pkgdatadir = $(DECODERS_DIR)/onewire
-dist_pkgdata_DATA = __init__.py onewire.py
+dist_pkgdata_DATA = __init__.py onewire_link.py onewire_network.py
CLEANFILES = *.pyc
- define output protocol
'''
-from .onewire import *
+from .onewire_link import *
+from .onewire_network import *
+++ /dev/null
-##
-## This file is part of the sigrok project.
-##
-## Copyright (C) 2012 Iztok Jeras <iztok.jeras@gmail.com>
-##
-## This program is free software; you can redistribute it and/or modify
-## it under the terms of the GNU General Public License as published by
-## the Free Software Foundation; either version 2 of the License, or
-## (at your option) any later version.
-##
-## This program is distributed in the hope that it will be useful,
-## but WITHOUT ANY WARRANTY; without even the implied warranty of
-## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-## GNU General Public License for more details.
-##
-## You should have received a copy of the GNU General Public License
-## along with this program; if not, write to the Free Software
-## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-##
-
-# 1-Wire protocol decoder
-
-import sigrokdecode as srd
-
-# Annotation feed formats
-ANN_LINK = 0
-ANN_NETWORK = 1
-ANN_TRANSPORT = 2
-
-# a dictionary of ROM commands and their names
-rom_command = {0x33: "READ ROM",
- 0x0f: "CONDITIONAL READ ROM",
- 0xcc: "SKIP ROM",
- 0x55: "MATCH ROM",
- 0xf0: "SEARCH ROM",
- 0xec: "CONDITIONAL SEARCH ROM",
- 0x3c: "OVERDRIVE SKIP ROM",
- 0x6d: "OVERDRIVE MATCH ROM"}
-
-class Decoder(srd.Decoder):
- api_version = 1
- id = 'onewire'
- name = '1-Wire'
- longname = '1-Wire serial communication bus'
- desc = 'Bidirectional, half-duplex, asynchronous serial bus.'
- license = 'gplv2+'
- inputs = ['logic']
- outputs = ['onewire']
- probes = [
- {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire bus'},
- ]
- optional_probes = [
- {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power'},
- ]
- options = {
- 'overdrive' : ['Overdrive', 1],
- 'cnt_normal_bit' : ['Time (in samplerate periods) for normal mode sample bit' , 0],
- 'cnt_normal_presence' : ['Time (in samplerate periods) for normal mode sample presence', 0],
- 'cnt_normal_reset' : ['Time (in samplerate periods) for normal mode reset' , 0],
- 'cnt_overdrive_bit' : ['Time (in samplerate periods) for overdrive mode sample bit' , 0],
- 'cnt_overdrive_presence': ['Time (in samplerate periods) for overdrive mode sample presence', 0],
- 'cnt_overdrive_reset' : ['Time (in samplerate periods) for overdrive mode reset' , 0],
- }
- annotations = [
- ['Link', 'Link layer events (reset, presence, bit slots)'],
- ['Network', 'Network layer events (device addressing)'],
- ['Transport', 'Transport layer events'],
- ]
-
- def __init__(self, **kwargs):
- # Common variables
- self.samplenum = 0
- # Link layer variables
- self.lnk_state = 'WAIT FOR FALLING EDGE'
- self.lnk_event = 'NONE'
- self.lnk_present = 0
- self.lnk_bit = 0
- self.lnk_overdrive = 0
- # Event timing variables
- self.lnk_fall = 0
- self.lnk_rise = 0
- self.net_beg = 0
- self.net_end = 0
- self.net_len = 0
- # Network layer variables
- self.net_state = 'IDLE'
- self.net_cnt = 0
- self.net_search = "P"
- self.net_data_p = 0x0
- self.net_data_n = 0x0
- self.net_data = 0x0
- self.net_rom = 0x0000000000000000
-
- def start(self, metadata):
- self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire')
- self.out_ann = self.add(srd.OUTPUT_ANN , 'onewire')
-
- # check if samplerate is appropriate
- self.samplerate = metadata['samplerate']
- if (self.options['overdrive']):
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['NOTE: Sample rate checks assume overdrive mode.']])
- if (self.samplerate < 2000000):
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']])
- elif (self.samplerate < 5000000):
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']])
- else:
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['NOTE: Sample rate checks assume normal mode only.']])
- if (self.samplerate < 400000):
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']])
- elif (self.samplerate < 1000000):
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']])
-
- # The default 1-Wire time base is 30us, this is used to calculate sampling times.
- if (self.options['cnt_normal_bit']):
- self.cnt_normal_bit = self.options['cnt_normal_bit']
- else:
- self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns
- if (self.options['cnt_normal_presence']):
- self.cnt_normal_presence = self.options['cnt_normal_presence']
- else:
- self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns
- if (self.options['cnt_normal_reset']):
- self.cnt_normal_reset = self.options['cnt_normal_reset']
- else:
- self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns
- if (self.options['cnt_overdrive_bit']):
- self.cnt_overdrive_bit = self.options['cnt_overdrive_bit']
- else:
- self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns
- if (self.options['cnt_overdrive_presence']):
- self.cnt_overdrive_presence = self.options['cnt_overdrive_presence']
- else:
- self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns
- if (self.options['cnt_overdrive_reset']):
- self.cnt_overdrive_reset = self.options['cnt_overdrive_reset']
- else:
- self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns
-
- # calculating the slot size
- self.cnt_normal_slot = int(float(self.samplerate) * 0.000060) - 1 # 60ns
- self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 # 6ns
-
- # organize values into lists
- self.cnt_bit = [self.cnt_normal_bit , self.cnt_overdrive_bit ]
- self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence]
- self.cnt_reset = [self.cnt_normal_reset , self.cnt_overdrive_reset ]
- self.cnt_slot = [self.cnt_normal_slot , self.cnt_overdrive_slot ]
-
- # Check if sample times are in the allowed range
- time_min = float(self.cnt_normal_bit ) / self.samplerate
- time_max = float(self.cnt_normal_bit+1) / self.samplerate
- if ( (time_min < 0.000005) or (time_max > 0.000015) ) :
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).'
- % (time_min*1000000, time_max*1000000)]])
- time_min = float(self.cnt_normal_presence ) / self.samplerate
- time_max = float(self.cnt_normal_presence+1) / self.samplerate
- if ( (time_min < 0.0000681) or (time_max > 0.000075) ) :
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).'
- % (time_min*1000000, time_max*1000000)]])
- time_min = float(self.cnt_overdrive_bit ) / self.samplerate
- time_max = float(self.cnt_overdrive_bit+1) / self.samplerate
- if ( (time_min < 0.000001) or (time_max > 0.000002) ) :
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).'
- % (time_min*1000000, time_max*1000000)]])
- time_min = float(self.cnt_overdrive_presence ) / self.samplerate
- time_max = float(self.cnt_overdrive_presence+1) / self.samplerate
- if ( (time_min < 0.0000073) or (time_max > 0.000010) ) :
- self.put(0, 0, self.out_ann, [ANN_LINK,
- ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).'
- % (time_min*1000000, time_max*1000000)]])
-
- def report(self):
- pass
-
- def decode(self, ss, es, data):
- for (self.samplenum, (owr, pwr)) in data:
-
- # Data link layer
-
- # Clear events.
- self.lnk_event = "NONE"
- # State machine.
- if self.lnk_state == 'WAIT FOR FALLING EDGE':
- # The start of a cycle is a falling edge.
- if (owr == 0):
- # Save the sample number for the falling edge.
- self.lnk_fall = self.samplenum
- # Go to waiting for sample time
- self.lnk_state = 'WAIT FOR DATA SAMPLE'
- elif self.lnk_state == 'WAIT FOR DATA SAMPLE':
- # Sample data bit
- if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]):
- self.lnk_bit = owr & 0x1
- self.lnk_event = "DATA BIT"
- if (self.lnk_bit): self.lnk_state = 'WAIT FOR FALLING EDGE'
- else : self.lnk_state = 'WAIT FOR RISING EDGE'
- self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]])
- elif self.lnk_state == 'WAIT FOR RISING EDGE':
- # The end of a cycle is a rising edge.
- if (owr == 1):
- # Check if this was a reset cycle
- if (self.samplenum - self.lnk_fall > self.cnt_normal_reset):
- # Save the sample number for the falling edge.
- self.lnk_rise = self.samplenum
- # Send a reset event to the next protocol layer.
- self.lnk_event = "RESET"
- self.lnk_state = "WAIT FOR PRESENCE DETECT"
- self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET'])
- self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET']])
- self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET']])
- # Reset the timer.
- self.lnk_fall = self.samplenum
- elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)):
- # Save the sample number for the falling edge.
- self.lnk_rise = self.samplenum
- # Send a reset event to the next protocol layer.
- self.lnk_event = "RESET"
- self.lnk_state = "WAIT FOR PRESENCE DETECT"
- self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE'])
- self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']])
- self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']])
- # Reset the timer.
- self.lnk_fall = self.samplenum
- # Otherwise this is assumed to be a data bit.
- else :
- self.lnk_state = "WAIT FOR FALLING EDGE"
- elif self.lnk_state == 'WAIT FOR PRESENCE DETECT':
- # Sample presence status
- if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]):
- self.lnk_present = owr & 0x1
- # Save the sample number for the falling edge.
- if not (self.lnk_present) : self.lnk_fall = self.samplenum
- # create presence detect event
- #self.lnk_event = "PRESENCE DETECT"
- if (self.lnk_present) : self.lnk_state = 'WAIT FOR FALLING EDGE'
- else : self.lnk_state = 'WAIT FOR RISING EDGE'
- present_str = "False" if self.lnk_present else "True"
- self.put(self.samplenum, 0, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]])
- self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]])
- else:
- raise Exception('Invalid lnk_state: %d' % self.lnk_state)
-
- # Network layer
-
- # State machine.
- if (self.lnk_event == "RESET"):
- self.net_state = "COMMAND"
- self.net_search = "P"
- self.net_cnt = 0
- elif (self.net_state == "IDLE"):
- pass
- elif (self.net_state == "COMMAND"):
- # Receiving and decoding a ROM command
- if (self.onewire_collect(8)):
- self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK,
- ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]])
- if (self.net_data == 0x33): # READ ROM
- self.net_state = "GET ROM"
- elif (self.net_data == 0x0f): # CONDITIONAL READ ROM
- self.net_state = "GET ROM"
- elif (self.net_data == 0xcc): # SKIP ROM
- self.net_state = "TRANSPORT"
- elif (self.net_data == 0x55): # MATCH ROM
- self.net_state = "GET ROM"
- elif (self.net_data == 0xf0): # SEARCH ROM
- self.net_state = "SEARCH ROM"
- elif (self.net_data == 0xec): # CONDITIONAL SEARCH ROM
- self.net_state = "SEARCH ROM"
- elif (self.net_data == 0x3c): # OVERDRIVE SKIP ROM
- self.lnk_overdrive = 1
- self.net_state = "TRANSPORT"
- elif (self.net_data == 0x69): # OVERDRIVE MATCH ROM
- self.lnk_overdrive = 1
- self.net_state = "GET ROM"
- elif (self.net_state == "GET ROM"):
- # A 64 bit device address is selected
- # family code (1B) + serial number (6B) + CRC (1B)
- if (self.onewire_collect(64)):
- self.net_rom = self.net_data & 0xffffffffffffffff
- self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
- self.net_state = "TRANSPORT"
- elif (self.net_state == "SEARCH ROM"):
- # A 64 bit device address is searched for
- # family code (1B) + serial number (6B) + CRC (1B)
- if (self.onewire_search(64)):
- self.net_rom = self.net_data & 0xffffffffffffffff
- self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
- self.net_state = "TRANSPORT"
- elif (self.net_state == "TRANSPORT"):
- # The transport layer is handled in byte sized units
- if (self.onewire_collect(8)):
- self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]])
- self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]])
- self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data])
- # TODO: Sending translort layer data to 1-Wire device models
- else:
- raise Exception('Invalid net_state: %s' % self.net_state)
-
-
- # Link/Network layer data collector
- def onewire_collect (self, length):
- if (self.lnk_event == "DATA BIT"):
- # Storing the sampe this sequence begins with
- if (self.net_cnt == 1):
- self.net_beg = self.lnk_fall
- self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
- self.net_cnt = self.net_cnt + 1
- # Storing the sampe this sequence ends with
- # In case the full length of the sequence is received, return 1
- if (self.net_cnt == length):
- self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
- self.net_len = self.net_end - self.net_beg
- self.net_data = self.net_data & ((1<<length)-1)
- self.net_cnt = 0
- return (1)
- else:
- return (0)
- else:
- return (0)
-
- # Link/Network layer search collector
- def onewire_search (self, length):
- if (self.lnk_event == "DATA BIT"):
- # Storing the sampe this sequence begins with
- if ((self.net_cnt == 0) and (self.net_search == "P")):
- self.net_beg = self.lnk_fall
- # Master receives an original address bit
- if (self.net_search == "P"):
- self.net_data_p = self.net_data_p & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
- self.net_search = "N"
- # Master receives a complemented address bit
- elif (self.net_search == "N"):
- self.net_data_n = self.net_data_n & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
- self.net_search = "D"
- # Master transmits an address bit
- elif (self.net_search == "D"):
- self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
- self.net_search = "P"
- self.net_cnt = self.net_cnt + 1
- # Storing the sampe this sequence ends with
- # In case the full length of the sequence is received, return 1
- if (self.net_cnt == length):
- self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
- self.net_len = self.net_end - self.net_beg
- self.net_data_p = self.net_data_p & ((1<<length)-1)
- self.net_data_n = self.net_data_n & ((1<<length)-1)
- self.net_data = self.net_data & ((1<<length)-1)
- self.net_search = "P"
- self.net_cnt = 0
- return (1)
- else:
- return (0)
- else:
- return (0)
--- /dev/null
+##
+## This file is part of the sigrok project.
+##
+## Copyright (C) 2012 Iztok Jeras <iztok.jeras@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# 1-Wire protocol decoder
+
+import sigrokdecode as srd
+
+# Annotation feed formats
+ANN_LINK = 0
+ANN_NETWORK = 1
+ANN_TRANSPORT = 2
+
+# a dictionary of ROM commands and their names
+rom_command = {0x33: "READ ROM",
+ 0x0f: "CONDITIONAL READ ROM",
+ 0xcc: "SKIP ROM",
+ 0x55: "MATCH ROM",
+ 0xf0: "SEARCH ROM",
+ 0xec: "CONDITIONAL SEARCH ROM",
+ 0x3c: "OVERDRIVE SKIP ROM",
+ 0x6d: "OVERDRIVE MATCH ROM"}
+
+class Decoder(srd.Decoder):
+ api_version = 1
+ id = 'onewire'
+ name = '1-Wire'
+ longname = '1-Wire serial communication bus'
+ desc = 'Bidirectional, half-duplex, asynchronous serial bus.'
+ license = 'gplv2+'
+ inputs = ['logic']
+ outputs = ['onewire']
+ probes = [
+ {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire bus'},
+ ]
+ optional_probes = [
+ {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power'},
+ ]
+ options = {
+ 'overdrive' : ['Overdrive', 1],
+ 'cnt_normal_bit' : ['Time (in samplerate periods) for normal mode sample bit' , 0],
+ 'cnt_normal_presence' : ['Time (in samplerate periods) for normal mode sample presence', 0],
+ 'cnt_normal_reset' : ['Time (in samplerate periods) for normal mode reset' , 0],
+ 'cnt_overdrive_bit' : ['Time (in samplerate periods) for overdrive mode sample bit' , 0],
+ 'cnt_overdrive_presence': ['Time (in samplerate periods) for overdrive mode sample presence', 0],
+ 'cnt_overdrive_reset' : ['Time (in samplerate periods) for overdrive mode reset' , 0],
+ }
+ annotations = [
+ ['Link', 'Link layer events (reset, presence, bit slots)'],
+ ['Network', 'Network layer events (device addressing)'],
+ ['Transport', 'Transport layer events'],
+ ]
+
+ def __init__(self, **kwargs):
+ # Common variables
+ self.samplenum = 0
+ # Link layer variables
+ self.lnk_state = 'WAIT FOR FALLING EDGE'
+ self.lnk_event = 'NONE'
+ self.lnk_present = 0
+ self.lnk_bit = 0
+ self.lnk_overdrive = 0
+ # Event timing variables
+ self.lnk_fall = 0
+ self.lnk_rise = 0
+ self.net_beg = 0
+ self.net_end = 0
+ self.net_len = 0
+ # Network layer variables
+ self.net_state = 'IDLE'
+ self.net_cnt = 0
+ self.net_search = "P"
+ self.net_data_p = 0x0
+ self.net_data_n = 0x0
+ self.net_data = 0x0
+ self.net_rom = 0x0000000000000000
+
+ def start(self, metadata):
+ self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire')
+ self.out_ann = self.add(srd.OUTPUT_ANN , 'onewire')
+
+ # check if samplerate is appropriate
+ self.samplerate = metadata['samplerate']
+ if (self.options['overdrive']):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['NOTE: Sample rate checks assume overdrive mode.']])
+ if (self.samplerate < 2000000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']])
+ elif (self.samplerate < 5000000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']])
+ else:
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['NOTE: Sample rate checks assume normal mode only.']])
+ if (self.samplerate < 400000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']])
+ elif (self.samplerate < 1000000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']])
+
+ # The default 1-Wire time base is 30us, this is used to calculate sampling times.
+ if (self.options['cnt_normal_bit']):
+ self.cnt_normal_bit = self.options['cnt_normal_bit']
+ else:
+ self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns
+ if (self.options['cnt_normal_presence']):
+ self.cnt_normal_presence = self.options['cnt_normal_presence']
+ else:
+ self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns
+ if (self.options['cnt_normal_reset']):
+ self.cnt_normal_reset = self.options['cnt_normal_reset']
+ else:
+ self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns
+ if (self.options['cnt_overdrive_bit']):
+ self.cnt_overdrive_bit = self.options['cnt_overdrive_bit']
+ else:
+ self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns
+ if (self.options['cnt_overdrive_presence']):
+ self.cnt_overdrive_presence = self.options['cnt_overdrive_presence']
+ else:
+ self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns
+ if (self.options['cnt_overdrive_reset']):
+ self.cnt_overdrive_reset = self.options['cnt_overdrive_reset']
+ else:
+ self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns
+
+ # calculating the slot size
+ self.cnt_normal_slot = int(float(self.samplerate) * 0.000060) - 1 # 60ns
+ self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 # 6ns
+
+ # organize values into lists
+ self.cnt_bit = [self.cnt_normal_bit , self.cnt_overdrive_bit ]
+ self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence]
+ self.cnt_reset = [self.cnt_normal_reset , self.cnt_overdrive_reset ]
+ self.cnt_slot = [self.cnt_normal_slot , self.cnt_overdrive_slot ]
+
+ # Check if sample times are in the allowed range
+ time_min = float(self.cnt_normal_bit ) / self.samplerate
+ time_max = float(self.cnt_normal_bit+1) / self.samplerate
+ if ( (time_min < 0.000005) or (time_max > 0.000015) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+ time_min = float(self.cnt_normal_presence ) / self.samplerate
+ time_max = float(self.cnt_normal_presence+1) / self.samplerate
+ if ( (time_min < 0.0000681) or (time_max > 0.000075) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+ time_min = float(self.cnt_overdrive_bit ) / self.samplerate
+ time_max = float(self.cnt_overdrive_bit+1) / self.samplerate
+ if ( (time_min < 0.000001) or (time_max > 0.000002) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+ time_min = float(self.cnt_overdrive_presence ) / self.samplerate
+ time_max = float(self.cnt_overdrive_presence+1) / self.samplerate
+ if ( (time_min < 0.0000073) or (time_max > 0.000010) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+
+ def report(self):
+ pass
+
+ def decode(self, ss, es, data):
+ for (self.samplenum, (owr, pwr)) in data:
+
+ # Data link layer
+
+ # Clear events.
+ self.lnk_event = "NONE"
+ # State machine.
+ if self.lnk_state == 'WAIT FOR FALLING EDGE':
+ # The start of a cycle is a falling edge.
+ if (owr == 0):
+ # Save the sample number for the falling edge.
+ self.lnk_fall = self.samplenum
+ # Go to waiting for sample time
+ self.lnk_state = 'WAIT FOR DATA SAMPLE'
+ elif self.lnk_state == 'WAIT FOR DATA SAMPLE':
+ # Sample data bit
+ if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]):
+ self.lnk_bit = owr & 0x1
+ self.lnk_event = "DATA BIT"
+ if (self.lnk_bit): self.lnk_state = 'WAIT FOR FALLING EDGE'
+ else : self.lnk_state = 'WAIT FOR RISING EDGE'
+ self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]])
+ elif self.lnk_state == 'WAIT FOR RISING EDGE':
+ # The end of a cycle is a rising edge.
+ if (owr == 1):
+ # Check if this was a reset cycle
+ if (self.samplenum - self.lnk_fall > self.cnt_normal_reset):
+ # Save the sample number for the falling edge.
+ self.lnk_rise = self.samplenum
+ # Send a reset event to the next protocol layer.
+ self.lnk_event = "RESET"
+ self.lnk_state = "WAIT FOR PRESENCE DETECT"
+ self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET'])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET']])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET']])
+ # Reset the timer.
+ self.lnk_fall = self.samplenum
+ elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)):
+ # Save the sample number for the falling edge.
+ self.lnk_rise = self.samplenum
+ # Send a reset event to the next protocol layer.
+ self.lnk_event = "RESET"
+ self.lnk_state = "WAIT FOR PRESENCE DETECT"
+ self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE'])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']])
+ # Reset the timer.
+ self.lnk_fall = self.samplenum
+ # Otherwise this is assumed to be a data bit.
+ else :
+ self.lnk_state = "WAIT FOR FALLING EDGE"
+ elif self.lnk_state == 'WAIT FOR PRESENCE DETECT':
+ # Sample presence status
+ if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]):
+ self.lnk_present = owr & 0x1
+ # Save the sample number for the falling edge.
+ if not (self.lnk_present) : self.lnk_fall = self.samplenum
+ # create presence detect event
+ #self.lnk_event = "PRESENCE DETECT"
+ if (self.lnk_present) : self.lnk_state = 'WAIT FOR FALLING EDGE'
+ else : self.lnk_state = 'WAIT FOR RISING EDGE'
+ present_str = "False" if self.lnk_present else "True"
+ self.put(self.samplenum, 0, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]])
+ self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]])
+ else:
+ raise Exception('Invalid lnk_state: %d' % self.lnk_state)
+
+ # Network layer
+
+ # State machine.
+ if (self.lnk_event == "RESET"):
+ self.net_state = "COMMAND"
+ self.net_search = "P"
+ self.net_cnt = 0
+ elif (self.net_state == "IDLE"):
+ pass
+ elif (self.net_state == "COMMAND"):
+ # Receiving and decoding a ROM command
+ if (self.onewire_collect(8)):
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK,
+ ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]])
+ if (self.net_data == 0x33): # READ ROM
+ self.net_state = "GET ROM"
+ elif (self.net_data == 0x0f): # CONDITIONAL READ ROM
+ self.net_state = "GET ROM"
+ elif (self.net_data == 0xcc): # SKIP ROM
+ self.net_state = "TRANSPORT"
+ elif (self.net_data == 0x55): # MATCH ROM
+ self.net_state = "GET ROM"
+ elif (self.net_data == 0xf0): # SEARCH ROM
+ self.net_state = "SEARCH ROM"
+ elif (self.net_data == 0xec): # CONDITIONAL SEARCH ROM
+ self.net_state = "SEARCH ROM"
+ elif (self.net_data == 0x3c): # OVERDRIVE SKIP ROM
+ self.lnk_overdrive = 1
+ self.net_state = "TRANSPORT"
+ elif (self.net_data == 0x69): # OVERDRIVE MATCH ROM
+ self.lnk_overdrive = 1
+ self.net_state = "GET ROM"
+ elif (self.net_state == "GET ROM"):
+ # A 64 bit device address is selected
+ # family code (1B) + serial number (6B) + CRC (1B)
+ if (self.onewire_collect(64)):
+ self.net_rom = self.net_data & 0xffffffffffffffff
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
+ self.net_state = "TRANSPORT"
+ elif (self.net_state == "SEARCH ROM"):
+ # A 64 bit device address is searched for
+ # family code (1B) + serial number (6B) + CRC (1B)
+ if (self.onewire_search(64)):
+ self.net_rom = self.net_data & 0xffffffffffffffff
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
+ self.net_state = "TRANSPORT"
+ elif (self.net_state == "TRANSPORT"):
+ # The transport layer is handled in byte sized units
+ if (self.onewire_collect(8)):
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]])
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]])
+ self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data])
+ # TODO: Sending translort layer data to 1-Wire device models
+ else:
+ raise Exception('Invalid net_state: %s' % self.net_state)
+
+
+ # Link/Network layer data collector
+ def onewire_collect (self, length):
+ if (self.lnk_event == "DATA BIT"):
+ # Storing the sampe this sequence begins with
+ if (self.net_cnt == 1):
+ self.net_beg = self.lnk_fall
+ self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_cnt = self.net_cnt + 1
+ # Storing the sampe this sequence ends with
+ # In case the full length of the sequence is received, return 1
+ if (self.net_cnt == length):
+ self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
+ self.net_len = self.net_end - self.net_beg
+ self.net_data = self.net_data & ((1<<length)-1)
+ self.net_cnt = 0
+ return (1)
+ else:
+ return (0)
+ else:
+ return (0)
+
+ # Link/Network layer search collector
+ def onewire_search (self, length):
+ if (self.lnk_event == "DATA BIT"):
+ # Storing the sampe this sequence begins with
+ if ((self.net_cnt == 0) and (self.net_search == "P")):
+ self.net_beg = self.lnk_fall
+ # Master receives an original address bit
+ if (self.net_search == "P"):
+ self.net_data_p = self.net_data_p & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_search = "N"
+ # Master receives a complemented address bit
+ elif (self.net_search == "N"):
+ self.net_data_n = self.net_data_n & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_search = "D"
+ # Master transmits an address bit
+ elif (self.net_search == "D"):
+ self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_search = "P"
+ self.net_cnt = self.net_cnt + 1
+ # Storing the sampe this sequence ends with
+ # In case the full length of the sequence is received, return 1
+ if (self.net_cnt == length):
+ self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
+ self.net_len = self.net_end - self.net_beg
+ self.net_data_p = self.net_data_p & ((1<<length)-1)
+ self.net_data_n = self.net_data_n & ((1<<length)-1)
+ self.net_data = self.net_data & ((1<<length)-1)
+ self.net_search = "P"
+ self.net_cnt = 0
+ return (1)
+ else:
+ return (0)
+ else:
+ return (0)
--- /dev/null
+##
+## This file is part of the sigrok project.
+##
+## Copyright (C) 2012 Iztok Jeras <iztok.jeras@gmail.com>
+##
+## This program is free software; you can redistribute it and/or modify
+## it under the terms of the GNU General Public License as published by
+## the Free Software Foundation; either version 2 of the License, or
+## (at your option) any later version.
+##
+## This program is distributed in the hope that it will be useful,
+## but WITHOUT ANY WARRANTY; without even the implied warranty of
+## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+## GNU General Public License for more details.
+##
+## You should have received a copy of the GNU General Public License
+## along with this program; if not, write to the Free Software
+## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+##
+
+# 1-Wire protocol decoder
+
+import sigrokdecode as srd
+
+# Annotation feed formats
+ANN_LINK = 0
+ANN_NETWORK = 1
+ANN_TRANSPORT = 2
+
+# a dictionary of ROM commands and their names
+rom_command = {0x33: "READ ROM",
+ 0x0f: "CONDITIONAL READ ROM",
+ 0xcc: "SKIP ROM",
+ 0x55: "MATCH ROM",
+ 0xf0: "SEARCH ROM",
+ 0xec: "CONDITIONAL SEARCH ROM",
+ 0x3c: "OVERDRIVE SKIP ROM",
+ 0x6d: "OVERDRIVE MATCH ROM"}
+
+class Decoder(srd.Decoder):
+ api_version = 1
+ id = 'onewire'
+ name = '1-Wire'
+ longname = '1-Wire serial communication bus'
+ desc = 'Bidirectional, half-duplex, asynchronous serial bus.'
+ license = 'gplv2+'
+ inputs = ['logic']
+ outputs = ['onewire']
+ probes = [
+ {'id': 'owr', 'name': 'OWR', 'desc': '1-Wire bus'},
+ ]
+ optional_probes = [
+ {'id': 'pwr', 'name': 'PWR', 'desc': '1-Wire power'},
+ ]
+ options = {
+ 'overdrive' : ['Overdrive', 1],
+ 'cnt_normal_bit' : ['Time (in samplerate periods) for normal mode sample bit' , 0],
+ 'cnt_normal_presence' : ['Time (in samplerate periods) for normal mode sample presence', 0],
+ 'cnt_normal_reset' : ['Time (in samplerate periods) for normal mode reset' , 0],
+ 'cnt_overdrive_bit' : ['Time (in samplerate periods) for overdrive mode sample bit' , 0],
+ 'cnt_overdrive_presence': ['Time (in samplerate periods) for overdrive mode sample presence', 0],
+ 'cnt_overdrive_reset' : ['Time (in samplerate periods) for overdrive mode reset' , 0],
+ }
+ annotations = [
+ ['Link', 'Link layer events (reset, presence, bit slots)'],
+ ['Network', 'Network layer events (device addressing)'],
+ ['Transport', 'Transport layer events'],
+ ]
+
+ def __init__(self, **kwargs):
+ # Common variables
+ self.samplenum = 0
+ # Link layer variables
+ self.lnk_state = 'WAIT FOR FALLING EDGE'
+ self.lnk_event = 'NONE'
+ self.lnk_present = 0
+ self.lnk_bit = 0
+ self.lnk_overdrive = 0
+ # Event timing variables
+ self.lnk_fall = 0
+ self.lnk_rise = 0
+ self.net_beg = 0
+ self.net_end = 0
+ self.net_len = 0
+ # Network layer variables
+ self.net_state = 'IDLE'
+ self.net_cnt = 0
+ self.net_search = "P"
+ self.net_data_p = 0x0
+ self.net_data_n = 0x0
+ self.net_data = 0x0
+ self.net_rom = 0x0000000000000000
+
+ def start(self, metadata):
+ self.out_proto = self.add(srd.OUTPUT_PROTO, 'onewire')
+ self.out_ann = self.add(srd.OUTPUT_ANN , 'onewire')
+
+ # check if samplerate is appropriate
+ self.samplerate = metadata['samplerate']
+ if (self.options['overdrive']):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['NOTE: Sample rate checks assume overdrive mode.']])
+ if (self.samplerate < 2000000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['ERROR: Sampling rate is too low must be above 2MHz for proper overdrive mode decoding.']])
+ elif (self.samplerate < 5000000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: Sampling rate is suggested to be above 5MHz for proper overdrive mode decoding.']])
+ else:
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['NOTE: Sample rate checks assume normal mode only.']])
+ if (self.samplerate < 400000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['ERROR: Sampling rate is too low must be above 400kHz for proper normal mode decoding.']])
+ elif (self.samplerate < 1000000):
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: Sampling rate is suggested to be above 1MHz for proper normal mode decoding.']])
+
+ # The default 1-Wire time base is 30us, this is used to calculate sampling times.
+ if (self.options['cnt_normal_bit']):
+ self.cnt_normal_bit = self.options['cnt_normal_bit']
+ else:
+ self.cnt_normal_bit = int(float(self.samplerate) * 0.000015) - 1 # 15ns
+ if (self.options['cnt_normal_presence']):
+ self.cnt_normal_presence = self.options['cnt_normal_presence']
+ else:
+ self.cnt_normal_presence = int(float(self.samplerate) * 0.000075) - 1 # 75ns
+ if (self.options['cnt_normal_reset']):
+ self.cnt_normal_reset = self.options['cnt_normal_reset']
+ else:
+ self.cnt_normal_reset = int(float(self.samplerate) * 0.000480) - 1 # 480ns
+ if (self.options['cnt_overdrive_bit']):
+ self.cnt_overdrive_bit = self.options['cnt_overdrive_bit']
+ else:
+ self.cnt_overdrive_bit = int(float(self.samplerate) * 0.000002) - 1 # 2ns
+ if (self.options['cnt_overdrive_presence']):
+ self.cnt_overdrive_presence = self.options['cnt_overdrive_presence']
+ else:
+ self.cnt_overdrive_presence = int(float(self.samplerate) * 0.000010) - 1 # 10ns
+ if (self.options['cnt_overdrive_reset']):
+ self.cnt_overdrive_reset = self.options['cnt_overdrive_reset']
+ else:
+ self.cnt_overdrive_reset = int(float(self.samplerate) * 0.000048) - 1 # 48ns
+
+ # calculating the slot size
+ self.cnt_normal_slot = int(float(self.samplerate) * 0.000060) - 1 # 60ns
+ self.cnt_overdrive_slot = int(float(self.samplerate) * 0.000006) - 1 # 6ns
+
+ # organize values into lists
+ self.cnt_bit = [self.cnt_normal_bit , self.cnt_overdrive_bit ]
+ self.cnt_presence = [self.cnt_normal_presence, self.cnt_overdrive_presence]
+ self.cnt_reset = [self.cnt_normal_reset , self.cnt_overdrive_reset ]
+ self.cnt_slot = [self.cnt_normal_slot , self.cnt_overdrive_slot ]
+
+ # Check if sample times are in the allowed range
+ time_min = float(self.cnt_normal_bit ) / self.samplerate
+ time_max = float(self.cnt_normal_bit+1) / self.samplerate
+ if ( (time_min < 0.000005) or (time_max > 0.000015) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The normal mode data sample time interval (%2.1fus-%2.1fus) should be inside (5.0us, 15.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+ time_min = float(self.cnt_normal_presence ) / self.samplerate
+ time_max = float(self.cnt_normal_presence+1) / self.samplerate
+ if ( (time_min < 0.0000681) or (time_max > 0.000075) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The normal mode presence sample time interval (%2.1fus-%2.1fus) should be inside (68.1us, 75.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+ time_min = float(self.cnt_overdrive_bit ) / self.samplerate
+ time_max = float(self.cnt_overdrive_bit+1) / self.samplerate
+ if ( (time_min < 0.000001) or (time_max > 0.000002) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The overdrive mode data sample time interval (%2.1fus-%2.1fus) should be inside (1.0us, 2.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+ time_min = float(self.cnt_overdrive_presence ) / self.samplerate
+ time_max = float(self.cnt_overdrive_presence+1) / self.samplerate
+ if ( (time_min < 0.0000073) or (time_max > 0.000010) ) :
+ self.put(0, 0, self.out_ann, [ANN_LINK,
+ ['WARNING: The overdrive mode presence sample time interval (%2.1fus-%2.1fus) should be inside (7.3us, 10.0us).'
+ % (time_min*1000000, time_max*1000000)]])
+
+ def report(self):
+ pass
+
+ def decode(self, ss, es, data):
+ for (self.samplenum, (owr, pwr)) in data:
+
+ # Data link layer
+
+ # Clear events.
+ self.lnk_event = "NONE"
+ # State machine.
+ if self.lnk_state == 'WAIT FOR FALLING EDGE':
+ # The start of a cycle is a falling edge.
+ if (owr == 0):
+ # Save the sample number for the falling edge.
+ self.lnk_fall = self.samplenum
+ # Go to waiting for sample time
+ self.lnk_state = 'WAIT FOR DATA SAMPLE'
+ elif self.lnk_state == 'WAIT FOR DATA SAMPLE':
+ # Sample data bit
+ if (self.samplenum - self.lnk_fall == self.cnt_bit[self.lnk_overdrive]):
+ self.lnk_bit = owr & 0x1
+ self.lnk_event = "DATA BIT"
+ if (self.lnk_bit): self.lnk_state = 'WAIT FOR FALLING EDGE'
+ else : self.lnk_state = 'WAIT FOR RISING EDGE'
+ self.put(self.lnk_fall, self.cnt_bit[self.lnk_overdrive], self.out_ann, [ANN_LINK, ['BIT: %01x' % self.lnk_bit]])
+ elif self.lnk_state == 'WAIT FOR RISING EDGE':
+ # The end of a cycle is a rising edge.
+ if (owr == 1):
+ # Check if this was a reset cycle
+ if (self.samplenum - self.lnk_fall > self.cnt_normal_reset):
+ # Save the sample number for the falling edge.
+ self.lnk_rise = self.samplenum
+ # Send a reset event to the next protocol layer.
+ self.lnk_event = "RESET"
+ self.lnk_state = "WAIT FOR PRESENCE DETECT"
+ self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET'])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET']])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET']])
+ # Reset the timer.
+ self.lnk_fall = self.samplenum
+ elif ((self.samplenum - self.lnk_fall > self.cnt_overdrive_reset) and (self.lnk_overdrive)):
+ # Save the sample number for the falling edge.
+ self.lnk_rise = self.samplenum
+ # Send a reset event to the next protocol layer.
+ self.lnk_event = "RESET"
+ self.lnk_state = "WAIT FOR PRESENCE DETECT"
+ self.put(self.lnk_fall, self.lnk_rise, self.out_proto, ['RESET OVERDRIVE'])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_LINK , ['RESET OVERDRIVE']])
+ self.put(self.lnk_fall, self.lnk_rise, self.out_ann, [ANN_NETWORK , ['RESET OVERDRIVE']])
+ # Reset the timer.
+ self.lnk_fall = self.samplenum
+ # Otherwise this is assumed to be a data bit.
+ else :
+ self.lnk_state = "WAIT FOR FALLING EDGE"
+ elif self.lnk_state == 'WAIT FOR PRESENCE DETECT':
+ # Sample presence status
+ if (self.samplenum - self.lnk_rise == self.cnt_presence[self.lnk_overdrive]):
+ self.lnk_present = owr & 0x1
+ # Save the sample number for the falling edge.
+ if not (self.lnk_present) : self.lnk_fall = self.samplenum
+ # create presence detect event
+ #self.lnk_event = "PRESENCE DETECT"
+ if (self.lnk_present) : self.lnk_state = 'WAIT FOR FALLING EDGE'
+ else : self.lnk_state = 'WAIT FOR RISING EDGE'
+ present_str = "False" if self.lnk_present else "True"
+ self.put(self.samplenum, 0, self.out_ann, [ANN_LINK , ['PRESENCE: ' + present_str]])
+ self.put(self.samplenum, 0, self.out_ann, [ANN_NETWORK, ['PRESENCE: ' + present_str]])
+ else:
+ raise Exception('Invalid lnk_state: %d' % self.lnk_state)
+
+ # Network layer
+
+ # State machine.
+ if (self.lnk_event == "RESET"):
+ self.net_state = "COMMAND"
+ self.net_search = "P"
+ self.net_cnt = 0
+ elif (self.net_state == "IDLE"):
+ pass
+ elif (self.net_state == "COMMAND"):
+ # Receiving and decoding a ROM command
+ if (self.onewire_collect(8)):
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK,
+ ['ROM COMMAND: 0x%02x \'%s\'' % (self.net_data, rom_command[self.net_data])]])
+ if (self.net_data == 0x33): # READ ROM
+ self.net_state = "GET ROM"
+ elif (self.net_data == 0x0f): # CONDITIONAL READ ROM
+ self.net_state = "GET ROM"
+ elif (self.net_data == 0xcc): # SKIP ROM
+ self.net_state = "TRANSPORT"
+ elif (self.net_data == 0x55): # MATCH ROM
+ self.net_state = "GET ROM"
+ elif (self.net_data == 0xf0): # SEARCH ROM
+ self.net_state = "SEARCH ROM"
+ elif (self.net_data == 0xec): # CONDITIONAL SEARCH ROM
+ self.net_state = "SEARCH ROM"
+ elif (self.net_data == 0x3c): # OVERDRIVE SKIP ROM
+ self.lnk_overdrive = 1
+ self.net_state = "TRANSPORT"
+ elif (self.net_data == 0x69): # OVERDRIVE MATCH ROM
+ self.lnk_overdrive = 1
+ self.net_state = "GET ROM"
+ elif (self.net_state == "GET ROM"):
+ # A 64 bit device address is selected
+ # family code (1B) + serial number (6B) + CRC (1B)
+ if (self.onewire_collect(64)):
+ self.net_rom = self.net_data & 0xffffffffffffffff
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
+ self.net_state = "TRANSPORT"
+ elif (self.net_state == "SEARCH ROM"):
+ # A 64 bit device address is searched for
+ # family code (1B) + serial number (6B) + CRC (1B)
+ if (self.onewire_search(64)):
+ self.net_rom = self.net_data & 0xffffffffffffffff
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK, ['ROM: 0x%016x' % self.net_rom]])
+ self.net_state = "TRANSPORT"
+ elif (self.net_state == "TRANSPORT"):
+ # The transport layer is handled in byte sized units
+ if (self.onewire_collect(8)):
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_NETWORK , ['TRANSPORT: 0x%02x' % self.net_data]])
+ self.put(self.net_beg, self.net_len, self.out_ann, [ANN_TRANSPORT, ['TRANSPORT: 0x%02x' % self.net_data]])
+ self.put(self.net_beg, self.net_len, self.out_proto, ['transfer', self.net_data])
+ # TODO: Sending translort layer data to 1-Wire device models
+ else:
+ raise Exception('Invalid net_state: %s' % self.net_state)
+
+
+ # Link/Network layer data collector
+ def onewire_collect (self, length):
+ if (self.lnk_event == "DATA BIT"):
+ # Storing the sampe this sequence begins with
+ if (self.net_cnt == 1):
+ self.net_beg = self.lnk_fall
+ self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_cnt = self.net_cnt + 1
+ # Storing the sampe this sequence ends with
+ # In case the full length of the sequence is received, return 1
+ if (self.net_cnt == length):
+ self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
+ self.net_len = self.net_end - self.net_beg
+ self.net_data = self.net_data & ((1<<length)-1)
+ self.net_cnt = 0
+ return (1)
+ else:
+ return (0)
+ else:
+ return (0)
+
+ # Link/Network layer search collector
+ def onewire_search (self, length):
+ if (self.lnk_event == "DATA BIT"):
+ # Storing the sampe this sequence begins with
+ if ((self.net_cnt == 0) and (self.net_search == "P")):
+ self.net_beg = self.lnk_fall
+ # Master receives an original address bit
+ if (self.net_search == "P"):
+ self.net_data_p = self.net_data_p & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_search = "N"
+ # Master receives a complemented address bit
+ elif (self.net_search == "N"):
+ self.net_data_n = self.net_data_n & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_search = "D"
+ # Master transmits an address bit
+ elif (self.net_search == "D"):
+ self.net_data = self.net_data & ~(1 << self.net_cnt) | (self.lnk_bit << self.net_cnt)
+ self.net_search = "P"
+ self.net_cnt = self.net_cnt + 1
+ # Storing the sampe this sequence ends with
+ # In case the full length of the sequence is received, return 1
+ if (self.net_cnt == length):
+ self.net_end = self.lnk_fall + self.cnt_slot[self.lnk_overdrive]
+ self.net_len = self.net_end - self.net_beg
+ self.net_data_p = self.net_data_p & ((1<<length)-1)
+ self.net_data_n = self.net_data_n & ((1<<length)-1)
+ self.net_data = self.net_data & ((1<<length)-1)
+ self.net_search = "P"
+ self.net_cnt = 0
+ return (1)
+ else:
+ return (0)
+ else:
+ return (0)
projects / libsigrokdecode.git / commitdiff