All PDs: Only import the 'Decoder' object.

Anything else in the pd.py files doesn't have to be imported/exposed.

diff --git a/decoders/am230x/__init__.py b/decoders/am230x/__init__.py
index 73782e1dffce818b8f4ed54359a0ad186fb7b2ee..98f20b6528cd95a8c52771c16a8d681ce00fb8b3 100644 (file)
--- a/decoders/am230x/__init__.py
+++ b/decoders/am230x/__init__.py
@@ -33,4 +33,4 @@ Therefore the option 'device' must be used to properly decode the
 communication of the respective sensor.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/avr_isp/__init__.py b/decoders/avr_isp/__init__.py
index 87a6e7cb691a540aae1cfd726d82f1b1d5179c34..75a9fe2977b25aff43c674b283a13a82e6c4f419 100644 (file)
--- a/decoders/avr_isp/__init__.py
+++ b/decoders/avr_isp/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'spi' PD and decodes the In-System
 Programming (ISP) protocol of some Atmel AVR 8-bit microcontrollers.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/can/__init__.py b/decoders/can/__init__.py
index 9f9fcde857c924a4425ce0e9d1e0c1d09ef454cb..60dc85f884b27a8e92f7df965687f848076b6e33 100644 (file)
--- a/decoders/can/__init__.py
+++ b/decoders/can/__init__.py
@@ -27,4 +27,4 @@ the digital output side of a CAN transceiver IC such as the Microchip
 MCP-2515DM-BM).
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/dcf77/__init__.py b/decoders/dcf77/__init__.py
index 1a294620e343d5fecc1f91a1fb9b5f3db4356ed4..8423028c3100785a6d183e53c2ff17f26336341c 100644 (file)
--- a/decoders/dcf77/__init__.py
+++ b/decoders/dcf77/__init__.py
@@ -26,4 +26,4 @@ Details:
 http://en.wikipedia.org/wiki/DCF77
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/ds1307/__init__.py b/decoders/ds1307/__init__.py
index 70980a6217d02de2e743085d36878343b018ebcb..71662298eefbef4e7353dd9ead1a98b8fb6a158d 100644 (file)
--- a/decoders/ds1307/__init__.py
+++ b/decoders/ds1307/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'i2c' PD and decodes the Dallas DS1307
 real-time clock (RTC) specific registers and commands.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/edid/__init__.py b/decoders/edid/__init__.py
index 318130f23b7c9866085c9dec15d9aae8948d169b..de544d3c716eb8c48dacb9f080029dba07032a80 100644 (file)
--- a/decoders/edid/__init__.py
+++ b/decoders/edid/__init__.py
@@ -36,4 +36,4 @@ More information on EDID is available here:
  https://en.wikipedia.org/wiki/Extended_display_identification_data
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/guess_bitrate/__init__.py b/decoders/guess_bitrate/__init__.py
index 1b41f72d7ae8fb7368c3fc6d4031acc5b8160700..cd8f15e724f5a67bb0099bf41864160d79ad8139 100644 (file)
--- a/decoders/guess_bitrate/__init__.py
+++ b/decoders/guess_bitrate/__init__.py
@@ -34,4 +34,4 @@ recommended to use a logic analyzer samplerate that is much higher than
 the expected bitrate/baudrate that might be used on the channel.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/i2c/__init__.py b/decoders/i2c/__init__.py
index eaebbdb8b3cb7a6c46d44ef3ed5a9315102a7408..c3b0cd5095ea9b991171f85cc343f9d5df83019a 100644 (file)
--- a/decoders/i2c/__init__.py
+++ b/decoders/i2c/__init__.py
@@ -23,4 +23,4 @@ I²C (Inter-Integrated Circuit) is a bidirectional, multi-master
 bus using two signals (SCL = serial clock line, SDA = serial data line).
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/i2cdemux/__init__.py b/decoders/i2cdemux/__init__.py
index 265e5682edbfc2ca650323aabdb6b984c961c922..75fcd8607bb69c5a105f9b6cf579392a1e9381bb 100644 (file)
--- a/decoders/i2cdemux/__init__.py
+++ b/decoders/i2cdemux/__init__.py
@@ -25,4 +25,4 @@ It takes an I²C stream as input and outputs multiple I²C streams, each
 stream containing only I²C packets for one specific I²C slave.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/i2cfilter/__init__.py b/decoders/i2cfilter/__init__.py
index ddb16ffb17e4439e79ecd86d911384ccab7fab55..be97bf0a0f7e951cf543008046e16dde31a122bd 100644 (file)
--- a/decoders/i2cfilter/__init__.py
+++ b/decoders/i2cfilter/__init__.py
@@ -34,4 +34,4 @@ Both of these are optional; if no options are specified the entire payload
 of the I²C session will be output.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/i2s/__init__.py b/decoders/i2s/__init__.py
index 550a8c84f6231237ff40e445bcbfa85fc7c34923..e114cd0b973458c6dcefd7ab2367fe1331effbe9 100644 (file)
--- a/decoders/i2s/__init__.py
+++ b/decoders/i2s/__init__.py
@@ -27,4 +27,4 @@ http://www.nxp.com/acrobat_download/various/I2SBUS.pdf
 http://en.wikipedia.org/wiki/I2s
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/ir_nec/__init__.py b/decoders/ir_nec/__init__.py
index 076566874fc4aa964470cfe5caf73e3508fc4cda..6b15f1944a71eb3fc420566045125d324936c544 100644 (file)
--- a/decoders/ir_nec/__init__.py
+++ b/decoders/ir_nec/__init__.py
@@ -22,4 +22,4 @@
 NEC is a pulse-distance based infrared remote control protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/ir_rc5/__init__.py b/decoders/ir_rc5/__init__.py
index d94824d278ccc40ae0b199613f4e6e6e58c12df9..8f5f5a3715b6781afd3e8fa4d4dba38c32b65d4c 100644 (file)
--- a/decoders/ir_rc5/__init__.py
+++ b/decoders/ir_rc5/__init__.py
@@ -22,4 +22,4 @@
 RC-5 is a biphase/manchester based infrared remote control protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/jtag/__init__.py b/decoders/jtag/__init__.py
index 0caf5aa70b79927442049aa2edb7e460dd60d398..863ef09abbfbf44220b30d6d12a0d112c8d00c40 100644 (file)
--- a/decoders/jtag/__init__.py
+++ b/decoders/jtag/__init__.py
@@ -28,4 +28,4 @@ https://en.wikipedia.org/wiki/Joint_Test_Action_Group
 http://focus.ti.com/lit/an/ssya002c/ssya002c.pdf
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/jtag_stm32/__init__.py b/decoders/jtag_stm32/__init__.py
index 2b091fb48e056a668321f3fe91aaf209a5cc579d..9d60c1cbc7be2e1c67b2f3c4be5d7e5a10476d7e 100644 (file)
--- a/decoders/jtag_stm32/__init__.py
+++ b/decoders/jtag_stm32/__init__.py
@@ -27,4 +27,4 @@ https://en.wikipedia.org/wiki/STM32
 http://www.st.com/internet/com/TECHNICAL_RESOURCES/TECHNICAL_LITERATURE/REFERENCE_MANUAL/CD00171190.pdf (e.g. chapter 31.7: "JTAG debug port")
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/lm75/__init__.py b/decoders/lm75/__init__.py
index 4105814ea36e4f274b6866fa8a3019e7a4f53baf..1026df1b030cac953ffd38d15887ce245e981676 100644 (file)
--- a/decoders/lm75/__init__.py
+++ b/decoders/lm75/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'i2c' PD and decodes the National LM75
 (and compatibles) temperature sensor protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/lpc/__init__.py b/decoders/lpc/__init__.py
index 986b550f0961ce7b056a36148e12103e5055d12c..2c2c430c66ac042af46287def3c57781fc1a0903 100644 (file)
--- a/decoders/lpc/__init__.py
+++ b/decoders/lpc/__init__.py
@@ -23,4 +23,4 @@ LPC (Low-Pin Count) is a protocol for low-bandwidth devices used on
 some PC mainboards, such as the "BIOS chip" or the so-called "Super I/O".
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/maxim_ds28ea00/__init__.py b/decoders/maxim_ds28ea00/__init__.py
index 750d6993d7c76aa4fc622b84da697f132844238d..049f96ab1cb5b18004c14a446ef916fde0d1c527 100644 (file)
--- a/decoders/maxim_ds28ea00/__init__.py
+++ b/decoders/maxim_ds28ea00/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'onewire_network' PD and decodes the
 Maxim DS28EA00 1-Wire digital thermometer protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/midi/__init__.py b/decoders/midi/__init__.py
index 19be493c162c79b199278db868e1434b681179ab..4dbcf96d8f23915a97d170b2acabf6acf47d92a3 100644 (file)
--- a/decoders/midi/__init__.py
+++ b/decoders/midi/__init__.py
@@ -26,4 +26,4 @@ MIDI is layered on top of the UART (async serial) protocol, with a fixed
 baud rate of 31250 baud (+/- 1%) and 8n1 settings. Bytes are sent LSB-first.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/mlx90614/__init__.py b/decoders/mlx90614/__init__.py
index 1814ac900acc103ddcd5d491677ba59ab9ef8466..e985c9107a610d7dbe469209fba0e4d8887a2444 100644 (file)
--- a/decoders/mlx90614/__init__.py
+++ b/decoders/mlx90614/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'i2c' PD and decodes the Melexis MLX90614
 infrared thermometer protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/mx25lxx05d/__init__.py b/decoders/mx25lxx05d/__init__.py
index 85d34344305e47ea62abb6e2cd14ecb582bb02b0..8ce72f601ba625c16746283a1eefa6c7f11e350d 100644 (file)
--- a/decoders/mx25lxx05d/__init__.py
+++ b/decoders/mx25lxx05d/__init__.py
@@ -28,4 +28,4 @@ Details:
 http://www.macronix.com/QuickPlace/hq/PageLibrary4825740B00298A3B.nsf/h_Index/3F21BAC2E121E17848257639003A3146/$File/MX25L1605D-3205D-6405D-1.5.pdf
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/mxc6225xu/__init__.py b/decoders/mxc6225xu/__init__.py
index c522711c0415557cf1e708136e8f6df8f2d66802..daeb89eb824bd59b3adece65ea5304ce5941fb6b 100644 (file)
--- a/decoders/mxc6225xu/__init__.py
+++ b/decoders/mxc6225xu/__init__.py
@@ -26,4 +26,4 @@ The chip's I²C interface supports standard mode and fast mode (max. 400kHz).
 Its I²C slave address is 0x2a.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/nrf24l01/__init__.py b/decoders/nrf24l01/__init__.py
index 4681abfff96b9bd4a841eb9a5bc0fbf46b03dc39..7b4d7485121a67f89d883489e1c0548aa50bdfb2 100644 (file)
--- a/decoders/nrf24l01/__init__.py
+++ b/decoders/nrf24l01/__init__.py
@@ -27,4 +27,4 @@ http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01
 http://www.nordicsemi.com/eng/Products/2.4GHz-RF/nRF24L01P
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/nunchuk/__init__.py b/decoders/nunchuk/__init__.py
index ef6a74a2507a088e7ba7d199264b4f293e03077e..c5791455d8df127c25635c15bf40d1f44c8d192e 100644 (file)
--- a/decoders/nunchuk/__init__.py
+++ b/decoders/nunchuk/__init__.py
@@ -28,4 +28,4 @@ http://todbot.com/blog/2008/02/18/wiichuck-wii-nunchuck-adapter-available/
 https://www.sparkfun.com/products/9281
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/onewire_link/__init__.py b/decoders/onewire_link/__init__.py
index 6248916cc2f09e285a92de113305eca86fbb235e..12aad259290b23db0b283c05fa4f852344dc53d0 100644 (file)
--- a/decoders/onewire_link/__init__.py
+++ b/decoders/onewire_link/__init__.py
@@ -65,4 +65,4 @@ These options should be configured only on very rare cases and the user should
 read the decoder source code to understand them correctly.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/onewire_network/__init__.py b/decoders/onewire_network/__init__.py
index 1d584efbbe4994ad5a1d6e1a8e72328e6171353d..44b9bcc700a1d3e57e8f55177b5e93968bd9e42a 100644 (file)
--- a/decoders/onewire_network/__init__.py
+++ b/decoders/onewire_network/__init__.py
@@ -54,4 +54,4 @@ TODO:
  - Add reporting original/complement address values from the search algorithm.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/pan1321/__init__.py b/decoders/pan1321/__init__.py
index 7aa20f05a5a6423a7912bc97f1ace48962f64548..c14236df4215cd9539f973fc10d034b2d8178c43 100644 (file)
--- a/decoders/pan1321/__init__.py
+++ b/decoders/pan1321/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'uart' PD and decodes the Panasonic PAN1321
 Bluetooth module Serial Port Profile (SPP) protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/parallel/__init__.py b/decoders/parallel/__init__.py
index ee8b4447d45db8c9ad448f5b59dc1791953189d0..a7077bb93363fbe286ad2c661d11a3cc5037b113 100644 (file)
--- a/decoders/parallel/__init__.py
+++ b/decoders/parallel/__init__.py
@@ -32,4 +32,4 @@ should be used. Using combinations like D7/D12/D3/D15 is not supported.
 For an 8-bit bus you should use D0-D7, for a 16-bit bus use D0-D15 and so on.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/rfm12/__init__.py b/decoders/rfm12/__init__.py
index 0ad72e5283614cacd881d4c614ee8c0aa998ff88..725d44387322f5466a418a747330766754bbc413 100644 (file)
--- a/decoders/rfm12/__init__.py
+++ b/decoders/rfm12/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'spi' PD and decodes the HopeRF RFM12
 wireless transceiver control protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/rgb_led_spi/__init__.py b/decoders/rgb_led_spi/__init__.py
index a5a7ad6766137271e1e1d73bb7a36cd71b26f009..c0e0ea19cf6ae51fbd0431fb8d5de8036a34992a 100644 (file)
--- a/decoders/rgb_led_spi/__init__.py
+++ b/decoders/rgb_led_spi/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'spi' PD and decodes generic RGB LED string
 values that are clocked over SPI in RGB values.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/rtc8564/__init__.py b/decoders/rtc8564/__init__.py
index 65aa6402ea5fc87c98f05c069756c57bb2926ee1..e2776a6a1d7d0b386acb79b77ee65188564ff01a 100644 (file)
--- a/decoders/rtc8564/__init__.py
+++ b/decoders/rtc8564/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'i2c' PD and decodes the Epson
 RTC-8564 JE/NB real-time clock (RTC) protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/sdcard_spi/__init__.py b/decoders/sdcard_spi/__init__.py
index 60f6d9853d09366e1ef41a22c8c4f009ef368214..7ce66bf968638bf2210d697933c2ee7844120811 100644 (file)
--- a/decoders/sdcard_spi/__init__.py
+++ b/decoders/sdcard_spi/__init__.py
@@ -66,4 +66,4 @@ SPI mode properties (differences to SD mode):
  * The RCA register is not accessible in SPI mode.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/spdif/__init__.py b/decoders/spdif/__init__.py
index 0e8d0591a00d1ead4f2bbe2f3cf5a36289ad5ddb..38363f0f30e825a121f7dea7f83d87d9bb9633b0 100644 (file)
--- a/decoders/spdif/__init__.py
+++ b/decoders/spdif/__init__.py
@@ -23,4 +23,4 @@ S/PDIF (Sony/Philips Digital Interface Format) is a serial bus for
 transmitting audio data.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/spi/__init__.py b/decoders/spi/__init__.py
index 65799059db73408eedcbbf87eae501d2b3cc399d..f76bb064fc8ca72773bae17bec531703496b88e3 100644 (file)
--- a/decoders/spi/__init__.py
+++ b/decoders/spi/__init__.py
@@ -29,4 +29,4 @@ transitions where CS# is not asserted are ignored). If CS# is not supplied,
 data is decoded on every clock transition (depending on SPI mode).
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/swd/__init__.py b/decoders/swd/__init__.py
index e6da90806cc3a860b1b760dc149a7c9c5b1fcb94..3a65143cac24bd0c472c96ff2df10240d14c94fd 100644 (file)
--- a/decoders/swd/__init__.py
+++ b/decoders/swd/__init__.py
@@ -32,4 +32,4 @@ Not supported:
  * SWD protocol version 2 (multi-drop support, etc.)
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/tca6408a/__init__.py b/decoders/tca6408a/__init__.py
index 9982d58bfaafe03e818d876943d7e10757c094fd..f679674e3e3cfe1e06e2eb60959f82c57f76da7b 100644 (file)
--- a/decoders/tca6408a/__init__.py
+++ b/decoders/tca6408a/__init__.py
@@ -23,4 +23,4 @@ This decoder stacks on top of the 'i2c' PD and decodes the Texas Instruments
 TCA6408A 8-bit I²C I/O expander protocol.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/tlc5620/__init__.py b/decoders/tlc5620/__init__.py
index 6992361b73546be4aa4f441425ea34d798fa6523..cb953853c64e5e682c408e4a58df77d4b904fd3e 100644 (file)
--- a/decoders/tlc5620/__init__.py
+++ b/decoders/tlc5620/__init__.py
@@ -22,4 +22,4 @@
 The Texas Instruments TLC5620 is an 8-bit quad DAC.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/uart/__init__.py b/decoders/uart/__init__.py
index d40a7c9cd8f9edd5f3c7db528439c3b5d369f541..efe0e523a8954df2696dadb0ee8829ada823d607 100644 (file)
--- a/decoders/uart/__init__.py
+++ b/decoders/uart/__init__.py
@@ -38,4 +38,4 @@ it though, no matter whether the source was on TTL UART levels, or RS232,
 or others.
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/usb_packet/__init__.py b/decoders/usb_packet/__init__.py
index e308652ebc62bca8755b629ec79bf0351995ff8a..f841d20b277098e304b5f62b22674be995c9d4e9 100644 (file)
--- a/decoders/usb_packet/__init__.py
+++ b/decoders/usb_packet/__init__.py
@@ -41,4 +41,4 @@ https://en.wikipedia.org/wiki/USB
 http://www.usb.org/developers/docs/
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/usb_signalling/__init__.py b/decoders/usb_signalling/__init__.py
index 1f6adbf0094a60c643e3bda21c3ad32b7d6b37d2..b2ceb4d69b9e6c6dcd19621825f59bd77c370aff 100644 (file)
--- a/decoders/usb_signalling/__init__.py
+++ b/decoders/usb_signalling/__init__.py
@@ -48,4 +48,4 @@ https://en.wikipedia.org/wiki/USB
 http://www.usb.org/developers/docs/
 '''
 
-from .pd import *
+from .pd import Decoder

diff --git a/decoders/xfp/__init__.py b/decoders/xfp/__init__.py
index 664967df6e9c78e295e6c2c8b4e2a64b5132478a..51936e5537052eb23837c420cbd556be2a9cc85e 100644 (file)
--- a/decoders/xfp/__init__.py
+++ b/decoders/xfp/__init__.py
@@ -37,4 +37,4 @@ The XFP specification is available here:
   ftp://ftp.seagate.com/sff/INF-8077.PDF
 '''
 
-from .pd import *
+from .pd import Decoder