Move USB HID dumps to usb/hid/ subdir.

diff --git a/usb/hid/lisa_m_usbhid/README b/usb/hid/lisa_m_usbhid/README
new file mode 100644 (file)
index 0000000..deaf551
--- /dev/null
+++ b/usb/hid/lisa_m_usbhid/README
@@ -0,0 +1,37 @@
+-------------------------------------------------------------------------------
+Lisa/M USB HID example (USB Full-Speed and SPI)
+-------------------------------------------------------------------------------
+
+This capture is taken from the libopencm3 example for a USB HID device on the
+Paparazzi Lisa/M board. In this applicaton an SPI accellerometer is read and
+the values are transmitted on a USB IN endpoint as mouse movement.
+
+Details:
+http://libopencm3.org
+http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/lisa-m/usb_hid
+http://paparazzi.enac.fr/wiki/User/LisaM
+
+
+Logic analyser setup
+--------------------
+
+The logic analyzer used was an Openbench Logic Sniffer (at 50MHz):
+
+  Probe    Signal
+  ---------------
+  0        USB_DM
+  1        USB_DP
+  2        SPI_NCS
+  3        SPI_SCK
+  4        SPI_MOSI
+  5        SPI_MISO
+
+The sigrok command line used was:
+
+  sigrok-cli -d 0:samplerate=50mhz:rle=on \
+             -p 1=USB_DM,2=USB_DP,3=SPI_NCS,4=SPI_SCK,5=SPI_MOSI,6=SPI_MISO \
+             --time=50ms -o lisa_m_usb_spi.sr
+
+The OLS can't actually capture 50ms, so it just captures as much as it can
+buffer. No triggering was used.
+

diff --git a/usb/hid/lisa_m_usbhid/lisa_m_usb_spi.sr b/usb/hid/lisa_m_usbhid/lisa_m_usb_spi.sr
new file mode 100644 (file)
index 0000000..33610fe
Binary files /dev/null and b/usb/hid/lisa_m_usbhid/lisa_m_usb_spi.sr differ

diff --git a/usb/hid/olimex_stm32-h103_usb_hid/README b/usb/hid/olimex_stm32-h103_usb_hid/README
new file mode 100644 (file)
index 0000000..b4959cd
--- /dev/null
+++ b/usb/hid/olimex_stm32-h103_usb_hid/README
@@ -0,0 +1,36 @@
+-------------------------------------------------------------------------------
+USB HID
+-------------------------------------------------------------------------------
+
+This is a set of example captures of USB/HID communication on an Olimex
+STM32-H103 eval board with an ST STM32 (ARM Cortex-M3) microcontroller.
+
+The firmware on the board is a simple libopencm3 example named 'usb_hid'
+which lets the mouse curser move a small amount to the left and then back
+to the right in an infinite loop.
+
+Details:
+http://olimex.com/dev/stm32-h103.html
+http://libopencm3.org
+http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/stm32-h103/usb_hid
+
+
+Logic analyzer setup
+--------------------
+
+The logic analyzer used was a ChronoVu LA8 (at 100MHz):
+
+  Probe       STM32-H103
+  ----------------------
+  6 (blue)    DM
+  7 (yellow)  DP
+
+
+olimex_stm32-h103_usb_hid.sr
+----------------------------
+
+The sigrok command line used was:
+
+  sigrok-cli -d 0:samplerate=100mhz --samples 8388608 \
+             -p '7=DM,8=DP' -o <filename>
+

diff --git a/usb/hid/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr b/usb/hid/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr
new file mode 100644 (file)
index 0000000..88c0b1c
Binary files /dev/null and b/usb/hid/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr differ

diff --git a/usb/lisa_m_usbhid/README b/usb/lisa_m_usbhid/README
deleted file mode 100644 (file)
index deaf551..0000000
--- a/usb/lisa_m_usbhid/README
+++ /dev/null
@@ -1,37 +0,0 @@
--------------------------------------------------------------------------------
-Lisa/M USB HID example (USB Full-Speed and SPI)
--------------------------------------------------------------------------------
-
-This capture is taken from the libopencm3 example for a USB HID device on the
-Paparazzi Lisa/M board. In this applicaton an SPI accellerometer is read and
-the values are transmitted on a USB IN endpoint as mouse movement.
-
-Details:
-http://libopencm3.org
-http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/lisa-m/usb_hid
-http://paparazzi.enac.fr/wiki/User/LisaM
-
-
-Logic analyser setup
---------------------
-
-The logic analyzer used was an Openbench Logic Sniffer (at 50MHz):
-
-  Probe    Signal
-  ---------------
-  0        USB_DM
-  1        USB_DP
-  2        SPI_NCS
-  3        SPI_SCK
-  4        SPI_MOSI
-  5        SPI_MISO
-
-The sigrok command line used was:
-
-  sigrok-cli -d 0:samplerate=50mhz:rle=on \
-             -p 1=USB_DM,2=USB_DP,3=SPI_NCS,4=SPI_SCK,5=SPI_MOSI,6=SPI_MISO \
-             --time=50ms -o lisa_m_usb_spi.sr
-
-The OLS can't actually capture 50ms, so it just captures as much as it can
-buffer. No triggering was used.
-

diff --git a/usb/lisa_m_usbhid/lisa_m_usb_spi.sr b/usb/lisa_m_usbhid/lisa_m_usb_spi.sr
deleted file mode 100644 (file)
index 33610fe..0000000
Binary files a/usb/lisa_m_usbhid/lisa_m_usb_spi.sr and /dev/null differ

diff --git a/usb/olimex_stm32-h103_usb_hid/README b/usb/olimex_stm32-h103_usb_hid/README
deleted file mode 100644 (file)
index b4959cd..0000000
--- a/usb/olimex_stm32-h103_usb_hid/README
+++ /dev/null
@@ -1,36 +0,0 @@
--------------------------------------------------------------------------------
-USB HID
--------------------------------------------------------------------------------
-
-This is a set of example captures of USB/HID communication on an Olimex
-STM32-H103 eval board with an ST STM32 (ARM Cortex-M3) microcontroller.
-
-The firmware on the board is a simple libopencm3 example named 'usb_hid'
-which lets the mouse curser move a small amount to the left and then back
-to the right in an infinite loop.
-
-Details:
-http://olimex.com/dev/stm32-h103.html
-http://libopencm3.org
-http://libopencm3.git.sourceforge.net/git/gitweb.cgi?p=libopencm3/libopencm3;a=tree;f=examples/stm32/f1/stm32-h103/usb_hid
-
-
-Logic analyzer setup
---------------------
-
-The logic analyzer used was a ChronoVu LA8 (at 100MHz):
-
-  Probe       STM32-H103
-  ----------------------
-  6 (blue)    DM
-  7 (yellow)  DP
-
-
-olimex_stm32-h103_usb_hid.sr
-----------------------------
-
-The sigrok command line used was:
-
-  sigrok-cli -d 0:samplerate=100mhz --samples 8388608 \
-             -p '7=DM,8=DP' -o <filename>
-

diff --git a/usb/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr b/usb/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr
deleted file mode 100644 (file)
index 88c0b1c..0000000
Binary files a/usb/olimex_stm32-h103_usb_hid/olimex_stm32-h103_usb_hid.sr and /dev/null differ