP_BUF_OUTPUT = 2,
- /** Both buffers. */
- SP_BUF_BOTH = 3
-};
-
-/** Parity settings. */
-enum sp_parity {
- /** Special value to indicate setting should be left alone. */
- SP_PARITY_INVALID = -1,
- /** No parity. */
- SP_PARITY_NONE = 0,
- /** Odd parity. */
- SP_PARITY_ODD = 1,
- /** Even parity. */
- SP_PARITY_EVEN = 2,
- /** Mark parity. */
- SP_PARITY_MARK = 3,
- /** Space parity. */
- SP_PARITY_SPACE = 4
-};
-
-/** RTS pin behaviour. */
-enum sp_rts {
- /** Special value to indicate setting should be left alone. */
- SP_RTS_INVALID = -1,
- /** RTS off. */
- SP_RTS_OFF = 0,
- /** RTS on. */
- SP_RTS_ON = 1,
- /** RTS used for flow control. */
- SP_RTS_FLOW_CONTROL = 2
-};
-
-/** CTS pin behaviour. */
-enum sp_cts {
- /** Special value to indicate setting should be left alone. */
- SP_CTS_INVALID = -1,
- /** CTS ignored. */
- SP_CTS_IGNORE = 0,
- /** CTS used for flow control. */
- SP_CTS_FLOW_CONTROL = 1
-};
-
-/** DTR pin behaviour. */
-enum sp_dtr {
- /** Special value to indicate setting should be left alone. */
- SP_DTR_INVALID = -1,
- /** DTR off. */
- SP_DTR_OFF = 0,
- /** DTR on. */
- SP_DTR_ON = 1,
- /** DTR used for flow control. */
- SP_DTR_FLOW_CONTROL = 2
-};
-
-/** DSR pin behaviour. */
-enum sp_dsr {
- /** Special value to indicate setting should be left alone. */
- SP_DSR_INVALID = -1,
- /** DSR ignored. */
- SP_DSR_IGNORE = 0,
- /** DSR used for flow control. */
- SP_DSR_FLOW_CONTROL = 1
-};
-
-/** XON/XOFF flow control behaviour. */
-enum sp_xonxoff {
- /** Special value to indicate setting should be left alone. */
- SP_XONXOFF_INVALID = -1,
- /** XON/XOFF disabled. */
- SP_XONXOFF_DISABLED = 0,
- /** XON/XOFF enabled for input only. */
- SP_XONXOFF_IN = 1,
- /** XON/XOFF enabled for output only. */
- SP_XONXOFF_OUT = 2,
- /** XON/XOFF enabled for input and output. */
- SP_XONXOFF_INOUT = 3
-};
-
-/** Standard flow control combinations. */
-enum sp_flowcontrol {
- /** No flow control. */
- SP_FLOWCONTROL_NONE = 0,
- /** Software flow control using XON/XOFF characters. */
- SP_FLOWCONTROL_XONXOFF = 1,
- /** Hardware flow control using RTS/CTS signals. */
- SP_FLOWCONTROL_RTSCTS = 2,
- /** Hardware flow control using DTR/DSR signals. */
- SP_FLOWCONTROL_DTRDSR = 3
-};
-
-/** Input signals. */
-enum sp_signal {
- /** Clear to send. */
- SP_SIG_CTS = 1,
- /** Data set ready. */
- SP_SIG_DSR = 2,
- /** Data carrier detect. */
- SP_SIG_DCD = 4,
- /** Ring indicator. */
- SP_SIG_RI = 8
-};
-
-/**
- * Transport types.
- *
- * @since 0.1.1
- */
-enum sp_transport {
- /** Native platform serial port. @since 0.1.1 */
- SP_TRANSPORT_NATIVE,
- /** USB serial port adapter. @since 0.1.1 */
- SP_TRANSPORT_USB,
- /** Bluetooth serial port adapter. @since 0.1.1 */
- SP_TRANSPORT_BLUETOOTH
-};
-
-/**
- * @struct sp_port
- * An opaque structure representing a serial port.
- */
-struct sp_port;
-
-/**
- * @struct sp_port_config
- * An opaque structure representing the configuration for a serial port.
- */
-struct sp_port_config;
-
-/**
- * @struct sp_event_set
- * A set of handles to wait on for events.
- */
-struct sp_event_set {
- /** Array of OS-specific handles. */
- void *handles;
- /** Array of bitmasks indicating which events apply for each handle. */
- enum sp_event *masks;
- /** Number of handles. */
- unsigned int count;
-};
-
-/**
- * @defgroup Enumeration Port enumeration
- *
- * Enumerating the serial ports of a system.
- *
- * See @ref list_ports.c for a working example of port enumeration.
- *
- * @{
- */
-
-/**
- * Obtain a pointer to a new sp_port structure representing the named port.
- *
- * The user should allocate a variable of type "struct sp_port *" and pass a
- * pointer to this to receive the result.
- *
- * The result should be freed after use by calling sp_free_port().
- *
- * @param[in] portname The OS-specific name of a serial port. Must not be NULL.
- * @param[out] port_ptr If any error is returned, the variable pointed to by
- * port_ptr will be set to NULL. Otherwise, it will be set
- * to point to the newly allocated port. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_port_by_name(const char *portname, struct sp_port **port_ptr);
-
-/**
- * Free a port structure obtained from sp_get_port_by_name() or sp_copy_port().
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @since 0.1.0
- */
-void sp_free_port(struct sp_port *port);
-
-/**
- * List the serial ports available on the system.
- *
- * The result obtained is an array of pointers to sp_port structures,
- * terminated by a NULL. The user should allocate a variable of type
- * "struct sp_port **" and pass a pointer to this to receive the result.
- *
- * The result should be freed after use by calling sp_free_port_list().
- * If a port from the list is to be used after freeing the list, it must be
- * copied first using sp_copy_port().
- *
- * @param[out] list_ptr If any error is returned, the variable pointed to by
- * list_ptr will be set to NULL. Otherwise, it will be set
- * to point to the newly allocated array. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_list_ports(struct sp_port ***list_ptr);
-
-/**
- * Make a new copy of an sp_port structure.
- *
- * The user should allocate a variable of type "struct sp_port *" and pass a
- * pointer to this to receive the result.
- *
- * The copy should be freed after use by calling sp_free_port().
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] copy_ptr If any error is returned, the variable pointed to by
- * copy_ptr will be set to NULL. Otherwise, it will be set
- * to point to the newly allocated copy. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_copy_port(const struct sp_port *port, struct sp_port **copy_ptr);
-
-/**
- * Free a port list obtained from sp_list_ports().
- *
- * This will also free all the sp_port structures referred to from the list;
- * any that are to be retained must be copied first using sp_copy_port().
- *
- * @param[in] ports Pointer to a list of port structures. Must not be NULL.
- *
- * @since 0.1.0
- */
-void sp_free_port_list(struct sp_port **ports);
-
-/**
- * @}
- * @defgroup Ports Port handling
- *
- * Opening, closing and querying ports.
- *
- * See @ref port_info.c for a working example of getting port information.
- *
- * @{
- */
-
-/**
- * Open the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] flags Flags to use when opening the serial port.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_open(struct sp_port *port, enum sp_mode flags);
-
-/**
- * Close the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_close(struct sp_port *port);
-
-/**
- * Get the name of a port.
- *
- * The name returned is whatever is normally used to refer to a port on the
- * current operating system; e.g. for Windows it will usually be a "COMn"
- * device name, and for Unix it will be a device path beginning with "/dev/".
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port name, or NULL if an invalid port is passed. The name
- * string is part of the port structure and may not be used after
- * the port structure has been freed.
- *
- * @since 0.1.0
- */
-char *sp_get_port_name(const struct sp_port *port);
-
-/**
- * Get a description for a port, to present to end user.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port description, or NULL if an invalid port is passed.
- * The description string is part of the port structure and may not
- * be used after the port structure has been freed.
- *
- * @since 0.1.1
- */
-char *sp_get_port_description(const struct sp_port *port);
-
-/**
- * Get the transport type used by a port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port transport type.
- *
- * @since 0.1.1
- */
-enum sp_transport sp_get_port_transport(const struct sp_port *port);
-
-/**
- * Get the USB bus number and address on bus of a USB serial adapter port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] usb_bus Pointer to a variable to store the USB bus.
- * Can be NULL (in that case it will be ignored).
- * @param[out] usb_address Pointer to a variable to store the USB address.
- * Can be NULL (in that case it will be ignored).
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.1
- */
-enum sp_return sp_get_port_usb_bus_address(const struct sp_port *port,
- int *usb_bus, int *usb_address);
-
-/**
- * Get the USB Vendor ID and Product ID of a USB serial adapter port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] usb_vid Pointer to a variable to store the USB VID.
- * Can be NULL (in that case it will be ignored).
- * @param[out] usb_pid Pointer to a variable to store the USB PID.
- * Can be NULL (in that case it will be ignored).
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.1
- */
-enum sp_return sp_get_port_usb_vid_pid(const struct sp_port *port, int *usb_vid, int *usb_pid);
-
-/**
- * Get the USB manufacturer string of a USB serial adapter port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port manufacturer string, or NULL if an invalid port is passed.
- * The manufacturer string is part of the port structure and may not
- * be used after the port structure has been freed.
- *
- * @since 0.1.1
- */
-char *sp_get_port_usb_manufacturer(const struct sp_port *port);
-
-/**
- * Get the USB product string of a USB serial adapter port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port product string, or NULL if an invalid port is passed.
- * The product string is part of the port structure and may not be
- * used after the port structure has been freed.
- *
- * @since 0.1.1
- */
-char *sp_get_port_usb_product(const struct sp_port *port);
-
-/**
- * Get the USB serial number string of a USB serial adapter port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port serial number, or NULL if an invalid port is passed.
- * The serial number string is part of the port structure and may
- * not be used after the port structure has been freed.
- *
- * @since 0.1.1
- */
-char *sp_get_port_usb_serial(const struct sp_port *port);
-
-/**
- * Get the MAC address of a Bluetooth serial adapter port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return The port MAC address, or NULL if an invalid port is passed.
- * The MAC address string is part of the port structure and may not
- * be used after the port structure has been freed.
- *
- * @since 0.1.1
- */
-char *sp_get_port_bluetooth_address(const struct sp_port *port);
-
-/**
- * Get the operating system handle for a port.
- *
- * The type of the handle depends on the operating system. On Unix based
- * systems, the handle is a file descriptor of type "int". On Windows, the
- * handle is of type "HANDLE". The user should allocate a variable of the
- * appropriate type and pass a pointer to this to receive the result.
- *
- * To obtain a valid handle, the port must first be opened by calling
- * sp_open() using the same port structure.
- *
- * After the port is closed or the port structure freed, the handle may
- * no longer be valid.
- *
- * @warning This feature is provided so that programs may make use of
- * OS-specific functionality where desired. Doing so obviously
- * comes at a cost in portability. It also cannot be guaranteed
- * that direct usage of the OS handle will not conflict with the
- * library's own usage of the port. Be careful.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] result_ptr If any error is returned, the variable pointed to by
- * result_ptr will have unknown contents and should not
- * be used. Otherwise, it will be set to point to the
- * OS handle. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_port_handle(const struct sp_port *port, void *result_ptr);
-
-/**
- * @}
- *
- * @defgroup Configuration Configuration
- *
- * Setting and querying serial port parameters.
- * @{
- */
-
-/**
- * Allocate a port configuration structure.
- *
- * The user should allocate a variable of type "struct sp_port_config *" and
- * pass a pointer to this to receive the result. The variable will be updated
- * to point to the new configuration structure. The structure is opaque and
- * must be accessed via the functions provided.
- *
- * All parameters in the structure will be initialised to special values which
- * are ignored by sp_set_config().
- *
- * The structure should be freed after use by calling sp_free_config().
- *
- * @param[out] config_ptr If any error is returned, the variable pointed to by
- * config_ptr will be set to NULL. Otherwise, it will
- * be set to point to the allocated config structure.
- * Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_new_config(struct sp_port_config **config_ptr);
-
-/**
- * Free a port configuration structure.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- *
- * @since 0.1.0
- */
-void sp_free_config(struct sp_port_config *config);
-
-/**
- * Get the current configuration of the specified serial port.
- *
- * The user should allocate a configuration structure using sp_new_config()
- * and pass this as the config parameter. The configuration structure will
- * be updated with the port configuration.
- *
- * Any parameters that are configured with settings not recognised or
- * supported by libserialport, will be set to special values that are
- * ignored by sp_set_config().
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] config Pointer to a configuration structure that will hold
- * the result. Upon errors the contents of the config
- * struct will not be changed. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config(struct sp_port *port, struct sp_port_config *config);
-
-/**
- * Set the configuration for the specified serial port.
- *
- * For each parameter in the configuration, there is a special value (usually
- * -1, but see the documentation for each field). These values will be ignored
- * and the corresponding setting left unchanged on the port.
- *
- * Upon errors, the configuration of the serial port is unknown since
- * partial/incomplete config updates may have happened.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config(struct sp_port *port, const struct sp_port_config *config);
-
-/**
- * Set the baud rate for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] baudrate Baud rate in bits per second.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_baudrate(struct sp_port *port, int baudrate);
-
-/**
- * Get the baud rate from a port configuration.
- *
- * The user should allocate a variable of type int and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] baudrate_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_baudrate(const struct sp_port_config *config, int *baudrate_ptr);
-
-/**
- * Set the baud rate in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] baudrate Baud rate in bits per second, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_baudrate(struct sp_port_config *config, int baudrate);
-
-/**
- * Set the data bits for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] bits Number of data bits.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_bits(struct sp_port *port, int bits);
-
-/**
- * Get the data bits from a port configuration.
- *
- * The user should allocate a variable of type int and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] bits_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_bits(const struct sp_port_config *config, int *bits_ptr);
-
-/**
- * Set the data bits in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] bits Number of data bits, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_bits(struct sp_port_config *config, int bits);
-
-/**
- * Set the parity setting for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] parity Parity setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_parity(struct sp_port *port, enum sp_parity parity);
-
-/**
- * Get the parity setting from a port configuration.
- *
- * The user should allocate a variable of type enum sp_parity and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] parity_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_parity(const struct sp_port_config *config, enum sp_parity *parity_ptr);
-
-/**
- * Set the parity setting in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] parity Parity setting, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_parity(struct sp_port_config *config, enum sp_parity parity);
-
-/**
- * Set the stop bits for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] stopbits Number of stop bits.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_stopbits(struct sp_port *port, int stopbits);
-
-/**
- * Get the stop bits from a port configuration.
- *
- * The user should allocate a variable of type int and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] stopbits_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_stopbits(const struct sp_port_config *config, int *stopbits_ptr);
-
-/**
- * Set the stop bits in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] stopbits Number of stop bits, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_stopbits(struct sp_port_config *config, int stopbits);
-
-/**
- * Set the RTS pin behaviour for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] rts RTS pin mode.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_rts(struct sp_port *port, enum sp_rts rts);
-
-/**
- * Get the RTS pin behaviour from a port configuration.
- *
- * The user should allocate a variable of type enum sp_rts and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] rts_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_rts(const struct sp_port_config *config, enum sp_rts *rts_ptr);
-
-/**
- * Set the RTS pin behaviour in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] rts RTS pin mode, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_rts(struct sp_port_config *config, enum sp_rts rts);
-
-/**
- * Set the CTS pin behaviour for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] cts CTS pin mode.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_cts(struct sp_port *port, enum sp_cts cts);
-
-/**
- * Get the CTS pin behaviour from a port configuration.
- *
- * The user should allocate a variable of type enum sp_cts and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] cts_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_cts(const struct sp_port_config *config, enum sp_cts *cts_ptr);
-
-/**
- * Set the CTS pin behaviour in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] cts CTS pin mode, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_cts(struct sp_port_config *config, enum sp_cts cts);
-
-/**
- * Set the DTR pin behaviour for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] dtr DTR pin mode.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_dtr(struct sp_port *port, enum sp_dtr dtr);
-
-/**
- * Get the DTR pin behaviour from a port configuration.
- *
- * The user should allocate a variable of type enum sp_dtr and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] dtr_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_dtr(const struct sp_port_config *config, enum sp_dtr *dtr_ptr);
-
-/**
- * Set the DTR pin behaviour in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] dtr DTR pin mode, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_dtr(struct sp_port_config *config, enum sp_dtr dtr);
-
-/**
- * Set the DSR pin behaviour for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] dsr DSR pin mode.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_dsr(struct sp_port *port, enum sp_dsr dsr);
-
-/**
- * Get the DSR pin behaviour from a port configuration.
- *
- * The user should allocate a variable of type enum sp_dsr and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] dsr_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_dsr(const struct sp_port_config *config, enum sp_dsr *dsr_ptr);
-
-/**
- * Set the DSR pin behaviour in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] dsr DSR pin mode, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_dsr(struct sp_port_config *config, enum sp_dsr dsr);
-
-/**
- * Set the XON/XOFF configuration for the specified serial port.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] xon_xoff XON/XOFF mode.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_xon_xoff(struct sp_port *port, enum sp_xonxoff xon_xoff);
-
-/**
- * Get the XON/XOFF configuration from a port configuration.
- *
- * The user should allocate a variable of type enum sp_xonxoff and
- * pass a pointer to this to receive the result.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[out] xon_xoff_ptr Pointer to a variable to store the result. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_config_xon_xoff(const struct sp_port_config *config, enum sp_xonxoff *xon_xoff_ptr);
-
-/**
- * Set the XON/XOFF configuration in a port configuration.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] xon_xoff XON/XOFF mode, or -1 to retain the current setting.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_xon_xoff(struct sp_port_config *config, enum sp_xonxoff xon_xoff);
-
-/**
- * Set the flow control type in a port configuration.
- *
- * This function is a wrapper that sets the RTS, CTS, DTR, DSR and
- * XON/XOFF settings as necessary for the specified flow control
- * type. For more fine-grained control of these settings, use their
- * individual configuration functions.
- *
- * @param[in] config Pointer to a configuration structure. Must not be NULL.
- * @param[in] flowcontrol Flow control setting to use.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_config_flowcontrol(struct sp_port_config *config, enum sp_flowcontrol flowcontrol);
-
-/**
- * Set the flow control type for the specified serial port.
- *
- * This function is a wrapper that sets the RTS, CTS, DTR, DSR and
- * XON/XOFF settings as necessary for the specified flow control
- * type. For more fine-grained control of these settings, use their
- * individual configuration functions.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] flowcontrol Flow control setting to use.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_set_flowcontrol(struct sp_port *port, enum sp_flowcontrol flowcontrol);
-
-/**
- * @}
- *
- * @defgroup Data Data handling
- *
- * Reading, writing, and flushing data.
- *
- * @{
- */
-
-/**
- * Read bytes from the specified serial port, blocking until complete.
- *
- * @warning If your program runs on Unix, defines its own signal handlers, and
- * needs to abort blocking reads when these are called, then you
- * should not use this function. It repeats system calls that return
- * with EINTR. To be able to abort a read from a signal handler, you
- * should implement your own blocking read using sp_nonblocking_read()
- * together with a blocking method that makes sense for your program.
- * E.g. you can obtain the file descriptor for an open port using
- * sp_get_port_handle() and use this to call select() or pselect(),
- * with appropriate arrangements to return if a signal is received.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
- * @param[in] count Requested number of bytes to read.
- * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
- *
- * @return The number of bytes read on success, or a negative error code. If
- * the number of bytes returned is less than that requested, the
- * timeout was reached before the requested number of bytes was
- * available. If timeout is zero, the function will always return
- * either the requested number of bytes or a negative error code.
- *
- * @since 0.1.0
- */
-enum sp_return sp_blocking_read(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms);
-
-/**
- * Read bytes from the specified serial port, returning as soon as any data is
- * available.
- *
- * @warning If your program runs on Unix, defines its own signal handlers, and
- * needs to abort blocking reads when these are called, then you
- * should not use this function. It repeats system calls that return
- * with EINTR. To be able to abort a read from a signal handler, you
- * should implement your own blocking read using sp_nonblocking_read()
- * together with a blocking method that makes sense for your program.
- * E.g. you can obtain the file descriptor for an open port using
- * sp_get_port_handle() and use this to call select() or pselect(),
- * with appropriate arrangements to return if a signal is received.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
- * @param[in] count Maximum number of bytes to read. Must not be zero.
- * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
- *
- * @return The number of bytes read on success, or a negative error code. If
- * the result is zero, the timeout was reached before any bytes were
- * available. If timeout_ms is zero, the function will always return
- * either at least one byte, or a negative error code.
- *
- * @since 0.1.1
- */
-enum sp_return sp_blocking_read_next(struct sp_port *port, void *buf, size_t count, unsigned int timeout_ms);
-
-/**
- * Read bytes from the specified serial port, without blocking.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] buf Buffer in which to store the bytes read. Must not be NULL.
- * @param[in] count Maximum number of bytes to read.
- *
- * @return The number of bytes read on success, or a negative error code. The
- * number of bytes returned may be any number from zero to the maximum
- * that was requested.
- *
- * @since 0.1.0
- */
-enum sp_return sp_nonblocking_read(struct sp_port *port, void *buf, size_t count);
-
-/**
- * Write bytes to the specified serial port, blocking until complete.
- *
- * Note that this function only ensures that the accepted bytes have been
- * written to the OS; they may be held in driver or hardware buffers and not
- * yet physically transmitted. To check whether all written bytes have actually
- * been transmitted, use the sp_output_waiting() function. To wait until all
- * written bytes have actually been transmitted, use the sp_drain() function.
- *
- * @warning If your program runs on Unix, defines its own signal handlers, and
- * needs to abort blocking writes when these are called, then you
- * should not use this function. It repeats system calls that return
- * with EINTR. To be able to abort a write from a signal handler, you
- * should implement your own blocking write using sp_nonblocking_write()
- * together with a blocking method that makes sense for your program.
- * E.g. you can obtain the file descriptor for an open port using
- * sp_get_port_handle() and use this to call select() or pselect(),
- * with appropriate arrangements to return if a signal is received.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] buf Buffer containing the bytes to write. Must not be NULL.
- * @param[in] count Requested number of bytes to write.
- * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
- *
- * @return The number of bytes written on success, or a negative error code.
- * If the number of bytes returned is less than that requested, the
- * timeout was reached before the requested number of bytes was
- * written. If timeout is zero, the function will always return
- * either the requested number of bytes or a negative error code. In
- * the event of an error there is no way to determine how many bytes
- * were sent before the error occurred.
- *
- * @since 0.1.0
- */
-enum sp_return sp_blocking_write(struct sp_port *port, const void *buf, size_t count, unsigned int timeout_ms);
-
-/**
- * Write bytes to the specified serial port, without blocking.
- *
- * Note that this function only ensures that the accepted bytes have been
- * written to the OS; they may be held in driver or hardware buffers and not
- * yet physically transmitted. To check whether all written bytes have actually
- * been transmitted, use the sp_output_waiting() function. To wait until all
- * written bytes have actually been transmitted, use the sp_drain() function.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] buf Buffer containing the bytes to write. Must not be NULL.
- * @param[in] count Maximum number of bytes to write.
- *
- * @return The number of bytes written on success, or a negative error code.
- * The number of bytes returned may be any number from zero to the
- * maximum that was requested.
- *
- * @since 0.1.0
- */
-enum sp_return sp_nonblocking_write(struct sp_port *port, const void *buf, size_t count);
-
-/**
- * Gets the number of bytes waiting in the input buffer.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return Number of bytes waiting on success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_input_waiting(struct sp_port *port);
-
-/**
- * Gets the number of bytes waiting in the output buffer.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return Number of bytes waiting on success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_output_waiting(struct sp_port *port);
-
-/**
- * Flush serial port buffers. Data in the selected buffer(s) is discarded.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] buffers Which buffer(s) to flush.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_flush(struct sp_port *port, enum sp_buffer buffers);
-
-/**
- * Wait for buffered data to be transmitted.
- *
- * @warning If your program runs on Unix, defines its own signal handlers, and
- * needs to abort draining the output buffer when when these are
- * called, then you should not use this function. It repeats system
- * calls that return with EINTR. To be able to abort a drain from a
- * signal handler, you would need to implement your own blocking
- * drain by polling the result of sp_output_waiting().
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_drain(struct sp_port *port);
-
-/**
- * @}
- *
- * @defgroup Waiting Waiting
- *
- * Waiting for events and timeout handling.
- *
- * @{
- */
-
-/**
- * Allocate storage for a set of events.
- *
- * The user should allocate a variable of type struct sp_event_set *,
- * then pass a pointer to this variable to receive the result.
- *
- * The result should be freed after use by calling sp_free_event_set().
- *
- * @param[out] result_ptr If any error is returned, the variable pointed to by
- * result_ptr will be set to NULL. Otherwise, it will
- * be set to point to the event set. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_new_event_set(struct sp_event_set **result_ptr);
-
-/**
- * Add events to a struct sp_event_set for a given port.
- *
- * The port must first be opened by calling sp_open() using the same port
- * structure.
- *
- * After the port is closed or the port structure freed, the results may
- * no longer be valid.
- *
- * @param[in,out] event_set Event set to update. Must not be NULL.
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[in] mask Bitmask of events to be waited for.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_add_port_events(struct sp_event_set *event_set,
- const struct sp_port *port, enum sp_event mask);
-
-/**
- * Wait for any of a set of events to occur.
- *
- * @param[in] event_set Event set to wait on. Must not be NULL.
- * @param[in] timeout_ms Timeout in milliseconds, or zero to wait indefinitely.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_wait(struct sp_event_set *event_set, unsigned int timeout_ms);
-
-/**
- * Free a structure allocated by sp_new_event_set().
- *
- * @param[in] event_set Event set to free. Must not be NULL.
- *
- * @since 0.1.0
- */
-void sp_free_event_set(struct sp_event_set *event_set);
-
-/**
- * @}
- *
- * @defgroup Signals Signals
- *
- * Port signalling operations.
- *
- * @{
- */
-
-/**
- * Gets the status of the control signals for the specified port.
- *
- * The user should allocate a variable of type "enum sp_signal" and pass a
- * pointer to this variable to receive the result. The result is a bitmask
- * in which individual signals can be checked by bitwise OR with values of
- * the sp_signal enum.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- * @param[out] signal_mask Pointer to a variable to receive the result.
- * Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_get_signals(struct sp_port *port, enum sp_signal *signal_mask);
-
-/**
- * Put the port transmit line into the break state.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_start_break(struct sp_port *port);
-
-/**
- * Take the port transmit line out of the break state.
- *
- * @param[in] port Pointer to a port structure. Must not be NULL.
- *
- * @return SP_OK upon success, a negative error code otherwise.
- *
- * @since 0.1.0
- */
-enum sp_return sp_end_break(struct sp_port *port);
-
-/**
- * @}
- *
- * @defgroup Errors Errors
- *
- * Obtaining error information.
- *
- * @{
- */
-
-/**
- * Get the error code for a failed operation.
- *
- * In order to obtain the correct result, this function should be called
- * straight after the failure, before executing any other system operations.
- * The result is thread-specific, and only valid when called immediately
- * after a previous call returning SP_ERR_FAIL.
- *
- * @return The system's numeric code for the error that caused the last
- * operation to fail.
- *
- * @since 0.1.0
- */
-int sp_last_error_code(void);
-
-/**
- * Get the error message for a failed operation.
- *
- * In order to obtain the correct result, this function should be called
- * straight after the failure, before executing other system operations.
- * The result is thread-specific, and only valid when called immediately
- * after a previous call returning SP_ERR_FAIL.
- *
- * @return The system's message for the error that caused the last
- * operation to fail. This string may be allocated by the function,
- * and should be freed after use by calling sp_free_error_message().
- *
- * @since 0.1.0
- */
-char *sp_last_error_message(void);
-
-/**
- * Free an error message returned by sp_last_error_message().
- *
- * @param[in] message The error message string to free. Must not be NULL.
- *
- * @since 0.1.0
- */
-void sp_free_error_message(char *message);
-
-/**
- * Set the handler function for library debugging messages.
- *
- * Debugging messages are generated by the library during each operation,
- * to help in diagnosing problems. The handler will be called for each
- * message. The handler can be set to NULL to ignore all debug messages.
- *
- * The handler function should accept a format string and variable length
- * argument list, in the same manner as e.g. printf().
- *
- * The default handler is sp_default_debug_handler().
- *
- * @param[in] handler The handler function to use. Can be NULL (in that case
- * all debug messages will be ignored).
- *
- * @since 0.1.0
- */
-void sp_set_debug_handler(void (*handler)(const char *format, ...));
-
-/**
- * Default handler function for library debugging messages.
- *
- * This function prints debug messages to the standard error stream if the
- * environment variable LIBSERIALPORT_DEBUG is set. Otherwise, they are
- * ignored.
- *
- * @param[in] format The format string to use. Must not be NULL.
- * @param[in] ... The variable length argument list to use.
- *
- * @since 0.1.0
- */
-void sp_default_debug_handler(const char *format, ...);
-
-/** @} */
-
-/**
- * @defgroup Versions Versions
- *
- * Version number querying functions, definitions, and macros.
- *
- * This set of API calls returns two different version numbers related
- * to libserialport. The "package version" is the release version number of the
- * libserialport tarball in the usual "major.minor.micro" format, e.g. "0.1.0".
- *
- * The "library version" is independent of that; it is the libtool version
- * number in the "current:revision:age" format, e.g. "2:0:0".
- * See http://www.gnu.org/software/libtool/manual/libtool.html#Libtool-versioning for details.
- *
- * Both version numbers (and/or individual components of them) can be
- * retrieved via the API calls at runtime, and/or they can be checked at
- * compile/preprocessor time using the respective macros.
- *
- * @{
- */
-
-/*
- * Package version macros (can be used for conditional compilation).
- */
-
-/** The libserialport package 'major' version number. */
-#undef SP_PACKAGE_VERSION_MAJOR
-
-/** The libserialport package 'minor' version number. */
-#undef SP_PACKAGE_VERSION_MINOR
-
-/** The libserialport package 'micro' version number. */
-#undef SP_PACKAGE_VERSION_MICRO
-
-/** The libserialport package version ("major.minor.micro") as string. */
-#undef SP_PACKAGE_VERSION_STRING
-
-/*
- * Library/libtool version macros (can be used for conditional compilation).
- */
-
-/** The libserialport libtool 'current' version number. */
-#undef SP_LIB_VERSION_CURRENT
-
-/** The libserialport libtool 'revision' version number. */
-#undef SP_LIB_VERSION_REVISION
-
-/** The libserialport libtool 'age' version number. */
-#undef SP_LIB_VERSION_AGE
-
-/** The libserialport libtool version ("current:revision:age") as string. */
-#undef SP_LIB_VERSION_STRING
-
-/**
- * Get the major libserialport package version number.
- *
- * @return The major package version number.
- *
- * @since 0.1.0
- */
-int sp_get_major_package_version(void);
-
-/**
- * Get the minor libserialport package version number.
- *
- * @return The minor package version number.
- *
- * @since 0.1.0
- */
-int sp_get_minor_package_version(void);
-
-/**
- * Get the micro libserialport package version number.
- *
- * @return The micro package version number.
- *
- * @since 0.1.0
- */
-int sp_get_micro_package_version(void);
-
-/**
- * Get the libserialport package version number as a string.
- *
- * @return The package version number string. The returned string is
- * static and thus should NOT be free'd by the caller.
- *
- * @since 0.1.0
- */
-const char *sp_get_package_version_string(void);
-
-/**
- * Get the "current" part of the libserialport library version number.
- *
- * @return The "current" library version number.
- *
- * @since 0.1.0
- */
-int sp_get_current_lib_version(void);
-
-/**
- * Get the "revision" part of the libserialport library version number.
- *
- * @return The "revision" library version number.
- *
- * @since 0.1.0
- */
-int sp_get_revision_lib_version(void);
-
-/**
- * Get the "age" part of the libserialport library version number.
- *
- * @return The "age" library version number.
- *
- * @since 0.1.0
- */
-int sp_get_age_lib_version(void);
-
-/**
- * Get the libserialport library version number as a string.
- *
- * @return The library version number string. The returned string is
- * static and thus should NOT be free'd by the caller.
- *
- * @since 0.1.0
- */
-const char *sp_get_lib_version_string(void);
-
-/** @} */
-
-/**
- * @example list_ports.c Getting a list of ports present on the system.
- * @example port_info.c Getting information on a particular serial port.
-*/
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
projects / libserialport.git / commitdiff