fx2lafw: Code cleanup.

diff --git a/src/hardware/fx2lafw/protocol.c b/src/hardware/fx2lafw/protocol.c
index 64b440f642076a49916bd00770403693370bf447..dfd58becebc6ea184f5f88d146d404990854c866 100644 (file)
--- a/src/hardware/fx2lafw/protocol.c
+++ b/src/hardware/fx2lafw/protocol.c
@@ -87,21 +87,25 @@ static int command_get_revid_version(struct sr_dev_inst *sdi, uint8_t *revid)
 
 SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi)
 {
-       struct dev_context *devc = sdi->priv;
-       struct sr_usb_dev_inst *usb = sdi->conn;
-       libusb_device_handle *devhdl = usb->devhdl;
-       uint64_t samplerate = devc->cur_samplerate;
-       gboolean samplewide = devc->sample_wide;
-       struct cmd_start_acquisition cmd = { 0 };
-       int delay = 0, ret;
+       struct dev_context *devc;
+       struct sr_usb_dev_inst *usb;
+       uint64_t samplerate;
+       struct cmd_start_acquisition cmd;
+       int delay, ret;
+
+       devc = sdi->priv;
+       usb = sdi->conn;
+       samplerate = devc->cur_samplerate;
 
        /* Compute the sample rate. */
-       if (samplewide && samplerate > MAX_16BIT_SAMPLE_RATE) {
+       if (devc->sample_wide && samplerate > MAX_16BIT_SAMPLE_RATE) {
                sr_err("Unable to sample at %" PRIu64 "Hz "
                       "when collecting 16-bit samples.", samplerate);
                return SR_ERR;
        }
 
+       delay = 0;
+       cmd.flags = cmd.sample_delay_h = cmd.sample_delay_l = 0;
        if ((SR_MHZ(48) % samplerate) == 0) {
                cmd.flags = CMD_START_FLAGS_CLK_48MHZ;
                delay = SR_MHZ(48) / samplerate - 1;
@@ -126,11 +130,11 @@ SR_PRIV int fx2lafw_command_start_acquisition(const struct sr_dev_inst *sdi)
        cmd.sample_delay_l = delay & 0xff;
 
        /* Select the sampling width. */
-       cmd.flags |= samplewide ? CMD_START_FLAGS_SAMPLE_16BIT :
+       cmd.flags |= devc->sample_wide ? CMD_START_FLAGS_SAMPLE_16BIT :
                CMD_START_FLAGS_SAMPLE_8BIT;
 
        /* Send the control message. */
-       ret = libusb_control_transfer(devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
+       ret = libusb_control_transfer(usb->devhdl, LIBUSB_REQUEST_TYPE_VENDOR |
                        LIBUSB_ENDPOINT_OUT, CMD_START, 0x0000, 0x0000,
                        (unsigned char *)&cmd, sizeof(cmd), 100);
        if (ret < 0) {