* ARMFLY AX-Pro
*/
{ 0x08a9, 0x0014, "CWAV", "USBee AX", NULL,
- FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw", 8 },
+ FIRMWARE_DIR "/fx2lafw-cwav-usbeeax.fw",
+ 0 },
/*
* CWAV USBee SX
*/
{ 0x08a9, 0x0009, "CWAV", "USBee SX", NULL,
- FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw", 8 },
+ FIRMWARE_DIR "/fx2lafw-cwav-usbeesx.fw",
+ 0 },
/*
* Saleae Logic
* Robomotic BugLogic 3
*/
{ 0x0925, 0x3881, "Saleae", "Logic", NULL,
- FIRMWARE_DIR "/fx2lafw-saleae-logic.fw", 8 },
+ FIRMWARE_DIR "/fx2lafw-saleae-logic.fw",
+ 0 },
/*
* Default Cypress FX2 without EEPROM, e.g.:
* Braintechnology USB Interface V2.x
*/
{ 0x04B4, 0x8613, "Cypress", "FX2", NULL,
- FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw", 8 },
+ FIRMWARE_DIR "/fx2lafw-cypress-fx2.fw",
+ DEV_CAPS_16BIT },
/*
* Braintechnology USB-LPS
*/
{ 0x16d0, 0x0498, "Braintechnology", "USB-LPS", NULL,
- FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw", 8 },
+ FIRMWARE_DIR "/fx2lafw-braintechnology-usb-lps.fw",
+ DEV_CAPS_16BIT },
{ 0, 0, 0, 0, 0, 0, 0 }
};
"5",
"6",
"7",
+ "8",
+ "9",
+ "10",
+ "11",
+ "12",
+ "13",
+ "14",
+ "15",
NULL,
};
probe = (struct sr_probe *)l->data;
if (probe->enabled == FALSE)
continue;
+
+ if (probe->index > 8)
+ ctx->sample_wide = true;
+
probe_bit = 1 << (probe->index - 1);
if (!(probe->trigger))
continue;
case SR_DI_INST:
return sdi;
case SR_DI_NUM_PROBES:
- return GINT_TO_POINTER(ctx->profile->num_probes);
+ return GINT_TO_POINTER(
+ (ctx->profile->dev_caps & DEV_CAPS_16BIT) ?
+ 16 : 8);
case SR_DI_PROBE_NAMES:
return probe_names;
case SR_DI_SAMPLERATES:
struct sr_datafeed_packet packet;
struct sr_datafeed_logic logic;
struct context *ctx = transfer->user_data;
- int cur_buflen, trigger_offset, i;
- unsigned char *cur_buf, *new_buf;
+ int trigger_offset, i;
+ uint8_t *new_buf;
/*
* If acquisition has already ended, just free any queued up
transfer->status, transfer->actual_length);
/* Save incoming transfer before reusing the transfer struct. */
- cur_buf = transfer->buffer;
- cur_buflen = transfer->actual_length;
+ uint8_t *const cur_buf = transfer->buffer;
+ const int sample_width = ctx->sample_wide ? 2 : 1;
+ const int cur_sample_count = transfer->actual_length / sample_width;
/* Fire off a new request. */
if (!(new_buf = g_try_malloc(4096))) {
sr_err("fx2lafw: %s: libusb_submit_transfer error.", __func__);
}
- if (cur_buflen == 0) {
+ if (transfer->actual_length == 0) {
empty_transfer_count++;
if (empty_transfer_count > MAX_EMPTY_TRANSFERS) {
/*
trigger_offset = 0;
if (ctx->trigger_stage >= 0) {
- for (i = 0; i < cur_buflen; i++) {
+ for (i = 0; i < cur_sample_count; i++) {
+
+ const uint16_t cur_sample = ctx->sample_wide ?
+ *((const uint16_t*)cur_buf + i) :
+ *((const uint8_t*)cur_buf + i);
- if ((cur_buf[i] & ctx->trigger_mask[ctx->trigger_stage]) == ctx->trigger_value[ctx->trigger_stage]) {
+ if ((cur_sample & ctx->trigger_mask[ctx->trigger_stage]) ==
+ ctx->trigger_value[ctx->trigger_stage]) {
/* Match on this trigger stage. */
- ctx->trigger_buffer[ctx->trigger_stage] = cur_buf[i];
+ ctx->trigger_buffer[ctx->trigger_stage] = cur_sample;
ctx->trigger_stage++;
- if (ctx->trigger_stage == NUM_TRIGGER_STAGES || ctx->trigger_mask[ctx->trigger_stage] == 0) {
+ if (ctx->trigger_stage == NUM_TRIGGER_STAGES ||
+ ctx->trigger_mask[ctx->trigger_stage] == 0) {
/* Match on all trigger stages, we're done. */
trigger_offset = i + 1;
if (ctx->trigger_stage == TRIGGER_FIRED) {
/* Send the incoming transfer to the session bus. */
+ const trigger_offset_bytes = trigger_offset * sample_width;
packet.type = SR_DF_LOGIC;
packet.payload = &logic;
- logic.length = cur_buflen - trigger_offset;
- logic.unitsize = 1;
- logic.data = cur_buf + trigger_offset;
+ logic.length = transfer->actual_length - trigger_offset_bytes;
+ logic.unitsize = sample_width;
+ logic.data = cur_buf + trigger_offset_bytes;
sr_session_send(ctx->session_dev_id, &packet);
g_free(cur_buf);
- ctx->num_samples += cur_buflen;
+ ctx->num_samples += cur_sample_count;
if (ctx->limit_samples &&
(unsigned int)ctx->num_samples > ctx->limit_samples) {
abort_acquisition(ctx);
packet->type = SR_DF_META_LOGIC;
packet->payload = &meta;
meta.samplerate = ctx->cur_samplerate;
- meta.num_probes = ctx->profile->num_probes;
+ meta.num_probes = ctx->sample_wide ? 16 : 8;
sr_session_send(cb_data, packet);
g_free(header);
g_free(packet);
if ((ret = command_start_acquisition (ctx->usb->devhdl,
- ctx->cur_samplerate)) != SR_OK) {
+ ctx->cur_samplerate, ctx->sample_wide)) != SR_OK) {
return ret;
}