eeprom_24xx: add sample Xicor X24C02 capture

diff --git a/i2c/eeprom_24xx/xicor_x24c02/README b/i2c/eeprom_24xx/xicor_x24c02/README
new file mode 100644 (file)
index 0000000..2baa60a
--- /dev/null
+++ b/i2c/eeprom_24xx/xicor_x24c02/README
@@ -0,0 +1,9 @@
+This is traffic captured off an internal I2C bus of a Tektronix TDS 744A
+oscilloscope.
+
+On this bus there are two X24C02 EEPROMs, mapped at addresses 0 and 1.
+
+The I2C decoder will show the shifted addresses as 0x50 and 0x51 respectively.
+
+The decoded traffic consists of some initial reads, some (failed) probes of an
+inexistant device at address 0x52, then two block reads of 248 and 192 bytes.

diff --git a/i2c/eeprom_24xx/xicor_x24c02/x24c02_dual.sr b/i2c/eeprom_24xx/xicor_x24c02/x24c02_dual.sr
new file mode 100644 (file)
index 0000000..f803987
Binary files /dev/null and b/i2c/eeprom_24xx/xicor_x24c02/x24c02_dual.sr differ